Log entry time 08:54:06 on July 30, 2003

Entry number 108158

Beginning-of-run EPICS data for Run Number 3046 at Wed Jul 30 08:53:50 EDT 2003
; RIGHT SPECTROMETER  on adaql2 computer on a-onl account.
; Prescale factors (integer), downloaded each run at prestart.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; The default factor is essentially infinite. 
; ps8 = 65535 turns off the 1 kHz pulser on T8.
; Keep enough T2 to measure efficiency
; PS1 for the Right spectrometer T1 defined by S1.and.S2
; PS2 for the Right spectrometer T2 defined by Cerenkov/S1/S2 majority
; PS8 for 1024 Hz pulser ( keep this at <= 100)
; Trig 9 = 30 Hz, and you cannot prescale it.
ps1=35,ps2=20,ps3=9999,ps4=9999,ps5=65535,ps6=65535,ps7=65535,ps8=65535 
Right septum set current : 197
Right septum current readback : 196.75
Right Arm Q1 power supply current :
Right Arm Q1 momentum : 2.12495
Right Arm Q1 gauss meter : -0.03174
Right Arm Q1 power supply polarity :
Right Arm Q2 power supply current : 922.098
Right Arm Q2 momentum : 2.1249
Right Arm Q2 gauss meter : 0.4846
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 741.097
Right Arm D1 momentum : 2.125
Right Arm D1 NMR : 0.788561
Right Arm Q3 power supply current : 995.011
Right Arm Q3 momentum : 2.12477
Right Arm Q3 gauss meter : 0.4465
Right Arm Q3 power supply polarity : disabled
Right Arm Top VDC Current :
Right Arm Bottom VDC Current :
Right Arm Top VDC voltage : 4.00195
Right Arm Bottom VDC voltage : 3.99902
Average current of the two cavities : 1.07312
Current on Unser monitor : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. -13.7208
Current on Upstream bcm : 1.05147
Current on Downstream bcm : 1.06019
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) : 73.8028
Tiefenbach Hall A energy : 0
Tiefenbach Hall C energy : 0
Delta(E)/E width (MV_AI_DXWID) : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
HALLA:p : 2134.62
HALLA:dpp : -0.000177309
MBSY1c Hall A Beam energy : 2137.4
MBSY3c Hall C Beam energy : 5261.07
MBSY1c magnet current (amp) : 88.9385
MBSY1c Bdl : 533390
Arc1 dp/p : 0
Arc2 dp/p : 0
Right Arm Arm Collimator : -0.000244141
Right LVDT HPM : 3279
Right LVDT VPM : 3872
HacR_HPE1313A:0_Ch58 : -0.555176
HacR_HPE1313A:0_Ch55 : 22.0703
HacR_HPE1313A:0_Ch54 : -0.904297
HacR_alignROLL : -0.42499
HacR_alignPITCH : -0.000988543
HacR_alignHPT : -0
Right Arm Angle Floor Angle : 12.5
Right Arm Angle Vernier : -33.9
Right Arm Scattering Angle : 12.5016
IPM1C12.XPOS : 0.655674
IPM1C12.YPOS : 0.133721
IPM1H04A.XPOS : 0.00548715
IPM1H04A.YPOS : 0.037537
IPM1H04B.XPOS : -0.00203796
IPM1H04B.YPOS : 0.0713859
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
Wien angle : -72.5251
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : -1698.5
Wien field : 48.325
Laser attenuation Hall A : 221
Laser power Hall A : 71
Half-wave plate (off=out) : OUT
rotating waveplate : 7000
Beam Half-wave plate (off=out) : OUT
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : No Delay
G0 Helicity Pattern Set : Quartet
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : No Delay
G0 Helicity Pattern : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. Quartet
Target OTR x-position : 3.7987
Target OTR y-position :
Target OTR x-width : 0.380987
Target OTR y-width : 0.533125
Target OTR data valid flag : No
Target OTR In/Out : MaxPix is Bad
Arc OTR x-position : -2.47035
Arc OTR y-position : -0.143754
Arc OTR x-width : 3.62183
Arc OTR y-width : 1.9188
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out
Polarized 3He Coil Current Longitudinal : -6.977
Polarized 3He Coil Current Transverse : -0.044
Transverse gradient coils (A) setup current : 0
Transverse gradient coils (A) readback current : 0.000915527
Longitudinal upstream gradient coil (B) setup current : 0
Longitudinal upstream gradient coil (B) readback current : 0.00671387
Longitudinal downstream gradient coil (C) setup current : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 0
Longitudinal downstream gradient coil (C) readback current : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. -0.000915527
Small vertical gradient coils (D) setup current : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 0
Small vertical gradient coils (D) readback current : 0