! this is bodos database for bpm and raster stuff, could be done much nicer
! do not change the ordering, without proper knowledge
! do not add comments between the [identifier] and the necessary lines
! comments are only allowed after one block finishes and before the next
! block starts with its [identifier]
[BPMA_detmap]
               1      4          1            21         16 19       1881
	      -1       0         0            0           0 0       0
[BPMB_detmap]
               1      4          1            21         20 23      1881
	      -1       0         0            0           0 0       0
[Raster_detmap]
               1      4          1            21         25 25      1881
               1      4          1            21         24 24      1881
               1      4          1            21         26 27      1881
	      -1       0         0            0           0 0       0
! lines for the raster, z-pos, freq x and y, pedestal for derivative
!
! Rastered beam
! z-pos for first bpm
! z-pos for second bpm
! z-pos for reference point (should be zero = target)
! last three lines are offx/y,amplx/y,slopex/y for bpma,bpmb,target
! those last three lines are very time dependent, the need to be 
! adjusted for each run, eventually even more often
[Raster]
-23.0 18.3 18.3   0 0 1633   1643
-7.345
-2.214
0.0
-0.000731408 0.00580783 8.31355e-07 -8.42894e-07 0. 0.
-0.00361796 0.00696733 1.07313e-06 -9.88531e-07 0. 0.
-0.00515336 0.00788106 1.26168e-06 -1.16556e-06 0. 0.
! bpma lines
! z-pos, calib-const,phase-difference to raster
! 4 pedestals
! linear trafo (2*2 matrix and offset vector)
[BPMA]
-7.345 0.01887  1.1 1.1
 329  27  13  249 
-0.738959 0.759596 0.758844 0.747731 -0.000311576 0.00109736
! ditto for bpmb
[BPMB]
-2.214 0.01887 1.1 1.1
 10  137  36  187 
-0.686875 0.737689 0.735834 0.691631 -0.00100634 0.00228915
! this is the end ...
! not of the world, but of this file
! Have fun and dont be distracted by the nice weather outside