0800 | 0900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0.00 | 0.67 | 0.00 | 0.33 | 0.75 | 0.00 | 0.00 | 0.33 | 2.08 |
Beam Available but Not in Use | 0.00 | 0.08 | 0.53 | 0.25 | 0.07 | 0.08 | 0.00 | 0.30 | 1.31 |
Beam Not Available or Unacceptable | 1.00 | 0.25 | 0.47 | 0.42 | 0.18 | 0.92 | 1.00 | 0.36 | 4.60 |
Accelerator Con- figuration Change | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Experiment Ready | 1.00 | 0.92 | 0.33 | 0.75 | 0.75 | 0.50 | 0.00 | 0.33 | 4.58 |
Planned Config- uration Change | 0.00 | 0.08 | 0.67 | 0.25 | 0.25 | 0.00 | 0.00 | 0.25 | 1.50 |
Unplanned Experiment Down | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.50 | 1.00 | 0.42 | 1.92 |
Hall not ready reasons | |||||||||
Target | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Data Acq | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Other | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
HRSL | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.50 | 1.00 | 0.42 | 1.92 |
HRSR | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
HALL_OFF | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Bbite | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Comments: 08:00 No beam, optics target in 09:15 Start checking beam positions after return of CW beam. 10:00 Requested a harp scan from MCC 10:20 MCC reported results of harp scan. Setting up for 3He running. 11:00 First NMR complete. 11:25 Change to 3He target. This required a polarization change, which takes a little while. 11:34 Start raster scan 12:00 Recheck NMR measurement before production. 12:04 Request 5uA with 4x4 raster on 3He target for production running. 13:30 Cryo excersion took out HRS-L Q3, and the target polarization dropped t 14%--This was a minsomer. 14:00 Still waiting for word from cryo. RC has been updated. 14:18 Cryo On-Call just called to let us know that he'll be here in about 5 minutes. 15:10 Cryo got the level back on the Q3 and it reset remotely.
Data Entry by: E. Schulte