Next: 5.2.1.6 Safety procedures
Previous: 5.2.1.2 Overview
All magnets (dipoles, quadrupoles, sextupoles, beam correctors) and beam
diagnostic devices (BPMs, scanners, Beam Loss Monitor, viewers) necessary for
the transport of the beam are controlled by Machine Control Center (MCC)
through EPICS, except for special elements which are addressed in the
subsequent sections. The detailed safety operational procedures for the Hall
A beamline should be essentially the same as the one for the CEBAF machine
and beamline. The Hall A staff liason with the MCC is:
-
- A. Saha -x7605
-
- J.P. Chen -x7413
-
- H. Areti -x7187
10/13/1997