The beam energy is 1.197 (Acc), one linac is 0.5668(Acc), N/S=0.567, inj=0.0638 (MCC). Injector angle is 16.0o, the 1/2 wave plate was OUT(??).
The laser phase was at ?o (not read out).
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9509-9510 | 90.2 | - | 0.50uA | - | - | thr=70mV, raster OFF |
9497-9506 | 23.5 | 82.70+/-0.40 | 19.5 | 80.80+/-0.40 | 1.9 | |
9511-9518 | 163.5 | 78.40+/-0.40 | 165.0 | 77.80+/-0.40 | 2.6 | |
Average | - | 80.50+/-0.30 | - | 79.30+/-0.30 | - | Av: 79.90+/-0.30 Dead time not included |
9519 | 163.5 | - | 0.50uA | - | - | thr=70mV LED 6.3% dt - 3.1% for 163.o |
The full information is given here .
The final result: Pz=82.4 +/- 0.30(stat) +/- 2.4(syst-prelim) (1/2 wave plate OUT??, 16.0o Wien angle)
(dead time correction of 3.1%)
The beam energy is 5.737 (Acc), one linac is 0.5674(Acc), N/S=0.5674, inj=0.0638 (MCC). Injector angle is 16.5o, the 1/2 wave plate was IN(??).
The laser phase was at ?o (not read out).
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9537-9538 | 90.2 | - | 0.60uA | - | - | thr=140mV, raster OFF |
9529-9536 | 22.5 | 83.20+/-0.30 | 22.6 | 83.30+/-0.30 | 1.6 | |
9539-9546 | 163.5 | 81.30+/-0.30 | 160.9 | 82.50+/-0.30 | 1.1 | |
Average | - | 82.30+/-0.20 | - | 82.90+/-0.30 | - | Av: 82.60+/-0.20 Dead time not included |
9547 | 163.5 | - | 0.60uA | - | - | thr=140mV did not work (DT should be low) |
The full information is given here .
The final result: Pz=82.9 +/- 0.20(stat) +/- 2.4(syst-prelim) (1/2 wave plate IN, 16.0o Wien angle)
(dead time correction not done, assumed to be below 1%)
The beam energy is 5.7307 (EP), one linac is 0.56669(Acc), N/S=0.56669, inj=0.064 (MCC). Injector angle is 2.5o, (start) the 1/2 wave plate was OUT(??).
The laser phase was at ?o (not read out).
Mott: -79.1+/-0.66(stat)+/-0.48(sys) (see ELOG)
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9559-9560 | 90.2 | - | 0.60uA | - | - | thr=140mV, raster ON |
9551-9558 | 23.0 | -80.30+/-0.25 | 22.0 | -79.70+/-0.25 | 1.8 | Wien=2.5o |
9561-9568 | 163.5 | -81.40+/-0.20 | 163.3 | -81.50+/-0.20 | 1.7 | |
Average | - | -80.80+/-0.15 | - | -80.60+/-0.15 | - | Av: 80.70+/-0.15 Dead time not included |
9569-9570 | 163.5 | - | 0.60uA | - | - | thr=140mV did not work: no signal on ApL |
9579-9580 | 90.2 | - | 0.60uA | - | - | thr=140mV, raster ON |
9581-9588 | 23.0 | -83.00+/-0.22 | 22.0 | -82.80+/-0.22 | 3.0 | Wien=22.5o |
9571-9578 | 163.5 | -81.60+/-0.22 | 163.2 | -81.70+/-0.20 | 2.5 | |
Average | - | -82.30+/-0.15 | - | -82.20+/-0.15 | - | Av: 82.30+/-0.15 Dead time not included |
9589-9596 | 23.0 | -82.50+/-0.24 | - | - | raster OFF |
The full information is given here .
The final results:
Pz=80.7 +/- 0.15(stat) +/- 2.4(syst-prelim) (1/2 wave plate OUT, 2.5o Wien angle)
(dead time correction not done, assumed to be below 1%)
Pz=82.3 +/- 0.15(stat) +/- 2.4(syst-prelim) (1/2 wave plate OUT, 22.5o Wien angle)
(dead time correction not done, assumed to be below 1%)
The beam energy is 5.7307 (EP), one linac is 0.56669(Acc), N/S=0.56669, inj=0.064 (MCC). Injector angle is 22.5o, the 1/2 wave plate was IN(??).
The laser phase was at ?o (not read out).
Mott: -79.1+/-0.66(stat)+/-0.48(sys) (see ELOG)
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9606-9607 | 90.0 | - | 0.55uA | - | - | thr=140mV, raster ON |
9598-9605 | 23.0 | 82.43+/-0.25 | 21.7 | 81.66+/-0.25 | 0.6 | |
9608-9615 | 163.5 | 82.78+/-0.21 | 163.3 | 82.87+/-0.21 | 0.8 | |
Average | - | 82.60+/-0.15 | - | 82.26+/-0.15 | - | Av: 82.43+/-0.15 Dead time not included |
9616 | 163.5 | - | 0.55uA | - | - | thr=140mV ApL removed from coincid |
9618 | 163.5 | - | 0.55uA | - | - | LED: ApL not used, dead time=1.0% |
The full information is given here .
The final results:
Pz=82.43 +/- 0.15(stat) +/- 2.4(syst-prelim) (1/2 wave plate IN, 22.5o Wien angle)
(dead time correction not done, assumed to be about 0.5%)
The beam energy is 5.7307 (EP), one linac is 0.56669(Acc), N/S=0.56669, inj=0.064 (MCC). Injector angle is 2.3o, the 1/2 wave plate was OUT.
Injector: one laser is used. The laser phase was at ?o (not read out).
Mott: -79.1+/-0.66(stat)+/-0.48(sys) (see ELOG)
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9628-9629 | 90.0 | - | 0.60uA | - | - | thr=140mV, raster ON |
9620-9627 | 23.0 | -82.82+/-0.25 | 21.8 | -82.10+/-0.25 | 1.7 | |
9630-9637 | 163.5 | -83.52+/-0.22 | 163.1 | -83.70+/-0.21 | 2.1 | |
Average | - | -83.17+/-0.17 | - | -83.03+/-0.17 | - | Av: 83.03+/-0.17 Dead time not included |
9638 | 163.5 | - | 0.55uA | - | - | thr=140mV ApL at +0V |
9639 | 163.5 | - | 0.55uA | - | - | thr=140mV ApL at +100V |
9640 | 163.5 | - | 0.55uA | - | - | thr=140mV ApL at +200V |
The full information is given here .
The final results:
Pz=-83.03 +/- 0.17(stat) +/- 2.4(syst-prelim) (1/2 wave plate OUT, 2.3o Wien angle)
(dead time correction not done, assumed to be about 0.5%)
The beam energy is 5.7307 (EP), one linac is 0.56669(Acc), N/S=0.56669, inj=0.064 (MCC). Injector angle is 2.3o, the 1/2 wave plate was IN.
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9650-9651 | 90.0 | - | 0.55uA | - | - | thr=140mV, raster ON |
9642-9649 | 23.0 | 81.96+/-0.20 | 21.9 | 81.31+/-0.20 | 1.8 | |
9652-9659 | 163.5 | 82.43+/-0.20 | 163.6 | 82.39+/-0.20 | 0.3 | |
Average | - | 82.20+/-0.15 | - | 81.80+/-0.15 | - | Av: 82.00+/-0.15 Dead time not included |
9661 | 163.5 | - | 0.55uA | - | - | LED: DT=1.1% |
The full information is given here .
The final results:
Pz= 82.00 +/- 0.15(stat) +/- 2.4(syst-prelim) (1/2 wave plate IN , 2.3o Wien angle)
(dead time correction not done, assumed to be about 0.5%)
The beam energy is 3.469 (EP), one linac is 0.5675(Acc), N/S=0.5675, inj=0.064 (MCC). Injector angle is 25.5o, the 1/2 wave plate was OUT.
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9703-9704 | 90.0 | - | 0.33uA | - | - | thr=70mV, raster ON |
9688-9696 | 23.5 | -67.20+/-0.20 | 21.4 | -66.20+/-0.20 | 0.8 | |
9697-9702 | 43.0 | -62.90+/-0.40 | 43.2 | -63.10+/-0.40 | 1.3 | |
9705-9710 | 148.0 | -74.80+/-0.30 | 150.5 | -72.90+/-0.30 | 0.5 | |
9711-9718 | 163.5 | -72.60+/-0.20 | 163.2 | -72.70+/-0.20 | 2.4 | |
9719 | 163.5 | - | 0.33uA | - | - | LED: DT=0.3% |
The full information is given here .
The final results was obtained fitting the 4 measurements (see the plot):
Pz=-70.50 +/- 0.15(stat) +/- 2.4(syst-prelim) (1/2 wave plate OUT, 25.5o Wien angle)
(dead time correction assumed to be about 0.3% at 20o)
The beam energy is 4.607 (accel), one linac is 0.5679(Acc), N/S=0.5679, inj=0.064 (MCC). Injector angle is -22.9o, the 1/2 wave plate was IN.
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9723-9726 | 23.0 | -81.30+/-0.25 | - | - | 0.6 | 0.58µA , raster ON |
9737-9738 | 90.0 | - | 0.37µA | - | - | thr=110mV, raster ON |
9727-9732 | 23.0 | -80.40+/-0.25 | 19.3 | -78.40+/-0.25 | 2.5 | 0.37µA |
9733-9736 | 40.0 | -83.10+/-0.40 | 37.6 | -80.30+/-0.40 | 0.8 | |
9739-9742 | 153.0 | -73.30+/-0.30 | 150.5 | -75.00+/-0.30 | 0.2 | |
9743-9748 | 163.5 | -74.40+/-0.20 | 160.0 | -75.90+/-0.20 | 1.6 | |
9749 | 163.5 | - | 0.36uA | - | - | LED: DT=1.2% all |
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9761-9762 | 90.0 | - | 0.37µA | - | - | thr=110mV, raster ON |
9750-9755 | 23.0 | -82.30+/-0.25 | 16.9 | -79.20+/-0.25 | 0.6 | 0.37µA |
9756-9759 | 40.0 | -87.70+/-0.50 | 34.5 | -81.50+/-0.40 | 1.8 | |
9763-9766 | 153.0 | -71.10+/-0.40 | 146.9 | -75.60+/-0.30 | 1.5 | |
9767-9772 | 163.5 | -73.60+/-0.25 | 156.5 | -77.00+/-0.20 | 3.4 | |
9774 | 163.5 | - | 0.36uA | - | - | LED: DT=0.3% no ApL |
The full information is given here .
Old target
The final results was obtained fitting the 4 measurements (see the plot):
Pz=-77.60 ± 0.12(stat) ± 2.4(syst-prelim) (1/2 wave plate IN, -23.o Wien angle)
(dead time correction assumed to be about 0.6% at 20o)
New target
The final results was obtained fitting the 4 measurements (see the plot):
Pz=-78.70 ± 0.13(stat) ± 2.4(syst-prelim) (1/2 wave plate IN, -23.o Wien angle)
(dead time correction assumed to be about 0.5% at 20o)
The spin angle measured is -18.7±1.3o.
The beam energy is 5.734 (accel), one linac is 0.567(Acc), N/S=0.567, inj=0.0638 (MCC). Injector angle is 4.4o, the 1/2 wave plate was IN.
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9786-9787 | 90.0 | - | 0.37uA | - | - | thr=140mV, raster ON |
9780-9785 | 23.0 | 87.36+/-0.20 | 21.4 | 86.37+/-0.20 | 2.1 | |
9788-9795 | 163.5 | 81.87+/-0.20 | 158.6 | 84.31+/-0.20 | 1.9 | |
Average | - | 84.60+/-0.15 | - | 85.34+/-0.15 | - | Av: 84.97+/-0.15 Dead time not included |
9796 | 163.5 | - | 0.37uA | - | - | LED: DT=0.5% |
The full information is given here .
The final results:
Pz= 84.97 +/- 0.15(stat) +/- 2.4(syst-prelim) (1/2 wave plate IN , 4.4o Wien angle)
(dead time correction not done, assumed to be about 0.25%)
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9786-9787 | 90.0 | - | 0.37uA | - | - | thr=140mV, raster ON |
9778-9785 | 23.0 | 87.42+/-0.18 | 17.2 | 84.24+/-0.18 | 1.1 | |
9788-9795 | 163.5 | 81.99+/-0.19 | 157.4 | 85.15+/-0.19 | 1.9 | |
Average | - | 84.71+/-0.15 | - | 84.70+/-0.15 | - | Av: 84.70+/-0.15 Dead time not included |
9796 | 163.5 | - | 0.37uA | - | - | LED: DT=0.5% |
The full information is given here .
The final results:
Pz= 84.70 +/- 0.15(stat) +/- 2.4(syst-prelim) (1/2 wave plate IN , 4.4o Wien angle)
(dead time correction not done, assumed to be about 0.25%)
The beam energy is 5.739 (accel), one linac is 0.5675(Acc), N/S=0.5675, inj=0.0638 (MCC). Injector angle is 4.4o, the 1/2 wave plate was OUT.
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9808-9809 | 90.0 | - | 0.34uA | - | - | thr=140mV, raster ON |
9800-9807 | 22.5 | -83.79+/-0.20 | 18.7 | -81.73+/-0.20 | 1.8 | |
9811-9818 | 163.5 | -81.83+/-0.20 | 160.2 | -83.39+/-0.20 | 3.6 | |
Average | - | -82.80+/-0.15 | - | -82.56+/-0.15 | - | Av: 82.70+/-0.15 Dead time not included |
9819 | 163.5 | - | 0.34uA | - | - | LED: DT=0.6% |
9820-9827 | 163.5 | -82.10+/-0.30 | - | - | 1.4 | LG 1,4,5,8 OFF |
9800-9807 | 40.0 | -83.79+/-0.30 | 36.6 | -79.33+/-0.30 | 0.9 |
The full information is given here .
Fitting the measurements at 3 target angles (see the plot)
produce a very large chi2, because of the point at 40o. For the moment, we have no explanation
for this.
The final results:
Pz=-82.70 +/- 0.15(stat) +/- 2.4(syst-prelim) (1/2 wave plate OUT, 4.4o Wien angle)
(dead time correction not done, assumed to be about 0.3%)
The beam energy is 5.739 (accel), one linac is 0.5675(Acc), N/S=0.5675, inj=0.0638 (MCC). Injector angle is 4.9o, the 1/2 wave plate was OUT.
runs | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | |||
9846-9847 | 90.0 | - | 0.32uA | - | - | thr=140mV, raster ON |
9838-9845 | 23.0 | -84.98+/-0.20 | 19.0 | -82.73+/-0.20 | 1.0 | |
9848-9855 | 163.5 | -81.71+/-0.20 | 160.2 | -83.11+/-0.20 | 1.9 | |
Average | - | -83.34+/-0.15 | - | -82.92+/-0.15 | - | Av: -83.13+/-0.15 Dead time not included |
9856 | 163.5 | - | 0.32uA | - | - | LED: DT=0.6% |
9857-9862 | 33.0 | -84.64+/-0.30 | 29.5 | -81.56+/-0.3 | 1.2 | |
9863-9868 | 152.5 | -81.63+/-0.30 | 150.6 | -83.11+/-0.3 | 1.3 | |
9857 | - | - | - | - | - | EPICS BPM values (no other data) |
The full information is given here .
Fitting the measurements at 4 target angles (see the plot).
The final results:
Pz=-83.00 +/- 0.15(stat) +/- 2.4(syst-prelim) (1/2 wave plate OUT, 4.9o Wien angle)
(dead time correction DONE, assumed to be about 0.3%)
Spin dance. The beam energy is 5.739 (accel), one linac is 0.5675(Acc), N/S=0.5675, inj=0.0638 (MCC). Injector angle is 4.9o, the 1/2 wave plate was OUT. Arc energy: 5728.1±1 ep - energy: 5727.0±? Tiefenback: 5727.0±2
Injector: one laser is used in RF mode. Running with Compton.
runs | Wieno | Dial angle | Calculated angle | chi2 | comments | ||
---|---|---|---|---|---|---|---|
angle | Polarization % | angle | Polarization % | ||||
9870 | 10.0 | - | - | - | - | - | EPICS start non-Moller |
9871 | - | - | - | - | - | EPICS beam centered | |
9872 | - | - | - | - | - | EPICS beam centered + Moller quads | |
9873 | - | - | - | - | - | EPICS beam centered + Moller quads + dipole | |
9885-9886 | 10.0 | 90.0 | - | 0.34µA | - | - | thr=120mV, raster ON |
9876-9883 | 23.0 | -84.58±0.19 | 19.4 | -82.54±0.19 | 1.0 | - | |
9888-9894 | 163.5 | -81.18±0.19 | 160.5 | -82.57±0.19 | 1.4 | - | |
Average | - | -82.88±0.14 | - | -82.55±0.14 | - | Av: -82.72±0.14 Dead time not included | |
9896 | 163.5 | - | 0.34µA | - | - | LED: DT=0.6% | |
9898-9899 | 163.5 | -80.65±0.16 | 1.52µA | - | - | - | |
9897 | 163.5 | - | 1.52µA | - | - | LED: DT=2.7% | |
9900-9901 | 163.5 | -81.77±0.17 | 0.82µA | - | - | - | |
9902 | 163.5 | - | 0.83µA | - | - | LED: DT=1.4% | |
9904-9905 | 163.5 | -79.95±0.14 | 1.95µA | - | - | - | |
9903 | 163.5 | - | 1.95µA | - | - | LED: DT=3.5% | |
9885-9886 | 105. | 90.0 | - | 0.29µA | - | - | thr=120mV, raster ON |
9912-9913 | 23.0 | 3.47±0.21 | 19.4 | 3.39±0.21 | 3.0 | - | |
9914-9919 | 163.5 | 12.30±0.20 | 160.6 | 12.50±0.20 | 3.2 | - | |
Average | - | 7.89±0.16 | - | 7.95±0.16 | - | Av: 7.92±0.16 Dead time not included | |
9920 | 163.5 | - | 0.29µA | - | - | LED: DT=0.55% | |
9921 | 90.0 | - | 0.29µA | - | - | BCM calibration | |
9922 | 90.0 | - | 0.15µA | - | - | BCM calibration | |
9923 | 90.0 | - | 0.50µA | - | - | BCM calibration | |
9924 | 90.0 | - | 0.93µA | - | - | BCM calibration | |
9925 | 90.0 | - | 2.00µA | - | - | BCM calibration | |
9926 | 90.0 | - | 3.12µA | - | - | BCM calibration | |
9927 | 90.0 | - | 4.05µA | - | - | BCM calibration, EPICS BPM | |
9936-9937 | 70. | 90.0 | - | 0.30µA | - | - | thr=120mV, raster ON |
9929-9934 | 23.0 | -45.59±0.20 | 19.4 | -44.49±0.20 | 32. | - | |
9938-9943 | 163.5 | -35.21±0.20 | 160.6 | -35.79±0.20 | 2.6 | - | |
Average | - | -40.40±0.16 | - | -40.14±0.16 | - | Av: -40.27±0.16 Dead time not included | |
9935 | 90.0 | - | 04.0µA | - | - | EPICS BPM | |
9950-9951 | 38. | 90.0 | - | 0.30µA | - | - | thr=120mV, raster ON |
9952-9957 | 23.0 | -76.27±0.21 | 19.4 | -74.43±0.21 | 2.6 | - | |
9944-9949 | 163.5 | -68.77±0.21 | 160.6 | -69.91±0.21 | 0.7 | - | |
Average | - | -72.52±0.16 | - | -72.17±0.16 | - | Av: -72.34±0.16 Dead time not included | |
9965-9968 | -60. | 90.0 | - | 0.30µA | - | - | thr=120mV, raster ON |
9959-9964 | 23.0 | -22.57±0.20 | 19.4 | -22.03±0.20 | 1.3 | - | |
9969-9974 | 163.5 | -28.15±0.20 | 160.6 | -28.62±0.20 | 0.4 | - | |
Average | - | -25.36±0.16 | - | -25.32±0.16 | - | Av: -25.34±0.16 Dead time not included | |
9982-9983 | -87. | 90.0 | - | 0.30µA | - | - | thr=120mV, raster ON |
9976-9981 | 23.0 | 14.29±0.20 | 19.4 | 13.95±0.20 | 0.3 | - | |
9984-9989 | 163.5 | 7.44±0.20 | 160.6 | 7.56±0.20 | 2.1 | - | |
Average | - | 10.87±0.16 | - | 10.75±0.16 | - | Av: 10.81±0.16 Dead time not included | |
10002-10003 | -30. | 90.0 | - | 0.30µA | - | - | thr=120mV, raster ON |
9990-9993 | 23.0 | -64.12±0.21 | 19.1 | -62.46±0.21 | 5.1 | - | |
9994-10001 | 33.5 | -62.58±0.22 | 30.35 | -60.47±0.22 | 1.4 | - | |
10005-10012 | 153.0 | -64.57±0.20 | 150.7 | -65.97±0.20 | 1.1 | - | |
10013-10016 | 163.5 | -62.65±0.22 | 160.5 | -63.72±0.22 | 0.35 | - | |
Average | - | -63.38±0.17 | - | -63.39±0.17 | - | Av: -63.24±0.17 Dead time not included | |
10004 | 90.0 | - | 4.0µA | - | - | EPICS BPM | |
10018 | 90.0 | - | 0.29µA | - | - | BCM linearity, normal | |
10019 | 90.0 | - | 0.29µA | - | - | BCM linearity, left arm accid instead of arm R | |
10021 | 90.0 | - | 0.14µA | - | - | BCM linearity, normal | |
10020 | 90.0 | - | 0.14µA | - | - | BCM linearity, left arm accid instead of arm R | |
10022 | 90.0 | - | 0.53µA | - | - | BCM linearity, normal | |
10023 | 90.0 | - | 0.53µA | - | - | BCM linearity, left arm accid instead of arm R | |
10025 | 90.0 | - | 1.00µA | - | - | BCM linearity, normal | |
10024 | 90.0 | - | 1.00µA | - | - | BCM linearity, left arm accid instead of arm R | |
10026 | 90.0 | - | 2.00µA | - | - | BCM linearity, normal | |
10027 | 90.0 | - | 2.00µA | - | - | BCM linearity, left arm accid instead of arm R | |
10029 | 90.0 | - | 3.00µA | - | - | BCM linearity, normal | |
10028 | 90.0 | - | 3.00µA | - | - | BCM linearity, left arm accid instead of arm R | |
10030 | 90.0 | - | 4.00µA | - | - | BCM linearity, normal | |
10031 | 90.0 | - | 4.00µA | - | - | BCM linearity, left arm accid instead of arm R | |
10033 | 90.0 | - | 0.10µA | - | - | BCM linearity, normal | |
10032 | 90.0 | - | 0.10µA | - | - | BCM linearity, left arm accid instead of arm R | |
10035-10040 | 10. | 23.0 | -85.43±0.21 | 0.30µA | - | 1.0 | narrow slit, RF, laser phase 56o |
10041-10046 | 10. | 23.0 | -85.78±0.22 | 0.30µA | - | 0.9 | narrow slit, RF, laser phase 90o |
10047-10052 | 10. | 23.0 | -86.50±0.20 | 0.30µA | - | 1.3 | narrow slit, RF, laser phase 115o |
10053-10058 | 10. | 23.0 | -86.20±0.22 | 0.30µA | - | 1.0 | narrow slit, DC, laser phase 56o |
10060-10065 | 10. | 23.0 | -86.07±0.23 | 0.30µA | - | 0.4 | narrow slit, DC, laser phase 90o |
10066-10071 | 10. | 23.0 | -86.19±0.23 | 0.30µA | - | 0.8 | narrow slit, DC, laser phase 115o |
The full information is given here .
The preliminary results:
P =-82.30±0.15(stat) ± 2.4(syst-prelim) (1/2 wave plate OUT, 10o Wien angle)
(dead time correction DONE, assumed to be about 0.3%, Levchuk effect of 0.5% taken into account)
The dependence of the polarization measured on the Wien filter angle is shown on a plot.