• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT

    User name Kalyan

    Log entry time 18:45:38 on September 15, 2008

    Entry number 243210

    Followups:

    keyword=Scaler gates and target signals in L-HRS

    The target signals and the gates for the scaler on the L-HRS have been arranged through a 16 channel flat sheilded cable running from BigBite weldment to L-HRS. This cable is plugged into a LeCroy 4616 (ECL-NIM converter) in the middle rack NIM bin( 2nd from bottom). Here is the signal discription.

    Red colored cables is channel 1.

    ============================= Channel signal type ============================= 1 hel+, tar+ gate 2 hel+, tar- gate 3 hel-, tar+ gate 4 hel-, tar- gate 5 target up(+) 6 target dwn(-) =============================

    Note:

    1. hel+ is formed out of normal helicity signal and hel- is formed of inverted helicity signal.

    2. tar+ is target up and tar- is target down

    3. The scaler gates are veto signals and directly plugs into the scalers.



    A copy of this log entry has been emailed to: rom@jlab.org, jiang@jlab.org, vasulk@jlab.org, jinhuang@jlab.org, kalyan@jlab.org