| 0800 | 0900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | Total Time | |
|---|---|---|---|---|---|---|---|---|---|
| Acceptable Beam in Use | 0.38 | 0.03 | 0.11 | 0.18 | 0.35 | 0.63 | 0.42 | 0.00 | 2.10 |
| Beam Available but Not in Use | 0.58 | 0.93 | 0.72 | 0.78 | 0.65 | 0.37 | 0.36 | 0.00 | 4.39 |
| Beam Not Available or Unacceptable | 0.05 | 0.03 | 0.17 | 0.03 | 0.00 | 0.00 | 0.23 | 1.00 | 1.50 |
| Accelerator Con- figuration Change | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Experiment Ready | 0.42 | 0.00 | 0.28 | 0.22 | 0.35 | 0.63 | 0.65 | 0.00 | 2.55 |
| Planned Config- uration Change | 0.58 | 0.00 | 0.22 | 0.62 | 0.40 | 0.37 | 0.35 | 1.00 | 3.53 |
| Unplanned Experiment Down | 0.00 | 1.00 | 0.50 | 0.17 | 0.25 | 0.00 | 0.00 | 0.00 | 1.92 |
| Hall not ready reasons | |||||||||
| Target | 0.00 | 1.00 | 0.50 | 0.17 | 0.00 | 0.00 | 0.00 | 0.00 | 1.67 |
| Data Acq | 0.00 | 0.00 | 0.00 | 0.00 | 0.25 | 0.00 | 0.00 | 0.00 | 0.25 |
| Other | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HRSL | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HRSR | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| HALL_OFF | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Comments: Main reason for Exp Not Ready is the LHe target vent (loop 1).
Data Entry by: S. Sirca