Log entry time 17:12:13 on September 2, 2008

Entry number 242796

****************************
 Run Number: 1332
 End of Run Comment:
Run_type=Test,target_type=Empty,beam_e0=1.192,beam_raster=on,leftarm_p=0.6955,leftarm_theta=53,leftarm_colli=out,bbarm_i=700,bbarm_theta=35,bbarm_zoff=,fppdoor_0p75=closed,fppdoor_1p5=open,fppdoor_3=closed,fppdoor_6=open,fppdoor_9=open,comment_text=wirechamber test
 

PRESCALE FACTORS:can't read "psfacline": no such variable
    while executing
"$w insert end "$psfacline..."
    (procedure "halla_scaler_process" line 307)
    invoked from within
"halla_scaler_process .mid.tex scalerinfo "

****************************
End-of-run EPICS data for Run Number 1332 at Tue Sep 2 17:10:37 EDT 2008

Wien angle : 0.195965
Half-wave plate (off=out) : IN
Left Arm D1 momentum : 0.0156641
Left Arm arm angle : -0.179
Right Arm D1 momentum : 0.00431172
Right Arm arm angle : 0.197
HALLA:p : HALLA:p --- Invalid channel name
HALLA:dpp : HALLA:dpp --- Invalid channel name
Tiefenbach Hall A energy : 0
Left Arm Top VDC Current : 1.31836
Left Arm Bottom VDC Current : 1.41602
-----
Left Arm Q1 momentum : 0.226636
Left Arm Q1 power supply : 0
Left Arm Q1 gauss meter : 0.014794
Left Arm Q2 gauss meter : -4.05e-05
Left Arm Q2 power supply current : 0
Left Arm Q2 momentum : 0.000846712
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : 0
Left Arm D1 momentum : 0.0156668
Left Arm D1 NMR : 0.162677
Left Arm Q3 gauss meter : 0.00079159
Left Arm Q3 power supply current : 0
Left Arm Q3 momentum : 0.000133043
Left Arm Q3 power supply polarity : enabled
-----
Right Arm Q1 momentum : 0.00259279
Right Arm Q1 power supply : 0
Right Arm Q1 gauss meter : 2.89e-05
Right Arm Q2 power supply current : -0.000244028
Right Arm Q2 momentum : -5.67023e-07
Right Arm Q2 gauss meter : -0.0002764
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : -0.00271464
Right Arm D1 momentum : 0.00429946
Right Arm D1 NMR : 12.6852
Right Arm Q3 power supply current : 3.7363e-06
Right Arm Q3 momentum : 6.10099e-05
Right Arm Q3 gauss meter : -0.0002891
Right Arm Q3 power supply polarity : enabled
-----
BigBite magnet current setpoint : 0
BigBite magnet current readback : 0
BigBite Gaussmeter readback : -0.0020843
-----
Average current of the two cavities : hac_bcm_average --- Invalid channel name
Current on Unser monitor :
Current on Upstream bcm :
Current on Downstream bcm :
Upstream Cavity Coefficient :
Downstream Cavity Coefficient :
Current on IBC0L02 (source) : 5.85569e-38
Hall C Current : -0.216042
MBSY1c magnet current (amp) :
MBSY1c Bdl : 297794
Hall A momentum (Tiefenbach) (HALLA:p) :
Hall A momentum orbit correction (dpp) :
Hall A setup momentum (MMSHLAE) :
Hall A energy (halla_MeV) : 0
Hall C energy (hallc_MeV) : 0
Delta(E)/E width (MV_AI_DXWID) :
IPM1C12.XPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS :
IPM1H04B.XPOS : 0
IPM1H04B.YPOS :
-----
Left Arm Collimator : 0.0575684
HacL_HPE1313A:0_Ch58 :
HacL_HPE1313A:0_Ch55 : 23.9258
HacL_HPE1313A:0_Ch54 :
-----
Right Arm Collimator : -0.00849609
HacR_HPE1313A:0_Ch58 :
HacR_HPE1313A:0_Ch55 : 22.8027
HacR_HPE1313A:0_Ch54 :
-----
Wien angle : 0.195965
Helicity Mode ON/OFF Random/Toggle :
Wien BDL : 0
Wien field : 0
Laser attenuation Hall A : 55
Laser power Hall A : 100
Half-wave plate (off=out) : IN
rotating waveplate : 0
Beam Half-wave plate (off=out) : IN
-----
G0 Helicity Settle Set : 500 usec
G0 Helicity Delay Set : No Delay
G0 Helicity Pattern Set : Pair
G0 Helicity Cycle Rate Set : 30 Hz
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : No Delay
G0 Helicity Pattern : Pair
G0 Helicity Cycle Rate Read : 30 Hz
-----
SLI data valid? : No
SLI horiz size mm : 0
SLI Energy spread *10^5 : 0
SLI x position : 1.92298
SLI vert. size mm : 0
SLI y position : 1.90047
-----
Target : haBDSSELECT --- Invalid channel name
fan frequency loop 1 : haL1_Fan_frequency_R --- Invalid channel name
fan frequency loop 3 : haL3_Fan_frequency_R --- Invalid channel name
Encoder position : haBDSPOS.VAL --- Invalid channel name
Target type : haBDSPOS --- Invalid channel name
temperature loop 1(1) : haITC502_1_Sensor_1_R --- Invalid channel name
temperature loop 1(2) : haITC502_1_Sensor_2_R --- Invalid channel name
temperature loop 1(3) : haITC502_1_Sensor_3_R --- Invalid channel name
temperature loop 3(1) : haITC502_3_Sensor_1_R --- Invalid channel name
temperature loop 3(2) : haITC502_3_Sensor_2_R --- Invalid channel name
temperature loop 3(3) : haITC502_3_Sensor_3_R --- Invalid channel name
Heat exchange LH2 : haL1_Cernox_HX_R --- Invalid channel name
Heat exchange LH2 : haL3_Cernox_HX_R --- Invalid channel name
HPH H2 loop 1 : haL1_hp_power_R --- Invalid channel name
HPH H2 loop 3 : haL3_hp_power_R --- Invalid channel name
-----