Log entry time 00:50:25 on November 13, 2007

Entry number 214189

****************************
 Run Number: 2357
 End of Run Comment:
Run_type=Production,target_type=LH2 15cm + Pb foil Loop3,beam_e0=0.845,beam_raster=on,leftarm_p=0.616298,leftarm_theta=60,leftarm_colli=out,rightarm_p=0.574616,rightarm_theta=60,rightarm_colli=out,comment_text=At the begining the pressure is 20 psi, still increasing
 

syntax error in expression "0/ (  )"
    while executing
"expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  "
    invoked from within
"set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]..."
    invoked from within
"if { $ps($t) != 0 } {
  	     set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]
            } else {
             set  trigger($t,$h) 0
	    }"
    ("foreach" body line 3)
    invoked from within
"foreach t $scalerinfo(triglist) { 
	    set  trigger_real($t,$h)   [ expr $scal($map(trigger-$t,$h))          ]
            if { $ps($t) != 0 } {
  	     set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]
            } else {
             set  trigger($t,$h) 0
	    }
	}"
    ("foreach" body line 4)
    invoked from within
"foreach h { 1 0 -1 } {
	set trigtot($h)      0
	set acc_trigtot($h) 0 
	foreach t $scalerinfo(triglist) { 
	    set  trigger_real($t,$h)   [ expr $scal($map(trigger-$t,$h))          ]
            if { $ps($t) != 0 } {
  	     set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/ ( $ps($t) )  ]
            } else {
             set  trigger($t,$h) 0
	    }
	}
	set trigacc($h)  $scal($map(TS-accept,$h))
	set clock($h)    $scal($map(clock,$h)) 

# Nov 2006:  account for correlations.  
# Every T5 is a T1,T3. 
# Dec 2006: Every T6 is a T1,T2
# Oct 2007: 2-DAQ no T5 or T6

#        set t5corr $trigger(5,$h)
#        set t6corr $trigger(6,$h)
#
	foreach t $scalerinfo(triglist) { 
#            set tcorr 0
#            if { $t == 1 } {
#              # set tcorr $t5corr
#	    } 
#            if { $t == 2 } {
#              # set tcorr $t6corr
#	    } 
#            if { $t == 3 } {
#	      # set tcorr [ expr $t5corr + $t6corr ]
#	    } 
	set  trigtot($h) [ expr $trigtot($h) + $scal($map(trigger-$t,$h))/($ps($t)+0.0001) ]
#	- $tcorr/($ps($t)+0.0001)  ]
    } 

	set hvf(u1,$h)  $scal($map(bcm_u1,$h))
	set hvf(u3,$h)  $scal($map(bcm_u3,$h))
	set hvf(u10,$h) $scal($map(bcm_u10,$h))
	set hvf(d1,$h)  $scal($map(bcm_d1,$h))
	set hvf(d3,$h)  $scal($map(bcm_d3,$h))
	set hvf(d10,$h) $scal($map(bcm_d10,$h))

    }"
    (procedure "halla_scaler_process" line 159)
    invoked from within
"halla_scaler_process .mid.tex scalerinfo "

****************************
End-of-run EPICS data for Run Number 2357 at Tue Nov 13 00:50:22 EST 2007

Wien angle : 37.5018
Half-wave plate (off=out) : OUT
Left Arm D1 momentum : 0.616285
Left Arm arm angle : 59.9997
Right Arm D1 momentum : 0.574601
Right Arm arm angle : 59.9999
HALLA:p : 844.982
HALLA:dpp : 0.000127717
Tiefenbach Hall A energy : 844.982
Left Arm Top VDC Current : -0.292969
Left Arm Bottom VDC Current : 2.29492
Left Arm Q1 momentum : 0.616319
Left Arm Q1 power supply : 463.676
Left Arm Q1 gauss meter : -0.03914
Left Arm Q2 gauss meter : 0.14023
Left Arm Q2 power supply current : 265.35
Left Arm Q2 momentum : 0.616234
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 203.761
Left Arm D1 momentum : 0.616285
Left Arm D1 NMR : 0.228263
Left Arm Q3 gauss meter : -0.12444
Left Arm Q3 power supply current : 245.352
Left Arm Q3 momentum : 0.616278
Left Arm Q3 power supply polarity : disabled
Right Arm Q1 momentum : 0.574739
Right Arm Q1 power supply : 432.113
Right Arm Q1 gauss meter : -0.010928
Right Arm Q2 power supply current : 247.42
Right Arm Q2 momentum : 0.574905
Right Arm Q2 gauss meter : 0.12999
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 197.244
Right Arm D1 momentum : 0.574601
Right Arm D1 NMR : 0.213227
Right Arm Q3 power supply current : 228.597
Right Arm Q3 momentum : 0.574495
Right Arm Q3 gauss meter : 0.10239
Right Arm Q3 power supply polarity : disabled
Average current of the two cavities : 50.9744
Current on Unser monitor : 62.4738
Current on Upstream bcm : 51.0673
Current on Downstream bcm : 50.8814
Upstream Cavity Coefficient : 44
Downstream Cavity Coefficient : 43.854
Current on IBC0L02 (source) : 118.385
Hall C Current : 69.72
MBSY1c magnet current (amp) : 34.8338
MBSY1c Bdl : 210847
Hall A momentum (Tiefenbach) (HALLA:p) : 844.979
Hall A momentum orbit correction (dpp) : 0.000124364
Hall A setup momentum (MMSHLAE) : 845
Hall A energy (halla_MeV) : 844.979
Hall C energy (hallc_MeV) : 4055.41
Delta(E)/E width (MV_AI_DXWID) : 0.640301
IPM1C12.XPOS : -0.49877
IPM1H04A.XPOS : -0.909626
IPM1H04A.YPOS : -0.0997499
IPM1H04B.XPOS : -0.999089
IPM1H04B.YPOS : 0.0218037
Left Arm Collimator : 0.871289
HacL_HPE1313A:0_Ch58 : -0.335449
HacL_HPE1313A:0_Ch55 : 22.9492
HacL_HPE1313A:0_Ch54 : -0.195312
SLI data valid? : No
SLI horiz size mm : 0.0355341
SLI Energy spread *10^5 : 0.658038
SLI x position : 1.24472
SLI vert. size mm : 0.193521
SLI y position : 3.04225