Make New Entry,
Make Followup Entry
User name Jack (techs)
Log entry time 19:17:10 on February 14, 2009
Entry number 261190
The RQ2 was on and at 100 amps. I raised it to 150A and it responded. The
Dipole had a fault. The fault cleared and I set it to 50A. It started
ramping up. The VDC HVs were tripped. I reset them and set them to 4kV.
All should be right in the Right Arm world, now.
A copy of this log entry has been emailed to: email@example.com,firstname.lastname@example.org,email@example.com