Log entry time 03:14:11 on May 4, 2002

Entry number 2537

keyword=Start_Run_1215,Run_type=elastic,beam_energy=2.260,beam_raster=on,comment_text=Target Luminosity Scan,6msr Coll,4 cm LH2, I=5uA,daq_mode=both HRS daq,leftarm_p=1.920,leftarm_theta=22.166,photonarm_D=hrs,photonarm_angle=-20.43,photonarm_p=-3.145,rightarm_p=1.920,rightarm_theta=22.166,target_name=,target_type=4cm Hydrogen
Beginning-of-run EPICS data for Run Number 1215 at Sat May 4 03:13:51 EDT 2002
; (Integer!) prescale factors for runs. 
; This file is read at start of every run.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; The default factor is essentially infinite. 
; ps8 = 65535 turns off the 1 kHz pulser on T8.
; Keep enough T2 and T4 to measure efficiency
; PS1 for the Right spectrometer based on T1 defined by S1*S2
; PS2 for the Right spectrometer based on T2 defined by S1*S0+S2*S0
; PS3 for the Left spectrometer based on T3 defined by S1*S2
; PS4 for the Left spectrometer redundant trigger T4 S1*S0+S2*S0
; PS5 for coincidence of T1 and T3.
; PS7 irrelevant
; PS8 for pulser 
ps1=6,ps2=800,ps3=6,ps4=50,ps5=1,ps6=65535,ps7=65535,ps8=65535
 
Left Arm Q1 power supply current : 1444.45
Left Arm Q1 momentum : 1.91996
Left Arm Q1 gauss meter : -0.1221
Left Arm Q1 power supply polarity : 0
Left Arm Q2 power supply current : 826.744
Left Arm Q2 momentum : 1.91998
Left Arm Q2 gauss meter : 0.4361
Left Arm Q2 power supply polarity : 1
Left Arm D1 power supply current : 649.943
Left Arm D1 momentum : 1.91999
Left Arm D1 NMR : 0.710482
Left Arm Q3 power supply current : 764.368
Left Arm Q3 momentum : 1.91995
Left Arm Q3 gauss meter : -0.3824
Left Arm Q3 power supply polarity : 1
Right Arm Q1 power supply current : 1443.75
Right Arm Q1 momentum : 1.92005
Right Arm Q1 gauss meter : -0.03588
Right Arm Q1 power supply polarity : 0
Right Arm Q2 power supply current : 826.363
Right Arm Q2 momentum : 1.92013
Right Arm Q2 gauss meter : 0.4343
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 664.945
Right Arm D1 momentum : 1.92
Right Arm D1 NMR : 0.712488
Right Arm Q3 power supply current : 764.067
Right Arm Q3 momentum : 1.92021
Right Arm Q3 gauss meter : 0.3429
Right Arm Q3 power supply polarity : disabled
Left Arm Top VDC Current : -0.390625
Left Arm Bottom VDC Current : 2.00195
Right Arm Top VDC Current :
Right Arm Bottom VDC Current :
Average current of the two cavities : 4.9689
Current on Unser monitor : 9.91631
Current on Upstream bcm : 4.96958
Current on Downstream bcm : 4.96821
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) : 5.00786
Tiefenbach Hall A energy : 2259.86
Tiefenbach Hall C energy : 5564.65
Delta(E)/E width (MV_AI_DXWID) : 16.8501
MBSY1c Hall A Beam energy : 2262.69
MBSY3c Hall C Beam energy : 5582.95
MBSY1c magnet current (amp) : 94.162
MBSY1c Bdl : 564657
Arc1 dp/p : 0.000110923
Arc2 dp/p : -0.00148434
Left Arm Arm Collimator : 0.615527
Left LVDT HPM : -487
Left LVDT VPM : 542
HacL_HPE1313A:0_Ch58 : -0.13623
HacL_HPE1313A:0_Ch55 : 22.5586
HacL_HPE1313A:0_Ch54 : -0.153809
HacL_alignROLL : 0.197
HacL_alignPITCH : -0.121065
HacL_alignHPT : -0
Left Arm Angle Floor Angle : 22.5
Left Arm Angle Vernier : -27
Left Arm Scattering Angle : 22.1654
Right Arm Arm Collimator : 0.612061
Right LVDT HPM : 1002
Right LVDT VPM : 240
HacR_HPE1313A:0_Ch58 : -0.539551
HacR_HPE1313A:0_Ch55 : 21.3867
HacR_HPE1313A:0_Ch54 : -0.853027
HacR_alignROLL : 0.466989
HacR_alignPITCH : -0.489172
HacR_alignHPT : -0
Right Arm Angle Floor Angle : 22
Right Arm Angle Vernier : -5
Right Arm Scattering Angle : 22.1682
IPM1C12.XPOS : 0.269154
IPM1C12.YPOS : -0.0729571
IPM1H04A.XPOS : 0.0843493
IPM1H04A.YPOS : 0.282031
IPM1H04B.XPOS : 0.457272
IPM1H04B.YPOS : 0.000243032
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
Wien angle : -70.2265
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : -1636.3
Wien field : 46.79
Laser attenuation Hall A : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 62
Laser power Hall A : 60
Half-wave plate (off=out) : OUT
Beam Half-wave plate (off=out) : OUT
Target OTR x-position : 3.22055
Target OTR y-position : 0.192898
Target OTR x-width : 0.485832
Target OTR y-width : 0.320845
Target OTR data valid flag : No
Target OTR In/Out : MaxPix is Bad
Arc OTR x-position : 1.09883
Arc OTR y-position : -3.46006
Arc OTR x-width : 2.1693
Arc OTR y-width : 1.8923
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out
Current Setpoint : 0
Current Readback : 0
User name a-onl

Log entry time 03:14:11 on May 4, 2002

Entry number 2537
