How to's ...

How to's ...

You will find here the whole set of the procedures to run, calibrate or debug compton polarimeter devices.
1	How to start the CODA acquisition using Runcontrol ?
2	How to start EPICS control panel ?
3	How to switch the Laser on ?
4	How to start the acquisition control panel, the so-called spy_acq ?
5	How to check the high voltages applied on the Photon detector PMT ?
6	How to set the High Voltage on the Photon detector PMT ?
7	How to unlock safely and manually the cavity ?
8	How to be sure that electron detector is on the garage position ?
9	How to switch the chicane on after a shutdown ?
10	How to lock the cavity when the optical device is already in use ?
11	How to perform a vertical scanning of the electron beam inside the chicane to maximize the luminosity ?
12	How to switch on the electron detector ?
13	How to check that the electron detector channels are working well ?
14	How to perform a wire scanning of the electron detector ?
15	How to switch off the electron detector ?
16	How to set the electron detector on the "garage" position ?
17	How to set the electron detector in the beam ?
18	How to switch off the PMT high voltage of the Compton polarimeter ?
19	How to switch off the laser ?
20	How to switch off the chicane for a foreseen shutdown or maintenance days ?