Modifying the settings and single module control

In many cases the user may need to deal with one module at a time. For example if the Verify All caught a problem, the user is advised to first try and download the settings to just that one module. Or perhaps the user wishes to modify the settings.

By clicking on a button in the upper part of the main XTrigMang window, a second orginizational window will be opened, for example the button will open a window with buttons for every module in the electron arm.

  

Figure: The Electron_Arm window list all the modules in the Electron Arm part of the trigger. The arrangement of the buttons indicates the flow of information. For example s12e_l_disc is the input for s12e_l_delay. s12e_l_delay and s12e_r_delay are the inputs for s12e_logic.

By clicking on an individual module, one can gain control of that particular module. There are four different type of windows for the four different types of modules, as shown below. For each module, the user can the data-base in memory, or edit the data-base, what is in the crate, that crate and data-base are the same and the data-base settings into the modules.

  

Figure: The Discriminator window

  

Figure: The Delay Window

  

Figure: The Logic Window

  

Figure: The MLU window

If you modify the data-base be sure to click on the button on the main window!