...value

Once the calibration described in the overview section is done, one can get the wanted thickness.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

...required

particularly, a new calibration has to be done after the substitution of the complete target castle, if the vertical alignement values are changed

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

...position

the reference position must be detected once when installing the target and when checking the alignments of the reference points with the metric rulers on the top of the scattering chamber; in this case, we considered reference position the waterfall target position, with zero degrees angle; changing the target block, a new reference point must be detected

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

...(up/down)

One single encoder step error means an offset error of about 0.04 degrees, or 0.006 mm.

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.

...pump;

the scale is in %

.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.