http://www.jlab.org/~adaq/halog/html/0605_archive/060510072442.html
User name E.Chudakov
Log entry time 07:24:42 on May10,2006
Entry number 173579
keyword=Moller/calorimeter tests
We asked MCC to setup for Moller running at 00:30.
At about 1:15 the beam was sent, but the position
was finally adjusted only at 1:50.
We finished the minimal Moller program by 5:45 and tried
to run the calorimeter tests for the rest 1h. The latter failed, because of some electronics or DAQ problem. It was too late for
control access, and we continued running Moller tests
instead.
Summary:
1) The Moller test was successful (~5h)
The beam polarization was about 85%
2) The calorimeter test failed. We will try to find out
the reason during the access today.
http://www.jlab.org/~adaq/halog/html/0602_archive/060228180308.html
Log entry time 18:03:08 on February28,2006
Entry number 164522
keyword=Moller results
Moller measurements 14:00-17:45
a) it turned out that the MOller dipole had been turned ON before
we started. The dipole should be normally turned off.
b) setting up the quads and FSD took quite a lot of time
Energy=1.52 GeV
Wien angle= -5o - should be close to optimum
Results:
target 5 (SM) P=-88.8±0.2(stat)
target 3 (Fe) P=-86.8±0.2(stat)
The sign is explained here
http://www.jlab.org/~adaq/halog/html/0603_archive/060325213722.html
User name E.Chudakov
Log entry time 21:37:22 on March 25, 2006
Entry number 168359
keyword=Moller results
Preliminary result: target 5 : -82.2+/-0.3+/-3(syst) % This results can be compared with -86.5% measured on March 10. The Wien angle seems to be close to optimum (Hall A polarization should be about 0.98 of the full value).
We also measured other targets, the results will be posted later, however they are also closer to 80% than to 90%.
User name A. Puckett
Log entry time 21:52:37 on March14,2006
Entry number 166667
keyword=Hall B Moller measurements
before going back to production running Hall B wants to do Moller measurements. They will alert us when they are ready to go.
http://www.jlab.org/~adaq/halog/html/0603_archive/060309201517.html
User name E.Chudakov
Log entry time 20:15:17 on March 9,2006
Entry number 166008
keyword=Moller results
Wien filter = 76.4 deg should provide a polarization of about 0.953
of the max. value.
Target 5: -86.5±0.15(stat)% (the conditions similar
to the previous measurements)
Other targets have been scanned, the results will be posted later.
http://www.jlab.org/~adaq/halog/html/0603_archive/060304224252.html
User name E.Chudakov
Log entry time 22:42:52 on March 4,2006
Entry number 165215
keyword=Moller results
The measured beam polarization is:
Target 5: +88.2±0.14(stat)%
We also made a scan with target 4. The results will
be posted later.