Log entry time 00:07:26 on August17,2005

Entry number 152222

Swing Shift Summary
----------------------
16:00 - production running

16:15 - called for controlled access in order to reset cavity bpm crate.
      - reset the cavity crate, and Jack got the MAC address so that remote 
reset of the crate will be possible.

16:42 - Ready for beam, asked MCC for 39 uA

16:45 - Start run 4466

During run 4466, I set the cavity monitor parameters to the correct settings 
per Bob's logentry 151839.

We started a Spectrometer DAQ run to see if the cavities are working correctly 
again.

17:40 - rebooted all the Spectrometer DAQ ROCs and TSs and restarted CODA.

17:53 - took another Spect. DAQ run for the cavities

19:18 - beam has been quite stable, so ask MCC to lower current to 38 uA

19:30 - end Compton run, and start new one

19:34 - Profile scan

20:14 - accelerator FFB has a calibration or some kind of fault, and David 
Green is going to take FFB into normal mode and adjust corrector to see if it 
clears - ended run 4470

20:20 - changed PITA voltages to induce ~ +307 ppm charge asymmetry and turned 
feedback off.  Adjusted Hall C IA to make their charge asymmetry small.  Also 
used A IA to tweak our charge asymmetry.

During run 4471, beam was unstable because of thunderstorm, so we asked for 39 
uA.

21:30 - ended Compton run and started a new one

21:47 - asked for 38 uA because there are no beam trips and septum is creeping 
up

Production running the rest of the evening.


SUMMARY OF RUNS
------------------
4465 - production, IHWP IN, 68k
4466 - production, IHWP IN, 100k
4467 - production, IHWP IN, 100k
4468 - production, IHWP IN, 100k
4469 - profile scan, IHWP IN
4470 - production, IHWP IN, 50k
4471 - production, IHWP IN, 100k, large Aq, feedback off - on purpose
4472 - production, IHWP IN, 100k, large Aq, feedback off - on purpose
4473 - production, IHWP IN, 100k, large Aq, feedback off - on purpose
4474 - production, IHWP IN, 100k, large Aq, feedback off - on purpose