To turn the Laser On .... Click on the Laser On button.
Check LASER STATUS and INCIDENT POWER.
A Laser spot may blink on the CCD control TV screen (second from left among the 4 screens)
and you should see a bright spot on the miror control TV screen (last one on the right).
If Laser doesn't turns ON most problable problem is an interlock
fault.
You need an access in Hall A and check the different parts of the
laser interlock around the optic table:
*Two crash buttons on the left wall, inside and outside the green
tent.
*The optic table is protected by a metallic cover. Four magnetic switches connect the top and the walls
of this cover. Some of them might be opened. CAUTION!!: you are standing close to the optic table.
Do not try to open the cover. Just move the top carefully sideways to try to close the switches.
|
