0000 | 0100 | 0200 | 0300 | 0400 | 0500 | 0600 | 0700 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0 | 0 | 0.75 | 1 | 1 | 1 | 1 | 1 | 5.75 |
Beam Available but Not in Use | 0.5 | 0 | 0.25 | 0 | 0 | 0 | 0 | 0 | 0.75 |
Beam Not Available or Unacceptable | 0.5 | 1.0 | 0 | 0 | 0 | 0 | 0 | 0 | 1.5 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 8 |
Planned Config- uration Change | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Unplanned Experiment Down | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: Got beam at 0:30. Worked on the spot size, it is marginal. Harp scan data analysis not working, used SPOT. Then took production data at Q^2 = 5.6. Due to limited target cooling, we could only take 28 uA. Later increased to 33 uA. Optimized Calo ADC gate timing.
Data Entry by: R. Michaels