• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name adaq

    Log entry time 16:18:24 on October 3, 2017

    Entry number 422826

    keyword=Start_Run_51,Run_type=Other,target_type=Home(no target, or empty),comment_text=checking 4th fADC :mode 10 & clock trigger
    Run Timestamp:       Tue Oct  3 16:17:18 EDT 2017
    CODA Config : LHRStritium
    Beginning-of-run EPICS data for Run Number 51 at Tue Oct 3 16:17:58 EDT 2017
    

    Shift Worker Info

    Run_type=Other target_type=Home(no target, or empty) comment_text=checking 4th fADC :mode 10 & clock trigger

    Prescale Values

    ;This file is automatically generated from L-HRS prescales GUI. ;To generate this file, type "prescaleL" without quotes on adaq@adaq1 ;Input the desired prescales and Save. ;T1 = L-arm s0 && S2m trigger ;T2 = L-arm s0 && GC trigger ;T3 = L-arm s2 && GC trigger ;T4 = L-arm s0 && Shower trigger ;T5 = L-arm s2m && Shower trigger ;T6 = L-arm GC && Shower trigger ;T7 = L-arm EDTM trigger ;T8 = 103.7 KHz pulser ;T9 = DVCS trigger ;T10 = Misc. trigger ;T11 = Unknown trigger ;T12 = Unknown trigger ps1=0,ps2=0,ps3=0,ps4=0,ps5=0,ps6=0,ps7=0,ps8=100,ps9=0,ps10=0,ps11=0,ps12=0

    Right and Left MLU settings

    Left MLU settings 0 0xffff time of Left HRS MLU last setting Aug 3 at 15:32 Right MLU settings 0 0xffff time of Right HRS MLU last setting Aug 3 at 15:32 The meaning of the settings is documented elsewhere; briefly: first number is 0 or 1 0 = standard GMp trigger 1 = single detector trigger second number is a bit mask bit=1 means output is enabled bit=0 means output is disabled only last 8 bits are relevant for NIM output

    DVCS Trigger Status

    General Run Info

    ------

    Beam Energy Information:

    Set Beam energy (MeV) : 4318.49 Tiefenbach 6GeV Beam energy (MeV) : 2218.66 Tiefenbach 6GeV orbit correction (dpp) : 0 Injector Measured Energy : 0 Average North Linac Measured Energy : 1091.26 Average South Linac Measured Energy : 1049.52333333333333 MBSY1c Magnet Current : 565 MBSY1c Bdl : 554319 Hall A ARC Current : 564.751 Hall A ARC Set Current : 92.5878 Lock [Y/N] : NO Position [mm] : 1604 Field [T] :0.195994 IPM1C12.XPOS : 0 ------ Beam Current : 0.0596202 ------ Left arm angle : 24.4564 Left arm momentum : 0.00219052 Right arm angle : 0.197 Right arm momentum : 0.00274085 ------ Fast Raster-A Ix : -15 Fast Raster-A Iy : 14 Fast Raster-B Ix : 0 Fast Raster-B Iy : 2

    Misc Epics Info

    Left Arm Q1 momentum : 0 Left Arm Q1 power supply (readback) : 0 Left Arm Q1 power supply (setpoint) : 850 Left Arm Q1 gauss meter : 0.00705 Left Arm Q2 power supply current : -0.000172215 Left Arm Q2 momentum : -6.43384e-07 Left Arm Q2 gauss meter : 0.0003153 Left Arm Q2 power supply polarity : enabled Left Arm D1 power supply current : 0.0417586 Left Arm D1 momentum : 0.00219052 Left Arm D1 NMR : 0.301684 Left Arm Q3 power supply current : -0.000430259 Left Arm Q3 momentum : -6.65065e-07 Left Arm Q3 gauss meter : 0.00055336 Left Arm Q3 power supply polarity : enabled Left Arm B Field Hall Probe (D-G) : -0.0007869 ----- Average current of the two cavities : 0.0596202 Current on Upstream bcm : 0.0642886 Current on Downstream bcm : 0.0548833 Upstream Cavity Coefficient : 42.6 Downstream Cavity Coefficient : 43.8 Set Gain on Upstream bcm (new receiver): 5 Set Gain on Downstream bcm (new receiver) : 5 Readback Gain on Upstream bcm (new receiver): 1280 Readback Gain on Downstream bcm (new receiver) : 1280 Upstream Cavity Coefficient (new receiver) : 0 Downstream Cavity Coefficient (new receiver) : 0 Upstream Pedestal (new receiver): 0 Downstream Pedestal (new receiver) : 0 DACSL1 A (new receiver): 2 DACSL1 B (new receiver) : 2 DACSL2 A (new receiver): 2 DACSL2 B (new receiver) : 2 ----- Raw Upstream Signal (new receiver): 36 Raw Downstream Signal (new receiver) : 12 Current on Upstream bcm (new receiver) in uA: 0 Current on Downstream bcm (new receiver) in uA: 0 ----- HacL_HPE1313A:0_Ch58 : -0.191895 HacL_HPE1313A:0_Ch55 : 22.8027 HacL_HPE1313A:0_Ch54 : -0.288086 Left Arm Angle Floor Angle : 24.5 Left Arm Angle Vernier : 23.5 Left Arm Scattering Angle : 24.4564 Left Arm Collimator encoder :0.0609375 ----- Right Arm Angle Floor Angle : 0 Right Arm Angle Vernier : 0 Right Arm Scattering Angle : 0.197 ----- IPM1H04A.XPOS : 0 IPM1H04A.YPOS : 0 IPM1H04B.XPOS : 0 IPM1H04B.YPOS : 0 Survey X offset bpmA : 0 Survey Y offset bpmA : 0 Survey X offset bpmB : 0 Survey Y offset bpmB : 0 ----- Wien angle (Vertical) : 0 Wien Vertical BDL (Gcm) : 9.37619e-06 Wien HV Polarity : POSITIVE Wien electrode Voltage : 0 Wien angle (Solenoids) : 0.000547177 Wien BDL (First Solenoid) (Gcm) : 958 Wien BDL (Second Solenoid) (Gcm) : -957.988 Wien angle (Horizontal) : 0 Wien BDL (Gcm) : -7.66356e-06 Wien HV Polarity (Horizontal) : POSITIVE Wien electrode Voltage (Horizontal) : 0 Laser attenuation Hall A : 100.013 Laser power Hall A : 0 Rotating waveplate : 0 Fake Half-Wave Plate (8960=OUT) : 9023 Beam Half-wave plate (off=out) : OUT ----- Helicity Delay Set : No Delay Helicity Pattern Set : Octet Helicity Clock Set : 30 Hz LineSync Helicity Settle Read : 100 Helicity Stable Read : 33233.3 Helicity Delay Read : No Delay Helicity Pattern : Octet Helicity Clock Read : 30 Hz LineSync Helicity Frequency : 30 ----- target OTR In/Out : Out ----- Moeller quadrupole currents: MQK1H01M : 0 MQO1H02M : 2.9011 MQM1H02M : 2.65934 MQO1H03M : 0 MQO1H03AM : 3.06227 MQA1H04M : 0.000610352 -----

    Target Info

    ----- Target : Argon Cell fan frequency loop 1 : 0 fan frequency loop 2 : 0 fan frequency loop 3 : 0 Encoder position : 2.17435e-38 Target type : 2.17435e-38 temperature loop 1(1) : 5.889 temperature loop 1(2) : 5.889 temperature loop 1(3) : 5.889 Heat exchange loop 1 H2 : 5.889 temperature loop 2(1) : 5.721 temperature loop 2(2) : 5.782 temperature loop 2(3) : 5.721 Heat exchange loop 2 LH2 : 5.721 temperature loop 3(1) : 689.07 temperature loop 3(2) : 688.89 temperature loop 3(3) : 0 Heat exchange loop 3 H2 : 688.74 pressure loop H2 before : 0 pressure loop H2 return : 0 pressure loop H2 before : 0 pressure loop H2 return : 0 HPH loop 1 : 2.93399 HPH loop 2 : 2.33422 HPH loop 3 : 0.429235

    DVCS Calorimeter

    Measured HV voltages Measured HV currents Measured HV for DVCS Cosmic paddels ------------------------------------------------------------------- DVCS Cosmic Padels TOP TOP1: TOP2: DVCS Cosmic Padels BOTTOM BOTTOM1: BOTTOM2: ------------------------------------------------------------------- Measured anode currents: iochacs (129.57.242.13) needs to be reboot Please see DVCS HOW-TO wiki for reboot IOC

    LHRS Detector High Voltage and Current

    S0 A B Set HV (V) Read HV (V) I (uA) S2m 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L Set HV (V) Read HV (V) I (uA) 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R Set HV (V) Read HV (V) I (uA) Cherenkov 1 2 3 4 5 6 7 8 9 10 Set HV (V) Read HV (V) I (uA) PRL1 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L Set HV (V) Read HV (V) I (uA) 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R Set HV (V) Read HV (V) I (uA) PRL2 18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L Set HV (V) Read HV (V) I (uA) 18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R Set HV (V) Read HV (V) I (uA) VDC 1 2 Set HV (V) Read HV (V) I (uA) Straw Chamber 1 2 3 4 5 6 Set HV (V) Read HV (V) I (uA)