NEXT
User name a-onl
Log entry time 11:22:21 on August 5, 2001
Entry number 69398
keyword=End_of_Run_21607
****************************
Run Number: 21607
End of Run Comment:
Run_type=other,beam_energy=1196.9,beam_halfwaveplate=out,beam_polarization=82.0,beam_raster=on,comment_text=12C quasielastic, ps=8,daq_mode=both HRS daq,leftarm_p=1123,leftarm_theta=18.6,rightarm_p=1123,rightarm_theta=18.6,target_halfwaveplate=out,target_name=Shapiro,target_polarization=48,target_type=BeO Carbon foils
junk
can't read "epicsfile": no such variable
while executing
"halla_message "halla_scaler_process" "file $epicsfile..."
invoked from within
"if { [file exists $scalerinfo(epics)] } {
set fpid [open $scalerinfo(epics)]
while { ! [ eof $fpid ] } {
gets $fpid temp
set temp [ string trim $temp ] ; # get rid of leading and trailing spaces
if { [ string first ";" $temp ] == 0 } { continue; } ;# skip comments
if { [ string first ps $temp ] == 0 } {
set pslist [ split $temp , ]
foreach i $pslist {
append psfacline "$i "
set psfac [ split $i = ]
regsub ps [lindex $psfac 0 ] " " psind
set psind [string trim $psind ]
set ps($psind) [lindex $psfac 1]
}
break;
}
}
close $fpid
} else {
halla_message "halla_scaler_process" "file $epicsfile does not exist"
}"
(procedure "halla_scaler_process" line 53)
invoked from within
"halla_scaler_process .mid.tex scalerinfo "
****************************
End-of-run EPICS data for Run Number 21607 at Sun Aug 5 11:15:09 EDT 2001
Right Arm D1 momentum : 1.123
Right Arm arm angle : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 18.6001
Left Arm D1 momentum : 1.123
Left Arm arm angle : 18.6033
Tiefenbach Hall A energy :
Right Arm arm mispointing (HPT) : -0
Left Arm arm mispointing (HPT) : -0
Right Arm Q1 power supply current : 844.445
Right Arm Q1 momentum : 1.12303
Right Arm Q1 gauss meter : -0.0211
Right Arm Q1 power supply polarity : 0
Right Arm Q2 power supply current : 483.283
Right Arm Q2 momentum : 1.12296
Right Arm Q2 gauss meter : 0.2541
Right Arm Q2 power supply polarity : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 0
Right Arm D1 power supply current : 383.525
Right Arm D1 momentum : 1.123
Right Arm D1 NMR : 0.416732
Right Arm Q3 power supply current : 446.767
Right Arm Q3 momentum : 1.12279
Right Arm Q3 gauss meter : 0.2002 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Right Arm Q3 power supply polarity : 1
Left Arm Q1 power supply current : 844.69
Left Arm Q1 momentum : 1.12276
Left Arm Q1 gauss meter : -0.0715
Left Arm Q1 power supply polarity : 0
Left Arm Q2 power supply current : 483.443
Left Arm Q2 momentum : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 1.12272
Left Arm Q2 gauss meter : 0.2555
Left Arm Q2 power supply polarity : 1
Left Arm D1 power supply current : 374.682
Left Arm D1 momentum : 1.123 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Left Arm D1 NMR : 0.415746
Left Arm Q3 power supply current :
Left Arm Q3 momentum : 1.12338
Left Arm Q3 gauss meter : -0.2235
Left Arm Q3 power supply polarity : 1
Average current of the two cavities : 0.0200676
Current on Unser monitor : 4.93337
Current on Upstream bcm : CAC: UDP send error = "Connection refused" 0.0199391
Current on Downstream bcm : 0.0204095
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.1
Current on IBC0L02 (source) :
MBSY1c Hall A Beam energy : 1197.93
MBSY1c magnet current (amp) : 49.6474
MBSY1c Bdl : 298944
MBSY3c Hall C Beam energy : 2336.25
Tiefenbach Hall A energy : 1196.87
Tiefenbach Hall C energy : 2330.26
Delta(E)/E width (MV_AI_DXWID) : 0
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Right Arm Arm Collimator : 0.865186
Left Arm Arm Collimator : 0.868799
HacR_HPE1313A:0_Ch58 : -0.525879
HacR_HPE1313A:0_Ch55 : 22.8516
HacR_HPE1313A:0_Ch54 : -0.822754
HacR_alignROLL : -0.29176
HacR_alignPITCH : 0.0619813
HacR_alignHPT : -0
HacL_HPE1313A:0_Ch58 : -0.154297
HacL_HPE1313A:0_Ch55 : 24.5605
HacL_HPE1313A:0_Ch54 : -0.0986328
HacL_alignROLL : 0.0960213
HacL_alignPITCH : 0.135023
HacL_alignHPT : -0
Right Arm Arm Collimator :
Left Arm Arm Collimator : 0.86875
Wien angle : 2.38446
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : 18.827
Wien field : 0.68176
Laser attenuation Hall A : 0
Laser power Hall A : 57
Half-wave plate (off=out) : OFF
Beam Half-wave plate (off=out) : OFF
OTR x-position : -6.7914
OTR y-position : 3.57362
OTR x-width : 0
OTR y-width : -0
OTR data valid flag : No
Polarized 3He Target RTD #1 : 0
Polarized 3He Target RTD #2 : 51.084
Polarized 3He Target RTD #3 : 54.3066
Polarized 3He Target RTD #4 : 43.3496
Polarized 3He Target RTD #5 : 61.0059
Polarized 3He Target RTD #6 : 188.203
Polarized 3He Target RTD #7 : 186.855
Polarized 3He Ref. Cell RTD #8 : 45.0586
Polarized 3He Ref. Cell RTD #9 : -49.8242
Polarized 3He Ref. Cell RTD #10 : -51.875
Polarized 3He Target Ref. Cell Gas Pres. : 1.46776
Polarized 3He Target Ref. Cell Sys.Vac. : 905.111
Polarized 3He Target Cooling Jet : 28.7891
Polarized 3He Target OVEN RTD : 170.1
Polarized 3He Target OVEN SP1 SET : 170
Polarized 3He Target OVEN SP1 : 170
Polarized 3He Target OVEN AL1 SET : 0
Polarized 3He Target OVEN AL1 : 150
Polarized 3He Target OVEN AL1 STATUS : enabled
Polarized 3He Target Half-Wave Plate DIST: 1.2e+06
Polarized 3He Target Half-Wave Plate STAT: 1200000
Polarized 3He Target Position (PA) : 63.4226
Polarized 3He Target Position (POS) : BeO+12C Foils
Polarized 3He Target Position (DA) : 63.4227
Polarized 3He Target Position (SS9) : Axis is OK
Polarized 3He Target Position (SA10) : 0
Polarized 3He Target Position (SA9) : 0
Polarized 3He Laser#1 State : 0
Polarized 3He Laser#1 Current : 38
Polarized 3He Laser#1 Temperature : 13
Polarized 3He Laser#2 State : 0
Polarized 3He Laser#2 Current : 37
Polarized 3He Laser#2 Temperature : 20.7
Polarized 3He Laser#3 State : 0
Polarized 3He Laser#3 Current : 40
Polarized 3He Laser#3 Temperature : 26.2
Polarized 3He Laser#4 State : 0
Polarized 3He Laser#4 Current : 40
Polarized 3He Laser#4 Temperature : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 15
Polarized 3He Laser#5 State : 2
Polarized 3He Laser#5 Current : 36.5
Polarized 3He Laser#5 Temperature : 18
Polarized 3He Laser#6 State : 2
Polarized 3He Laser#6 Current : 40
Polarized 3He Laser#6 Temperature : 11.3
Polarized 3He Laser#7 State : 2
Polarized 3He Laser#7 Current : 0
Polarized 3He Laser#7 Temperature : 0
Polarized 3He Coil Current Longitudinal : -6.971
Polarized 3He Coil Current Transverse : -0.1183
Parity run number: 1741