! this is bodos database for bpm and raster stuff, could be done much nicer
! do not change the ordering, without proper knowledge
! do not add comments between the [identifier] and the necessary lines
! comments are only allowed after one block finishes and before the next
! block starts with its [identifier]
[BPMA_detmap]
               1      2          1            23          16 19       1881
	      -1       0         0            0           0 0       0
[BPMB_detmap]
               1      2          1            23          20 23       1881
	      -1       0         0            0           0 0       0
[Raster_detmap]
               1      2          1            23          25 25      1881
               1      2          1            23          24 24      1881
               1      2          1            23          26 27      1881
	      -1       0         0            0           0 0       0
! lines for the raster, z-pos, freq x and y, pedestal for derivative
!
! Rastered beam
! z-pos for first bpm
! z-pos for second bpm
! z-pos for reference point (should be zero = target)
! last three lines are offx/y,amplx/y,slopex/y for bpma,bpmb,target
! those last three lines are very time dependent, the need to be 
! adjusted for each run, eventually even more often
[Raster]
-23.0 18.3 18.3   0 0 1633   1643
-7.345
-2.214
0.0
0.0190751 -0.022514 -2.12164e-06 3.15273e-06 0. 0.
0.00639588 -0.0109012 -3.45605e-06 5.03628e-06 0. 0.
0.00207144 -0.00754382 -4.43062e-06 6.51425e-06 0. 0.
--------[ 2011-02-12 23:20:00 ]
-0.006398 0.008741 1.692110e-06 -3.601067e-06 0. 0.
-0.009902 0.014289 1.486758e-06 -4.062264e-06 0. 0.
-0.012602 0.018957 1.812652e-06 -5.177874e-06 0. 0.
!-0.00475791 -0.00278243 1.63825e-06 1.83396e-06 0. 0.
!-0.00186778 -0.00286444 2.23071e-06 2.14824e-06 0. 0.
!-0.000647539 -0.0029319 2.50367e-06 2.30482e-06 0. 0.
--------[ 2011-02-28 05:40:40 ]
-0.011094 0.009731 2.938577e-06 -3.934515e-06 0. 0.
-0.014133 0.014510 3.524974e-06 -4.795683e-06 0. 0.
-0.015511 0.016665 3.800902e-06 -5.204895e-06 0. 0.
! bpma lines
! z-pos, calib-const,phase-difference to raster
! 4 pedestals
! linear trafo (2*2 matrix and offset vector)
[BPMA]
-7.345 0.01887  1.1 1.1
614.13   542.49   392.30   405.86 
0.668830	 -0.684601	 0.672076	 0.683270	 0.000146	 -0.000638
! ditto for bpmb
[BPMB]
-2.214 0.01887 1.1 1.1
523.85   490.33   493.20   544.81
0.655573	 -0.798151	 0.652407	 0.803067	 0.004601	 -0.005715
! this is the end ...
! not of the world, but of this file
! Have fun and dont be distracted by the nice weather outside