| 1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
|---|---|---|---|---|---|---|---|---|---|
| Acceptable Beam in Use | 0.68 | 0.80 | 0.72 | 0.83 | 0.80 | 0.67 | 0.20 | 0.80 | 5.51 |
| Beam Available but Not in Use | 0.25 | 0.13 | 0.17 | 0.02 | 0.02 | 0.01 | 0.17 | 0.10 | 0.86 |
| Beam Not Available or Unacceptable | 0.07 | 0.07 | 0.12 | 0.15 | 0.18 | 0.32 | 0.63 | 0.10 | 1.63 |
| Accelerator Con- figuration Change | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Experiment Ready | 0.83 | 0.87 | 0.83 | 1.00 | 1.00 | 1.00 | 0.83 | 0.90 | 7.27 |
| Planned Config- uration Change | 0.00 | 0.13 | 0.17 | 0.00 | 0.00 | 0.00 | 0.17 | 0.10 | 0.57 |
| Unplanned Experiment Down | 0.17 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.17 |
| Hall not ready reasons | |||||||||
| Target | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Data Acq | 0.17 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.17 |
| Other | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HRSL | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HRSR | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HALL_OFF | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Comments: 19:20 Hall C began running 80 uA. Beam became trippy after this point. 21:49-22:30 RF separation work for Hall A. 22:40-22:55 Check beam size and spot on BeO target.
Data Entry by: V. Sulkosky