| 0000 | 0100 | 0200 | 0300 | 0400 | 0500 | 0600 | 0700 | Total Time | |
|---|---|---|---|---|---|---|---|---|---|
| Acceptable Beam in Use | 0.57 | 0.82 | 0.83 | 0.85 | 0.82 | 0.77 | 0.73 | 0.75 | 6.13 |
| Beam Available but Not in Use | 0.35 | 0.12 | 0.10 | 0.09 | 0.18 | 0.17 | 0.08 | 0.25 | 1.33 |
| Beam Not Available or Unacceptable | 0.08 | 0.07 | 0.08 | 0.07 | 0.00 | 0.07 | 0.18 | 0.00 | 0.55 |
| Accelerator Con- figuration Change | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Experiment Ready | 0.57 | 0.82 | 0.92 | 0.85 | 0.85 | 0.83 | 0.92 | 0.75 | 6.50 |
| Planned Config- uration Change | 0.30 | 0.18 | 0.08 | 0.15 | 0.15 | 0.17 | 0.08 | 0.25 | 1.37 |
| Unplanned Experiment Down | 0.13 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.13 |
| Hall not ready reasons | |||||||||
| Target | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Data Acq | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Other | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HRSL | 0.13 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.13 |
| HRSR | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HALL_OFF | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Comments: 00:00 Change Target to C 00:18 Begin production running 00:59 Change to B4C target 01:39 Change to Li target 02:21 Request target change back to Ta & set HRS-L to 14.0 deg. 03:04 Change to C target. 03:56 change to B4C target 04:31 Change to Li target 05:10 change back to Ta target & kinematics change. 05:50 change to C target. 06:37 change to B4C target 07:13 change to Li target.
Data Entry by: E. Schulte