Last updated: 18 September1997
The following plot shows the acceptance, phi0 (horizontal) as a function of theta0 (vertical) for a point target at y0=0 for the "standard tune" of the spectrometer, using field settings as used in the commissioning of September 1996, with quadrupole field gradients and effective lengths as measured by the QMM collaboration, and using the best of our current understanding of the configuration of the dipole field. Also input was the best of our present knowledge of the locations and sizes of the defining apertures in the spectrometer. Please note that no solid angle defining slit in front of Q1 was considered. In that case the slit will add further limitations to the acceptance, especially as y0 increases for extended targets.
In the calculations a working model of the spectrometer was setup as an input directive file for the program SNAKE and then a systematic search at each value of momentum was performed in order to find the maximum allowable value of phi (f) for each of 14 values of theta (q) ranging from -65 to 65 mr in 10 mr steps. The minimum step taken in phi was 1 mr. Actual numerical results with limiting apertures are shown below:
d= +4.50% d= +2.25% d= 0.00% d= -2.25% d= -4.50%
q f limit q f limit q f limit q f limit q f limit
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
-55 0 Dip. -55 23 Q1 -55 23 Q1 -55 23 Q1 -55 0 Q3
Entr. exit
-45 26 Dip. -45 27 Dip. -45 28 Q1 -45 28 Q1 -45 0 Q3
Entr. Entr. exit
-35 26 Dip. -35 27 Dip. -35 29 Dip. -35 30 Dip. -35 0 Q3
Entr. Entr. Entr. Entr. exit
-25 26 Dip. -25 27 Dip. -25 28 Dip. -25 30 Dip. -25 0 Q3
Entr. Entr. Entr. Entr. exit
-15 26 Dip. -15 27 Dip. -15 28 Dip. -15 30 Dip. -15 25 Q3
Entr. Entr. Entr. Entr. exit
-5 26 Dip. -5 27 Dip. -5 28 Dip. -5 30 Dip. -5 32 Dip.
Entr. Entr. Entr. Entr. Entr.
5 26 Dip. 5 27 Dip. 5 29 Dip. 5 30 Dip. 5 32 Dip.
Entr. Entr. Entr. Entr. Entr.
15 16 Q3 15 27 Dip. 15 29 Dip. 15 30 Dip. 15 32 Dip.
exit Entr. Entr. Entr. Entr.
25 0 Q3 25 28 Dip. 25 29 Dip. 25 31 Dip. 25 33 Q1
exit Entr. Entr. Entr.
35 0 Q3 35 28 Dip. 35 30 Dip. 35 31 Q1 35 31 Q1
exit Entr. Entr.
45 0 Q3 45 28 Q1 45 28 Q1 45 28 Q1 45 28 Q1
entr.
55 0 Dip. 55 23 Q1 55 23 Q1 55 23 Q1 55 24 Q1
Entr.
65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip. 65 17 Q1
Entr. Entr. Entr. Entr.
The following plots are similar to those above except that in each plot the effect of varying y0 (transverse target position) is demonstrated. In the tables following the plots the values of the maximum and minimum phi (f) for each value of theta (q) along with a defining aperture are tabulated.
Delta 4.5%
y0 0 mm 10 mm 20 mm 30 mm 40 mm
q f limit q f limit q f limit q f limit q f limit
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Q2D
Entr. Entr. Entr. Entr. drift
-55 0 Dip. -55 0 Dip. -55 0 Dip. -55 -1 Dip. -55 -5 Dip.
Entr. Entr. Entr. Entr. Entr.
-45 -26 Dip. -45 -25 Dip. -45 -23 Dip. -45 -22 Dip. -45 -20 Dip.
Entr. Entr. Entr. Entr. Entr.
-35 -26 Dip. -35 -25 Dip. -35 -23 Dip. -35 -22 Dip. -35 -20 Dip.
Entr. Entr. Entr. Entr. Entr.
-25 -26 Dip. -25 -25 Dip. -25 -24 Dip. -25 -22 Dip. -25 -21 Dip.
Entr. Entr. Entr. Entr. Entr.
-15 -26 Dip. -15 -26 Dip. -15 -24 Dip. -15 -23 Dip. -15 -21 Dip.
Entr. Entr. Entr. Entr. Entr.
-5 -26 Dip. -5 -27 Dip. -5 -25 Dip. -5 -23 Dip. -5 -21 Dip.
Entr. Entr. Entr. Entr. Entr.
5 -26 Dip. 5 -28 Dip. 5 -26 Dip. 5 -24 Dip. 5 -18 Q3
Entr. Entr. Entr. Entr. exit
15 -16 Q3 15 -4 Q3 15 0 Q3 15 0 Q3 15 0 Q3
exit exit exit exit exit
25 0 Q3 25 0 Q3 25 0 Q3 25 0 Q3 25 0 Q3
exit exit exit exit exit
35 0 Q3 35 0 Q3 35 0 Q3 35 0 Q3 35 0 Q3
exit exit exit exit exit
45 0 Q3 45 0 Q3 45 0 Q3 45 0 Q3 45 0 Q3
entr. entr. entr. entr. entr.
55 0 Dip. 55 0 Dip. 55 0 Dip. 55 0 Dip. 55 0 Dip.
Entr. Entr. Entr. Entr. Entr.
65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Q2D
Entr. Entr. Entr. Entr. drift
65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Q2D
Entr. Entr. Entr. Entr. drift
55 0 Dip. 55 0 Dip. 55 0 Dip. 55 0 Dip. 55 0 Dip.
Entr. Entr. Entr. Entr. Entr.
45 0 Q3 45 0 Q3 45 0 Q3 45 0 Q3 45 0 Q3
entr. entr. entr. entr. entr.
35 0 Q3 35 0 Q3 35 0 Q3 35 0 Q3 35 0 Q3
exit exit exit exit exit
25 0 Q3 25 0 Q3 25 0 Q3 25 0 Q3 25 0 Q3
exit exit exit exit exit
15 16 Q3 15 25 Dip. 15 23 Dip. 15 21 Dip. 15 19 Dip.
exit Entr. Entr. Entr. Entr.
5 26 Dip. 5 24 Dip. 5 23 Dip. 5 21 Dip. 5 19 Dip.
Entr. Entr. Entr. Entr. Entr.
-5 26 Dip. -5 24 Dip. -5 22 Dip. -5 21 Dip. -5 19 Dip.
Entr. Entr. Entr. Entr. Entr.
-15 26 Dip. -15 24 Dip. -15 22 Dip. -15 21 Dip. -15 19 Dip.
Entr. Entr. Entr. Entr. Entr.
-25 26 Dip. -25 24 Dip. -25 22 Dip. -25 21 Dip. -25 18 Q1Q2
Entr. Entr. Entr. Entr.
-35 26 Dip. -35 24 Dip. -35 23 Dip. -35 20 Q1Q2 -35 16 Q1Q2
Entr. Entr. Entr.
-45 26 Dip. -45 24 Q1Q2 -45 20 Q1Q2 -45 17 Q1Q2 -45 13 Q1Q2
Entr.
-55 0 Dip. -55 0 Dip. -55 15 Q1Q2 -55 12 Q1Q2 -55 8 Q1Q2
Entr. Entr.
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Q2D
Entr. Entr. Entr. Entr. drift
Delta: 2.25%
y0 0 mm 10 mm 20 mm 30 mm 40 mm
q f limit q f limit q f limit q f limit q f limit
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
-55 23 Q1Q2 -55 19 Q1Q2 -55 16 Q1Q2 -55 12 Q1Q2 -55 8 Q1Q2
-45 27 Dip. -45 24 Q1Q2 -45 20 Q1Q2 -45 17 Q1Q2 -45 13 Q1Q2
Entr.
-35 27 Dip. -35 25 Dip. -35 23 Q1Q2 -35 20 Q1Q2 -35 16 Q1Q2
Entr. Entr.
-25 27 Dip. -25 25 Dip. -25 24 Dip. -25 22 Q1Q2 -25 18 Q1Q2
Entr. Entr. Entr.
-15 27 Dip. -15 25 Dip. -15 24 Dip. -15 22 Dip. -15 20 Q1Q2
Entr. Entr. Entr. Entr.
-5 27 Dip. -5 25 Dip. -5 24 Dip. -5 22 Dip. -5 20 Q1Q2
Entr. Entr. Entr. Entr.
5 27 Dip. 5 26 Dip. 5 24 Dip. 5 22 Dip. 5 20 Q1Q2
Entr. Entr. Entr. Entr.
15 27 Dip. 15 26 Dip. 15 24 Dip. 15 22 Dip. 15 20 Q1Q2
Entr. Entr. Entr. Entr.
25 28 Dip. 25 26 Dip. 25 24 Dip. 25 22 Q1Q2 25 18 Q1Q2
Entr. Entr. Entr.
35 28 Dip. 35 26 Dip. 35 23 Q1Q2 35 20 Q1Q2 35 16 Q1Q2
Entr. Entr.
45 28 Q1Q2 45 24 Q1Q2 45 20 Q1Q2 45 17 Q1Q2 45 13 Q1Q2
55 23 Q1Q2 55 19 Q1Q2 55 16 Q1Q2 55 12 Q1Q2 55 8 Q1Q2
65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
55 -23 Q1Q2 55 -27 Q1Q2 55 -30 Q1Q2 55 -2 Q3 55 0 Q3
entr. entr.
45 -28 Q1Q2 45 -30 Dip. 45 -32 Dip. 45 -34 Dip. 45 -32 Dip.
Entr. Entr. Entr. Entr.
35 -28 Dip. 35 -30 Dip. 35 -31 Dip. 35 -33 Dip. 35 -28 Dip.
Entr. Entr. Entr. Entr. Entr.
25 -28 Dip. 25 -29 Dip. 25 -31 Dip. 25 -31 Dip. 25 -26 Dip.
Entr. Entr. Entr. Entr. Entr.
15 -27 Dip. 15 -29 Dip. 15 -31 Dip. 15 -29 Dip. 15 -25 Dip.
Entr. Entr. Entr. Entr. Entr.
5 -27 Dip. 5 -29 Dip. 5 -30 Dip. 5 -27 Dip. 5 -24 Dip.
Entr. Entr. Entr. Entr. Entr.
-5 -27 Dip. -5 -29 Dip. -5 -29 Dip. -5 -26 Dip. -5 -23 Dip.
Entr. Entr. Entr. Entr. Entr.
-15 -27 Dip. -15 -29 Dip. -15 -28 Dip. -15 -25 Dip. -15 -23 Dip.
Entr. Entr. Entr. Entr. Entr.
-25 -27 Dip. -25 -28 Dip. -25 -27 Dip. -25 -25 Dip. -25 -22 Dip.
Entr. Entr. Entr. Entr. Entr.
-35 -27 Dip. -35 -28 Dip. -35 -27 Dip. -35 -24 Dip. -35 -22 Dip.
Entr. Entr. Entr. Entr. Entr.
-45 -27 Dip. -45 -29 Dip. -45 -26 Dip. -45 -24 Dip. -45 -22 Dip.
Entr. Entr. Entr. Entr. Entr.
-55 -23 Q1Q2 -55 -27 Q1Q2 -55 -27 Dip. -55 -24 Dip. -55 -21 DQ3
Entr. Entr.
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
Delta: 0%
y0 0 mm 10 mm 20 mm 30 mm 40 mm
q f limit q f limit q f limit q f limit q f limit
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
-55 -23 Q1Q2 -55 -27 Q1Q2 -55 -31 Q1Q2 -55 -28 Dip. -55 -24 Dip.
Entr. Entr.
-45 -28 Q1Q2 -45 -30 Dip. -45 -32 Dip. -45 -28 Dip. -45 -24 Dip.
Entr. Entr. Entr. Entr.
-35 -29 Dip. -35 -30 Dip. -35 -31 Dip. -35 -28 Dip. -35 -25 Dip.
Entr. Entr. Entr. Entr. Entr.
-25 -28 Dip. -25 -30 Dip. -25 -31 Dip. -25 -29 Dip. -25 -25 Dip.
Entr. Entr. Entr. Entr. Entr.
-15 -28 Dip. -15 -30 Dip. -15 -31 Dip. -15 -29 Dip. -15 -26 Dip.
Entr. Entr. Entr. Entr. Entr.
-5 -28 Dip. -5 -30 Dip. -5 -32 Dip. -5 -31 Dip. -5 -27 Dip.
Entr. Entr. Entr. Entr. Entr.
5 -29 Dip. 5 -30 Dip. 5 -32 Dip. 5 -32 Dip. 5 -28 Dip.
Entr. Entr. Entr. Entr. Entr.
15 -29 Dip. 15 -30 Dip. 15 -32 Dip. 15 -34 Dip. 15 -29 Dip.
Entr. Entr. Entr. Entr. Entr.
25 -29 Dip. 25 -31 Dip. 25 -32 Dip. 25 -34 Dip. 25 -32 Dip.
Entr. Entr. Entr. Entr. Entr.
35 -29 Dip. 35 -31 Dip. 35 -33 Dip. 35 -34 Dip. 35 -36 Dip.
Entr. Entr. Entr. Entr. Entr.
45 -28 Q1Q2 45 -31 Q1Q2 45 -33 Dip. 45 -35 Dip. 45 -36 Dip.
Entr. Entr. Entr.
55 -23 Q1Q2 55 -27 Q1Q2 55 -31 Q1Q2 55 -34 Q1Q2 55 -37 Dip.
Entr.
65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
55 23 Q1Q2 55 19 Q1Q2 55 16 Q1Q2 55 12 Q1Q2 55 8 Q1Q2
45 28 Q1Q2 45 24 Q1Q2 45 20 Q1Q2 45 17 Q1Q2 45 13 Q1Q2
35 29 Dip. 35 27 Q1Q2 35 23 Q1Q2 35 20 Q1Q2 35 16 Q1Q2
Entr.
25 29 Dip. 25 27 Dip. 25 25 Dip. 25 22 Q1Q2 25 18 Q1Q2
Entr. Entr. Entr.
15 29 Dip. 15 27 Dip. 15 25 Dip. 15 23 Q1Q2 15 19 Q1Q2
Entr. Entr. Entr.
5 29 Dip. 5 27 Dip. 5 25 Dip. 5 23 Dip. 5 20 Q1Q2
Entr. Entr. Entr. Entr.
-5 28 Dip. -5 27 Dip. -5 25 Dip. -5 23 Dip. -5 20 Q1Q2
Entr. Entr. Entr. Entr.
-15 28 Dip. -15 27 Dip. -15 25 Dip. -15 23 Q1Q2 -15 19 Q1Q2
Entr. Entr. Entr.
-25 28 Dip. -25 27 Dip. -25 25 Dip. -25 22 Q1Q2 -25 18 Q1Q2
Entr. Entr. Entr.
-35 29 Dip. -35 27 Q1Q2 -35 23 Q1Q2 -35 20 Q1Q2 -35 16 Q1Q2
Entr.
-45 28 Q1Q2 -45 24 Q1Q2 -45 20 Q1Q2 -45 17 Q1Q2 -45 13 Q1Q2
-55 23 Q1Q2 -55 19 Q1Q2 -55 16 Q1Q2 -55 12 Q1Q2 -55 8 Q1Q2
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
Delta: -2.25%
y0 0 mm 10 mm 20 mm 30 mm 40 mm
q f limit q f limit q f limit q f limit q f limit
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
-55 23 Q1Q2 -55 20 Q1Q2 -55 16 Q1Q2 -55 12 Q1Q2 -55 8 Q1Q2
-45 28 Q1Q2 -45 24 Q1Q2 -45 20 Q1Q2 -45 16 Q1Q2 -45 13 Q1Q2
-35 30 Dip. -35 27 Q1Q2 -35 23 Q1Q2 -35 19 Q1Q2 -35 16 Q1Q2
Entr.
-25 30 Dip. -25 28 Dip. -25 25 Q1Q2 -25 22 Q1Q2 -25 18 Q1Q2
Entr. Entr.
-15 30 Dip. -15 28 Dip. -15 26 Dip. -15 23 Q1Q2 -15 19 Q1Q2
Entr. Entr. Entr.
-5 30 Dip. -5 28 Dip. -5 26 Dip. -5 24 Q1Q2 -5 20 Q1Q2
Entr. Entr. Entr.
5 30 Dip. 5 28 Dip. 5 26 Dip. 5 24 Q1Q2 5 20 Q1Q2
Entr. Entr. Entr.
15 30 Dip. 15 28 Dip. 15 26 Dip. 15 23 Q1Q2 15 19 Q1Q2
Entr. Entr. Entr.
25 30 Dip. 25 28 Dip. 25 25 Q1Q2 25 22 Q1Q2 25 18 Q1Q2
Entr. Entr.
35 30 Dip. 35 27 Q1Q2 35 23 Q1Q2 35 19 Q1Q2 35 16 Q1Q2
Entr.
45 28 Q1Q2 45 24 Q1Q2 45 20 Q1Q2 45 16 Q1Q2 45 13 Q1Q2
55 23 Q1Q2 55 20 Q1Q2 55 16 Q1Q2 55 12 Q1Q2 55 8 Q1Q2
65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip. 65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
55 -23 Q1Q2 55 -27 Q1Q2 55 -31 Q1Q2 55 -35 Q1Q2 55 -38 Q1Q2
45 -28 Q1Q2 45 -31 Q1Q2 45 -35 Q1Q2 45 -36 Dip. 45 -38 Dip.
Entr. Entr.
35 -30 Dip. 35 -33 Dip. 35 -34 Dip. 35 -36 Dip. 35 -37 Dip.
Entr. Entr. Entr. Entr. Entr.
25 -30 Dip. 25 -32 Dip. 25 -34 Dip. 25 -35 Dip. 25 -37 Dip.
Entr. Entr. Entr. Entr. Entr.
15 -30 Dip. 15 -32 Dip. 15 -34 Dip. 15 -35 Dip. 15 -37 Dip.
Entr. Entr. Entr. Entr. Entr.
5 -30 Dip. 5 -32 Dip. 5 -33 Dip. 5 -35 Dip. 5 -35 Dip.
Entr. Entr. Entr. Entr. Entr.
-5 -30 Dip. -5 -32 Dip. -5 -33 Dip. -5 -35 Dip. -5 -32 Dip.
Entr. Entr. Entr. Entr. Entr.
-15 -30 Dip. -15 -32 Dip. -15 -33 Dip. -15 -35 Dip. -15 -31 Dip.
Entr. Entr. Entr. Entr. Entr.
-25 -30 Dip. -25 -32 Dip. -25 -33 Dip. -25 -34 Dip. -25 -30 Dip.
Entr. Entr. Entr. Entr. Entr.
-35 -30 Dip. -35 -32 Dip. -35 -33 Dip. -35 -35 Dip. -35 -29 Dip.
Entr. Entr. Entr. Entr. Entr.
-45 -28 Q1Q2 -45 -31 Q1Q2 -45 -33 Dip. -45 -35 Dip. -45 -28 Dip.
Entr. Entr. Entr.
-55 -23 Q1Q2 -55 -27 Q1Q2 -55 -31 Q1Q2 -55 -35 Q1Q2 -55 -28 Dip.
Entr.
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
Delta: -4.50%
y0 0 mm 10 mm 20 mm 30 mm 40 mm
q f limit q f limit q f limit q f limit q f limit
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
-55 0 Q3 -55 0 Q3 -55 0 Q3 -55 0 Q3 -55 0 Q3
exit exit exit exit exit
-45 0 Q3 -45 0 Q3 -45 0 Q3 -45 0 Q3 -45 0 Q3
exit exit exit exit exit
-35 0 Q3 -35 0 Q3 -35 0 Q3 -35 0 Q3 -35 0 Q3
exit exit exit exit exit
-25 0 Q3 -25 0 Q3 -25 0 Q3 -25 0 Q3 -25 0 Q3
exit exit exit exit exit
-15 25 Q3 -15 19 Q3 -15 5 Q3 -15 0 Q3 -15 0 Q3
exit exit exit exit exit
-5 31 Dip. -5 29 Dip. -5 27 Q1Q2 -5 15 Q3 -5 0 Q3
Entr. Entr. exit exit
5 31 Dip. 5 29 Dip. 5 27 Q1Q2 5 23 Q1Q2 5 13 Q3
Entr. Entr. exit
15 31 Dip. 15 29 Dip. 15 26 Q1Q2 15 23 Q1Q2 15 18 Q3
Entr. Entr. exit
25 32 Dip. 25 29 Q1Q2 25 25 Q1Q2 25 21 Q1Q2 25 18 Q1Q2
Entr.
35 31 Q1Q2 35 27 Q1Q2 35 23 Q1Q2 35 19 Q1Q2 35 16 Q1Q2
45 28 Q1Q2 45 24 Q1Q2 45 20 Q1Q2 45 16 Q1Q2 45 13 Q1Q2
55 24 Q1Q2 55 20 Q1Q2 55 16 Q1Q2 55 12 Q1Q2 55 9 Q1Q2
65 17 Q1Q2 65 14 Q1Q2 65 10 Q1Q2 65 6 Q1Q2 65 2 Q1Q2
65 -17 Q1Q2 65 -21 Q1Q2 65 -25 Q1Q2 65 -28 Q1Q2 65 -32 Q1Q2
55 -24 Q1Q2 55 -27 Q1Q2 55 -31 Q1Q2 55 -35 Q1Q2 55 -39 Q1Q2
45 -28 Q1Q2 45 -31 Q1Q2 45 -35 Q1Q2 45 -38 Dip. 45 -40 Dip.
Entr. Entr.
35 -31 Q1Q2 35 -34 Q1Q2 35 -36 Dip. 35 -38 Dip. 35 -39 Dip.
Entr. Entr. Entr.
25 -32 Dip. 25 -34 Dip. 25 -36 Dip. 25 -37 Dip. 25 -39 Dip.
Entr. Entr. Entr. Entr. Entr.
15 -31 Dip. 15 -33 Dip. 15 -35 Dip. 15 -37 Dip. 15 -38 Dip.
Entr. Entr. Entr. Entr. Entr.
5 -31 Dip. 5 -33 Dip. 5 -35 Dip. 5 -37 Dip. 5 -38 Dip.
Entr. Entr. Entr. Entr. Entr.
-5 -31 Dip. -5 -33 Dip. -5 -35 Dip. -5 -35 Q3 -5 0 Q3
Entr. Entr. Entr. exit exit
-15 -25 Q3 -15 -23 Q3 -15 -12 Q3 -15 0 Q3 -15 0 Q3
exit exit exit exit exit
-25 0 Q3 -25 0 Q3 -25 0 Q3 -25 0 Q3 -25 0 Q3
exit exit exit exit exit
-35 0 Q3 -35 0 Q3 -35 0 Q3 -35 0 Q3 -35 0 Q3
exit exit exit exit exit
-45 0 Q3 -45 0 Q3 -45 0 Q3 -45 0 Q3 -45 0 Q3
exit exit exit exit exit
-55 0 Q3 -55 0 Q3 -55 0 Q3 -55 0 Q3 -55 0 Q3
exit exit exit exit exit
-65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip. -65 0 Dip.
Entr. Entr. Entr. Entr. Entr.
To see results for Extended extended targets
Please send comments or questions to John LeRose: lerose@jlab.org