• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name adaq

    Log entry time 12:18:25 on May 11, 2017

    Entry number 420748

    keyword=End_of_Run_15172
    No comment file.  Making halog file at Thu May 11 12:18:24 EDT 2017
    End-of-run EPICS data for Run Number 15172 at Thu May 11 12:18:02 EDT 2017
    
    

    Right and Left MLU settings

    Left MLU settings 0 0xffff time of Left HRS MLU last setting 19 at 11:04 Right MLU settings 0 0xffff time of Right HRS MLU last setting 19 at 11:03 The meaning of the settings is documented elsewhere; briefly: first number is 0 or 1 0 = standard GMp trigger 1 = single detector trigger second number is a bit mask bit=1 means output is enabled bit=0 means output is disabled only last 8 bits are relevant for NIM output

    General Run Info

    ------

    Beam Energy Information:

    Set Beam energy (MeV) : 2218.49 Tiefenbach 6GeV Beam energy (MeV) : 2218.66 Tiefenbach 6GeV orbit correction (dpp) : 0 Injector Measured Energy : 0 Average North Linac Measured Energy : 1091.26 Average South Linac Measured Energy : 1049.52333333333333 MBSY1c Magnet Current : 4 MBSY1c Bdl : 554319 Hall A ARC Current : 0 Hall A ARC Set Current : 92.5878 Lock [Y/N] : NO Position [mm] : 1604 Field [T] :0.195994 IPM1C12.XPOS : 0 ------ Beam Current : 0.0491609 ------ Left arm angle : -0.179 Left arm momentum : 0.00267962 Right arm angle : 0.197 Right arm momentum : 0.0029755 ------ Fast Raster-A Ix : 0 Fast Raster-A Iy : 0 Fast Raster-B Ix : 0 Fast Raster-B Iy : 0

    Misc Epics Info

    ----- Left Arm Q1 momentum : 0 Left Arm Q1 power supply (readback) : 0 Left Arm Q1 power supply (set point) : 0 Left Arm Q1 gauss meter : -0.00073278 Left Arm Q2 power supply current : -0.000423049 Left Arm Q2 momentum : -7.73799e-07 Left Arm Q2 gauss meter : 0.0003069 Left Arm Q2 power supply polarity : enabled Left Arm D1 power supply current : 0.0002478 Left Arm D1 momentum : 0.00267962 Left Arm D1 NMR : 0.302735 Left Arm Q3 power supply current : -0.000404517 Left Arm Q3 momentum : -1.06226e-06 Left Arm Q3 gauss meter : 0.0006304 Left Arm Q3 power supply polarity : enabled Left Arm B Field Hall Probe (D-G) : -0.0009605 ----- Average current of the two cavities : 0.0491609 Current on Upstream bcm : 0.0577632 Current on Downstream bcm : 0.0405587 Upstream Cavity Coefficient : 36.65 Downstream Cavity Coefficient : 32.45 Raw Upstream Signal (new receiver) : 40 Raw Downstream Signal (new receiver) : 4 --- IPM1H04A.XPOS : 0 IPM1H04A.YPOS : 0 IPM1H04E.XPOS : 0 IPM1H04E.YPOS : 0 --- Moeller quadrupole currents: MQK1H01M : -0.00298514 MQO1H02M : 2.9011 MQM1H02M : 2.82051 MQO1H03M : 0 MQO1H03AM : 2.98168 MQA1H04M : 0.0631714 ----- Wien angle (Vertical) : 0 Wien Vertical BDL (Gcm) : 9.37619e-06 Wien HV Polarity : POSITIVE Wien electrode Voltage : 0 Wien angle (Solenoids) : -0.0302736 Wien BDL (First Solenoid) (Gcm) : 1008 Wien BDL (Second Solenoid) (Gcm) : -1008.67 Wien angle (Horizontal) : 88.9994 Wien BDL (Gcm) : 2580.5 Wien HV Polarity (Horizontal) : POSITIVE Wien electrode Voltage (Horizontal) : 0 Laser attenuation Hall A : 99.9985 Laser power Hall A : 0 Rotating waveplate : 577.995 Fake Half-Wave Plate (8960=OUT) : 0 Beam Half-wave plate (off=out) : IN ----- Helicity Delay Set : No Delay Helicity Pattern Set : Quartet Helicity Clock Set : Free Clock Helicity Settle Read : 500 Helicity Stable Read : 33330 Helicity Delay Read : No Delay Helicity Pattern : Quartet Helicity Clock Read : Free Clock Helicity Frequency : 29.5596 ----- target OTR In/Out : Out

    Target Info

    ----- Target : Argon Cell fan frequency loop 1 : 0 fan frequency loop 2 : 0 fan frequency loop 3 : 0 Encoder position : 2.17435e-38 Target type : 2.17435e-38 temperature loop 1(1) : 5.889 temperature loop 1(2) : 5.889 temperature loop 1(3) : 5.889 Heat exchange loop 1 H2 : 5.889 temperature loop 2(1) : 5.721 temperature loop 2(2) : 5.782 temperature loop 2(3) : 5.721 Heat exchange loop 2 LH2 : 5.721 temperature loop 3(1) : 689.07 temperature loop 3(2) : 688.89 temperature loop 3(3) : 0 Heat exchange loop 3 H2 : 688.74 pressure loop H2 before : 13.8079 pressure loop H2 return : 16.4462 pressure loop H2 before : 14.406 pressure loop H2 return : 14.9264 HPH loop 1 : 2.72634 HPH loop 2 : 2.20341 HPH loop 3 : 0.420589

    DVCS Calorimeter

    Measured HV voltages Measured HV currents Measured HV for DVCS Cosmic paddels ------------------------------------------------------------------- DVCS Cosmic Padels TOP TOP1: Error open connection(PID:0) : err-3 : errno=22 TOP2: Error open connection(PID:0) : err-3 : errno=22 DVCS Cosmic Padels BOTTOM BOTTOM1: Error open connection(PID:0) : err-3 : errno=22 BOTTOM2: Error open connection(PID:0) : err-3 : errno=22 ------------------------------------------------------------------- Measured anode currents: block number iochacs (129.57.242.13) needs to be reboot Please see DVCS HOW-TO wiki for reboot IOC

    LHRS Detector High Voltage and Current

    S0 A B Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' S2m 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L Set HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R Set HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:16 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Cherenkov 1 2 3 4 5 6 7 8 9 10 Set HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:2,1:5 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' PRL1 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L Set HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R Set HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' PRL2 18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L Set HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' 18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R Set HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 2:2,1:17 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' VDC 1 2 Set HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:2 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Straw Chamber 1 2 3 4 5 6 Set HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' Read HV (V) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.' I (uA) *** Map name 1:1,1:6 is missing or not properly set in the server list : /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli - program to communicate with HV mainframe. usage: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'} HV_ hostname - name(or IP address) of HV mainframe HV_Port - number of HV port for TCP/IP connetction(1090 default) 'command_message' - message for sending to HV mainframe(string with quotas) Examples: Send command to HV mainframe 'hallahv1': /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.' Send command to control program running on 'adaqel1' for setup voltage on HVframe 0: /adaqfs/home/adev/slowc/hvg.newAug2014/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'