Log entry time 22:41:25 on October 19, 2002

Entry number 88427

Beginning-of-run EPICS data for Run Number 2524 at Sat Oct 19 22:27:00 EDT 2002
; (Integer!) prescale factors for each run, downloaded at prestart.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; The default factor is essentially infinite. 
; ps8 = 65535 turns off the 1 kHz pulser on T8.
; Keep enough T2 and T4 to measure efficiency
; PS1 for the Right spectrometer T1 defined by S1.and.S2
; PS2 for the Right spectrometer T2 defined by S0/S1/S2 majority
; PS3 for the Left spectrometer T3 defined by S1.and.S2
; PS4 for the Left spectrometer T4 defined by S0/S1/S2 majority
; PS5 for T5 coincidence trigger.
; PS8 for 1024 Hz pulser (keep this at <= 100)
; Trig 9 = 30 Hz, and you cannot prescale it.
 
ps1=1,ps2=1000,ps3=1,ps4=1000,ps5=1,ps6=65535,ps7=65535,ps8=65535
   
Left Arm Q1 power supply current :
Left Arm Q1 momentum : 2.69031
Left Arm Q1 gauss meter :
Left Arm Q1 power supply polarity :
Left Arm Q2 power supply current : 1158.42
Left Arm Q2 momentum : 2.69024
Left Arm Q2 gauss meter :
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 932.324
Left Arm D1 momentum : 2.69027
Left Arm D1 NMR : 0.995911
Left Arm Q3 power supply current : 1071.05
Left Arm Q3 momentum : 2.69027
Left Arm Q3 gauss meter :
Left Arm Q3 power supply polarity : disabled
Right Arm Q1 power supply current :
Right Arm Q1 momentum : 3.11575
Right Arm Q1 gauss meter : 0.05789
Right Arm Q1 power supply polarity :
Right Arm Q2 power supply current : 1340.98
Right Arm Q2 momentum : 3.11611
Right Arm Q2 gauss meter : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. -0.7043
Right Arm Q2 power supply polarity : disabled
Right Arm D1 power supply current : 1122.63
Right Arm D1 momentum : 3.11569
Right Arm D1 NMR : 1.1562
Right Arm Q3 power supply current : 1239.77
Right Arm Q3 momentum : 3.11571
Right Arm Q3 gauss meter : -0.5555
Right Arm Q3 power supply polarity : enabled
Left Arm Top VDC Current : -1.26953
Left Arm Bottom VDC Current : -2.00195
Right Arm Top VDC Current :
Right Arm Bottom VDC Current :
Average current of the two cavities : 5.36733
Current on Unser monitor : -0.353827
Current on Upstream bcm : 5.36399
Current on Downstream bcm : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 5.28661
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) : 5.32233
Tiefenbach Hall A energy : 5009.01
Tiefenbach Hall C energy : 4018.24
Delta(E)/E width (MV_AI_DXWID) : 2.991
MBSY1c Hall A Beam energy : 5019.53
MBSY3c Hall C Beam energy : 4029.98
MBSY1c magnet current (amp) : 209.525
MBSY1c Bdl : 1.25263e+06
Arc1 dp/p : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 0
Arc2 dp/p : 0
Left Arm Arm Collimator : 0.62002
Left LVDT HPM :
Left LVDT VPM :
HacL_HPE1313A:0_Ch58 : -0.170898
HacL_HPE1313A:0_Ch55 : 24.3652
HacL_HPE1313A:0_Ch54 : -0.260254
HacL_alignROLL :
HacL_alignPITCH :
HacL_alignHPT :
Left Arm Angle Floor Angle :
Left Arm Angle Vernier : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Left Arm Scattering Angle :
Right Arm Arm Collimator : 0.612891
Right LVDT HPM : 5086
Right LVDT VPM : -927
HacR_HPE1313A:0_Ch58 : -0.546875
HacR_HPE1313A:0_Ch55 : 22.998
HacR_HPE1313A:0_Ch54 : -0.775879
HacR_alignROLL : 0.466989
HacR_alignPITCH : -0.489172
HacR_alignHPT : -0
Right Arm Angle Floor Angle : 27.5
Right Arm Angle Vernier : 60.5
Right Arm Scattering Angle : 28.0457
IPM1C12.XPOS : -0.0104216
IPM1C12.YPOS : -0.0388131
IPM1H04A.XPOS : -0.0188451
IPM1H04A.YPOS : -0.0156265
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
Wien angle : -9.49571
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : -220
Wien field : 6.2161
Laser attenuation Hall A : 60
Laser power Hall A : 62
Half-wave plate (off=out) : OUT
Beam Half-wave plate (off=out) : OUT
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : 8 cycles
G0 Helicity Pattern Set : Quartet
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : 8 cycles
G0 Helicity Pattern : Quartet
Target OTR x-position : -0.699422
Target OTR y-position : 0.797596
Target OTR x-width : 0.671966
Target OTR y-width : 0.451438
Target OTR data valid flag : No
Target OTR In/Out : MaxPix is Bad
Arc OTR x-position : -2.06484
Arc OTR y-position : -0.139822
Arc OTR x-width : 2.97153
Arc OTR y-width : 3.0337
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out
fan frequency loop 1 : 59.5
fan frequency loop 2 : 35
fan frequency loop 3 : 0
Encoder position : 771758
temperature loop 1 : 19
temperature loop 1 : 19.19
temperature loop 1 : 92.83
temperature loop 2 : 22
temperature loop 2 : 21.96
temperature loop 2 : 21.98
temperature loop 3 : 94.98
temperature loop 3 : 94.98
temperature loop 3 : 94.98
pressure loop D2 : 22.2553
pressure loop H2 : 23.3997
FPP HV 7.1.0 of chamber 1 : 0
FPP HV 7.1.1.of chamber 1 : 0
FPP HV 7.1.2 of chamber 1 : 0
FPP HV 7.1.3 of chamber 1 : 0
FPP HV 7.1.4 of chamber 1 : 0
FPP HV 7.1.5 of chamber 1 : 0
FPP HV 7.1.8 of chamber 2 : 0
FPP HV 7.1.9.of chamber 2 : 0
FPP HV 7.1.10 of chamber 2 : 0
FPP HV 7.1.11 of chamber 2 : 0
FPP HV 7.1.12 of chamber 2 : 0
FPP HV 7.1.13 of chamber 2 : 0
FPP HV 8.1.0 of chamber 3 : 1775.3
FPP HV 8.1.1.of chamber 3 : 1775.3
FPP HV 8.1.2 of chamber 3 : 1775.3
FPP HV 8.1.3 of chamber 3 : 1775.3
FPP HV 8.1.4 of chamber 3 : 1775.3
FPP HV 8.1.5 of chamber 3 : 1775.3
FPP HV 8.1.8 of chamber 4 : 1773.8
FPP HV 8.1.9.of chamber 4 : 1773.8
FPP HV 8.1.10 of chamber 4 : 1773.8
FPP HV 8.1.11 of chamber 4 : 1773.8
FPP HV 8.1.12 of chamber 4 : 1773.8
FPP HV 8.1.13 of chamber 4 : 1773.8