1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0 | 0 | 0 | 12 | 0 | 0 | 20 | 30 | 1.03333333333333 |
Beam Available but Not in Use | 0 | 0 | 0 | 0 | 10 | 0 | 0 | 0 | 0.166666666666667 |
Beam Not Available or Unacceptable | 1 | 1 | 1 | 48 | 50 | 1 | 40 | 30 | 6.8 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 1 | 1 | 1 | 1 | 0 | 0 | 20 | 1 | 5.33333333333333 |
Planned Config- uration Change | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Unplanned Experiment Down | 0 | 0 | 0 | 0 | 1 | 1 | 40 | 0 | 2.66666666666667 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 10 | 0 | 0 | 0 | 0.166666666666667 |
Comments: 10 minutes spent trying to figure out how to analyze harp scan. Then determined that the beam width was too small. The unplanned experiment down time was due to beam tuning for an acceptable width.
Data Entry by: R Roche