Care must be taken in case any removal or disassembly of the radiator system is needed. Disconnecting the stepper motor from the motor driver while power is on can damage the motor, motor driver, and VME44 board.
The Cu targets will certainly be activated in the course of an experiment. Therefore, only remove the Cu target, the target ladder, and/or the whole radiator system in the presence of a Radcon officer.
Ron Gilman should be informed in case of any problems with the radiator. Except for normal operations of the radiator, any work on the system hardware requires that RadCon has concurred in the work and either Ron Gilman or David Meekins is present.