Log entry time 19:42:05 on January 5,2008

Entry number 222796

18:12 Asking MCC to move the beam spot toward (-5.0,0.0)
      T1/T3 Scaler Rates: 10Hz/18Hz
      Harp Scan IHA1H03[AB].01052008_18:20
      DAQ Runs: 4433,4434/22266
18:32 Beam spot to (-3.5,0.0)
      T1/T3 Rates: 13Hz/16Hz @ 5.3uA
      Harp Scan IHA1H03[AB].01052008_18:39
      DAQ Runs: 4435/22267
18:32 Beam spot to (-2.0,0.0)
      T1/T3 Rates: 9Hz/18Hz @ 5.3uA
      Harp Scan IHA1H03[AB].01052008_18:52
      DAQ Runs: 4436/22268
19:00 Beam spot to (-1.0,0.0)
      T1/T3 Rates: 10Hz/17Hz
19:03 Beam spot to (0.0,0.0)
      T1/T3 Rates: 11Hz/15Hz
19:05 Beam spot to (1.0,0.0)
      T1/T3 Rates: 15Hz/30Hz
19:08 Beam spot to (2.0,0.0)
      T1/T3 Rates: 16Hz/30Hz
19:09 Beam spot to (3.0,0.0)
      T1/T3 Rates: 15Hz/30Hz
19:11 Beam spot to (4.0,0.0)
      T1/T3 Rates: 14Hz/34Hz
19:16 Beam spot to (5.0,0.0)
      T1/T3 Rates: 20Hz/40Hz
19:18 Beam spot to (6.0,0.0)
      T1/T3 Rates: 20Hz/44Hz
19:22 Beam spot to (7.0,0.0)
      T1/T3 Rates: 15Hz/30Hz
      At this kinematics, the rates from Al frame probably is too small to see 
any significant change. Stopping the position scan.
19:40 Moving back to (-3.5,0.0) for production