NEXT
Make New Entry,
Make Followup Entry
User name a-onl
Log entry time 09:22:31 on April 25, 2009
Entry number 268281
keyword=Start_Run_1421,Run_type=Optics,target_type=Reference Cell: H2,targetpol_poldir=Transverse-in-plane,targetpol_pol=58.7,beam_e0=1.245,beam_raster=on,beam_halfwaveplate=in,leftarm_p=1.1406,leftarm_theta=17.0,leftarm_sieve=out,bbarm_i=518,bbarm_theta=45,bbarm_sieve=out,bbarm_zoff=0,comment_text=reference optics, delta=-3%, cross calibration, ps1=6, ps3=3, ps4=3. From this run 1412, ps5 is changed from 65535 to 1677712
Run Timestamp: Sat Apr 25 09:22:10 EDT 2009
Beginning-of-run EPICS data for Run Number 1421 at Sat Apr 25 09:22:14 EDT 2009
Run_type=Optics
target_type=Reference Cell: H2
targetpol_poldir=Transverse-in-plane
targetpol_pol=58.7
beam_e0=1.245
beam_raster=on
beam_halfwaveplate=in
leftarm_p=1.1406
leftarm_theta=17.0
leftarm_sieve=out
bbarm_i=518
bbarm_theta=45
bbarm_sieve=out
bbarm_zoff=0
comment_text=reference optics, delta=-3%, cross calibration, ps1=6, ps3=3, ps4=3. From this run 1412, ps5 is changed from 65535 to 1677712
; LeftHRS(+BB) on adaql2/a-onl account
; Prescale factors (integer), downloaded each run at prestart.
; Change this file only in-between runs.
; Maxima: (2^24)-1 = 16777215 for T1-T4 and 65535 for T5-T8
; The default factor is essentially infinite.
; T3 = L-HRS Singles (S1.and.S2)
; T4 = L-HRS Efficiency (S1.or.S2)
; T8 = 1024 Hz pulser
; String should be one line, no spaces, ending in carriage return
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
ps1=300,ps2=16777215,ps3=3,ps4=3,ps5=16777215,ps6=65535,ps7=65535,ps8=65535
Left Arm Q1 momentum : 1.14057
Left Arm Q1 power supply : 858.137
Left Arm Q1 gauss meter : -0.07227
Left Arm Q2 power supply current : 491.043
Left Arm Q2 momentum : 1.14037
Left Arm Q2 gauss meter : 0.2588
Left Arm Q2 power supply polarity : disabled
Left Arm D1 power supply current : 379.943
Left Arm D1 momentum : 1.14058
Left Arm D1 NMR : 0.422244
Left Arm Q3 power supply current : 454.135
Left Arm Q3 momentum : 1.1407
Left Arm Q3 gauss meter : -0.22916
Left Arm Q3 power supply polarity : disabled
Left Arm B Field Hall Probe (D-G) : -0.4073
-----
BigBite magnet current setpoint : 518
BigBite magnet current readback : 515.443
BigBite Gaussmeter readback : -0.29713
-----
Left Arm Top VDC Current : 2.88086
Left Arm Bottom VDC Current : 1.12305
Left Arm Top VDC voltage : 4.00293
Left Arm Bottom VDC voltage : 3.99805
-----
Right Arm Top VDC Current : -0.537109
Right Arm Bottom VDC Current : -2.58789
Right Arm Top VDC voltage : 3.99512
Right Arm Bottom VDC voltage : 3.9917
-----
Average current of the two cavities : 2.06199
Current on Unser monitor : -4.94002
Current on Upstream bcm : 2.05426
Current on Downstream bcm : 2.06972
Upstream Cavity Coefficient : 48.345
Downstream Cavity Coefficient : 47.773
Current on IBC0L02 (source) : 2.14323
Hall C Current : 30.8537
Hall A momentum (Tiefenbach) (HALLA:p) : 1245.22
Hall A momentum orbit correction (dpp) : -1.93979e-05
Hall A setup momentum (MMSHLAE) : 1246.8
Hall A energy (halla_MeV) : 1245.22
Hall C energy (hallc_MeV) : 5971.72
Delta(E)/E width (MV_AI_DXWID) : 0.219282
MBSY1c magnet current (amp) : 51.6726
MBSY1c Bdl : 310988
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 6
Raster Y width : 5
-----
HacL_HPE1313A:0_Ch58 : -0.155273
HacL_HPE1313A:0_Ch55 : 23.584
HacL_HPE1313A:0_Ch54 : 0.00292969
Left Arm Angle Floor Angle : 17
Left Arm Angle Vernier : 31.5
Left Arm Scattering Angle : 17.0026
-----
Right Arm D1 momentum : 1.14058
Right Arm arm angle : 16.9999
-----
Left VDC -DISC LVL Top : 3.89648
Left VDC -DISC LVL Bottom : 3.96387
Left VDC -DISC LVL Voltage1 : 4.97217
Left VDC -DISC LVL Voltage2 : -5.06006
-----
IPM1C12.XPOS : 0.00712395
IPM1C12.YPOS : 0.17834
IPM1H04A.XPOS : -0.48187
IPM1H04A.YPOS : 2.07896
IPM1H04B.XPOS : -0.481624
IPM1H04B.YPOS : 1.98967
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
-----
Wien angle : -14.3961
Helicity Mode ON/OFF Random/Toggle : OFF
Wien field : 9.4913
Laser attenuation Hall A : 86
Laser power Hall A : 100
Half-wave plate (off=out) : OUT
rotating waveplate : 0
Beam Half-wave plate (off=out) : OUT
-----
G0 Helicity Settle Read : 500 usec
G0 Helicity Delay Read : No Delay
G0 Helicity Pattern : Quartet
G0 Helicity Cycle Rate Read : 30 Hz
-----
target OTR x-position : -10.5973
target OTR y-position : 5
target OTR x-width : 0
target OTR y-width : -0
target OTR data valid flag : No
target OTR In/Out : OTR is Out
-----
RTD1 (upstream) : 47.1484
RTD2 : 98.3496
RTD3 : 58.6328
RTD4 : 55.918
RTD5 (downstream) : 43.418
RTD6 (pump cell up) : 245.801
RTD7 (pump cell down) : 244.922
HacAi_hpchan7: Temp at Ref. Cell : 36.6699
HacAi_hpchan8: Temp at Ref. Cell : 39.4922
HacAi_hpchan9: Temp at Ref. Cell : 38.1055
Reference Cell Gas Pressure (psi) : -215.01
Reference Cell System Vacuum (Torr) : -176.658
Cooling Jets Flow Rate : 50.5554
Target position : -0.22
Oven Air Flow : 230.3
-----
HaGenTargBrake : enabled
HaGenTargBrake : enabled
HacOMEGA_AL1 : 0
HacOMEGA_READ : 230.4
HacOMEGA_SP1 : 230
HacOMEGA_PROP1 : 1000
HacOMEGA_RST1 : 120
HacOMEGA_RATE : 0
-----
CLASER_STATE_MB : Disabled
CLASER_RDCUR : 9
CLASER_TEMP : 14
-----
CLASER2_STATE_MB : Disabled
CLASER2_RDCUR : 0
CLASER2_TEMP : 0
-----
CLASERAB_STATE_MB : Disabled
CLASERAB_GETCUR0 : 0
CLASERAB_GETCUR1 : 0
CLASERAB_GETTEMP0 : 0
CLASERAB_GETTEMP1 : 0
-----
CLASER3_STATE_MB : Disabled
CLASER3_RDCUR : 8
CLASER3_TEMP : 23
-----
CLASER4_STATE_MB : Disabled
CLASER4_RDCUR : 8
CLASER4_TEMP : 16
-----
CLASER5_STATE_MB : Disabled
CLASER5_RDCUR : 9
CLASER5_TEMP : 19.2
-----
CLASER6_STATE_MB : Disabled
CLASER6_RDCUR : 9
CLASER6_TEMP : 14
-----
CLASERAB2_STATE_M : Disabled
CLASERAB2_GETCUR0 : 0
CLASERAB2_GETCUR1 : 0
CLASERAB2_GETTEMP0 : 0
CLASERAB2_GETTEMP1 : 0
----
CLASERAB3_STATE_M : Disabled
CLASERAB3_GETCUR0 : 0
CLASERAB3_GETCUR1 : 0
CLASERAB3_GETTEMP0 : 0
CLASERAB3_GETTEMP1 : 0
----
nld1_lasmdp : 34.9941
ntc1_temp : 26.0348
nld1_lasouti : Enable
ntc1_tecouti : Enable
nld1_lascond : 1024
----
nld2_lasmdp : 34
ntc2_temp : 20
nld2_lasouti : Enable
ntc2_tecouti : Enable
nld2_lascond : 1024
----
nld3_lasmdp : 35.9951
ntc3_temp : 25.4484
nld3_lasouti : Enable
ntc3_tecouti : Enable
nld3_lascond : 1024
----
DDM45_1disp1_read : 0.028
DDM45_2disp1_read : 13.0198
DDM45_3disp1_read : -0.218
----
haPolHe3_Spin_State : 0
haPolHe3_Flip_Sequence_ID : 341
haPolHe3_Flip_Count : 2
haPolHe3_EPR_ID : 4221122
haPolHe3_EPR_POL : 78.62
haPolHe3_Last_Flip_Start : 18:12:48 4/22/2009
haPolHe3_Last_Flip_End : 18:12:53 4/22/2009
haPolHe3_FLIP_NMR_PHASE : 189.336
haPolHe3_FLIP_NMR_Mag : 7.61719
haPolHe3_FLIP_NMR_Pol : 63.22
HaGenTargSpin1 : enabled
HaGenTargSpin2 : disabled
HaGenTargPos : -0.22
----
SLI data valid? : No
SLI horiz size mm : 0
SLI Energy spread *10^5 : 0
SLI x position : 2.37019
SLI vert. size mm : 0
SLI y position : 1.6
-----
Left S2 HV Left PMTs
S2 Slot0 ch0 Left : -1889.9
S2 Slot0 ch1 Left : -1872
S2 Slot0 ch2 Left : -2239.4
S2 Slot0 ch3 Left : -2045.7
S2 Slot0 ch4 Left : -2125.1
S2 Slot0 ch5 Left : -1828.9
S2 Slot0 ch6 Left : -2017.9
S2 Slot0 ch7 Left : -1932.1
S2 Slot0 ch8 Left : -1871.2
S2 Slot0 ch9 Left : -2056.4
S2 Slot0 ch10 Left : -2190.7
S2 Slot0 ch11 Left : -2009.8
S2 Slot13 ch0 Left : -2190.9
S2 Slot13 ch1 Left : -2166.3
S2 Slot13 ch2 Left : -1896.6
S2 Slot13 ch3 Left : -1743.2
-----
Left S2 HV Right PMTs
S2 Slot12 ch0 Right : -1767.2
S2 Slot12 ch1 Right : -1781.5
S2 Slot12 ch2 Right : -1968.6
S2 Slot12 ch3 Right : -1847.5
S2 Slot12 ch4 Right : -1984.6
S2 Slot12 ch5 Right : -1903.7
S2 Slot12 ch6 Right : -1959.1
S2 Slot12 ch7 Right : -1898
S2 Slot12 ch8 Right : -2014.9
S2 Slot12 ch9 Right : -1988.7
S2 Slot12 ch10 Right : -2040.6
S2 Slot12 ch11 Right : -1709.4
S2 Slot13 ch4 Right : -1756.9
S2 Slot13 ch5 Right : -1879.1
S2 Slot13 ch6 Right : -1858.7
S2 Slot13 ch7 Right : -1833.5
-----
Left S1 HV
S1 Slot1 ch0 : -1801.2
S1 Slot1 ch1 : -1796.8
S1 Slot1 ch2 : -1807
S1 Slot1 ch3 : -1840.8
S1 Slot1 ch4 : -1719
S1 Slot1 ch5 : -1890.6
S1 Slot1 ch6 : -1946.8
S1 Slot1 ch7 : -1720.7
S1 Slot1 ch8 : -1954.9
S1 Slot1 ch9 : -1772.3
S1 Slot1 ch10 : -1824.4
S1 Slot1 ch11 : -1743.7
-----
Left Cerenkov HV
GCER Slot2 ch0 : -1521.5
GCER Slot2 ch1 : -1452.3
GCER Slot2 ch2 : -1515.8
GCER Slot2 ch3 : -1431.8
GCER Slot2 ch4 : -1781.1
GCER Slot2 ch5 : -1985.2
GCER Slot2 ch6 : -27.1
GCER Slot2 ch7 : -1724.8
GCER Slot2 ch8 : -1993
GCER Slot2 ch9 : -1538.1
GCER Slot2 ch10 : -1663.9
GCER Slot2 ch11 : -14.6
-----
Left Pion Rejector Layer 1 HV
PRL1 Slot3 ch0 : -900.3
PRL1 Slot3 ch1 : -814.3
PRL1 Slot3 ch2 : -931.9
PRL1 Slot3 ch3 : -986.6
PRL1 Slot3 ch4 : -787.1
PRL1 Slot3 ch5 : -886.9
PRL1 Slot3 ch6 : -1095
PRL1 Slot3 ch7 : -1012.6
PRL1 Slot3 ch8 : -834.9
PRL1 Slot3 ch9 : -816.1
PRL1 Slot3 ch10 : -886.6
PRL1 Slot3 ch11 : -809.5
PRL1 Slot4 ch0 : -901.1
PRL1 Slot4 ch1 : -931.4
PRL1 Slot4 ch2 : -768.2
PRL1 Slot4 ch3 : -941.2
PRL1 Slot4 ch4 : -921.7
PRL1 Slot4 ch5 : -825.1
PRL1 Slot4 ch6 : -837.5
PRL1 Slot4 ch7 : -829.5
PRL1 Slot4 ch8 : -1190.3
PRL1 Slot4 ch9 : -1039.2
PRL1 Slot4 ch10 : -1079.5
PRL1 Slot4 ch11 : -877.4
PRL1 Slot5 ch0 : -1075.5
PRL1 Slot5 ch1 : -902.4
PRL1 Slot5 ch2 : -945.2
PRL1 Slot5 ch3 : -764.9
PRL1 Slot5 ch4 : -917.5
PRL1 Slot5 ch5 : -823.3
PRL1 Slot5 ch6 : -838.7
PRL1 Slot5 ch7 : -891.8
PRL1 Slot5 ch8 : -786.7
PRL1 Slot5 ch9 : -841.4
PRL1 Slot5 ch10 : -16.5
PRL1 Slot5 ch11 : -25.6
-----
Left Pion Rejector Layer 2 HV
PRL2 Slot9 ch0 : -900.6
PRL2 Slot9 ch1 : -919.6
PRL2 Slot9 ch2 : -794.8
PRL2 Slot9 ch3 : -883.7
PRL2 Slot9 ch4 : -812.4
PRL2 Slot9 ch5 : -931.6
PRL2 Slot9 ch6 : -852.2
PRL2 Slot9 ch7 : -886.7
PRL2 Slot9 ch8 : -827.5
PRL2 Slot9 ch9 : -777.6
PRL2 Slot9 ch10 : -834
PRL2 Slot9 ch11 : -842.2
PRL2 Slot10 ch0 : -754.2
PRL2 Slot10 ch1 : -798.9
PRL2 Slot10 ch2 : -861.1
PRL2 Slot10 ch3 : -881.2
PRL2 Slot10 ch4 : -968.4
PRL2 Slot10 ch5 : -805.9
PRL2 Slot10 ch6 : -796.1
PRL2 Slot10 ch7 : -821.8
PRL2 Slot10 ch8 : -773
PRL2 Slot10 ch9 : -721.1
PRL2 Slot10 ch10 : -901.8
PRL2 Slot10 ch11 : -795.7
PRL2 Slot11 ch0 : -989.2
PRL2 Slot11 ch1 : -922.7
PRL2 Slot11 ch2 : -863.6
PRL2 Slot11 ch3 : -1079.1
PRL2 Slot11 ch4 : -1053.3
PRL2 Slot11 ch5 : -805.4
PRL2 Slot11 ch6 : -858.9
PRL2 Slot11 ch7 : -1007.6
PRL2 Slot11 ch8 : -903.7
PRL2 Slot11 ch9 : -863.5
PRL2 Slot11 ch10 : -2.9
PRL2 Slot11 ch11 : -11.7
-----
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
# Map usage: Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map usage: Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map HV_ Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_ -c GET -P MV
# Map HV_ Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_ -c GET -P MC
# Map HV_Port Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_Port -c GET -P MV
# Map HV_Port Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: 5555
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D HV_Port -c GET -P MC
# Map 'command_message' Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map 'command_message' Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Examples: Measured Voltage
*** Map name 1:,1: is missing or not properly set in the server list :
/adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Error(2) in information retrieval in -D Examples: -c GET -P MV
# Map Examples: Measured Current
*** Map name 1:,1: is missing or not properly set in the server list :
/adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe.
usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
HV_ hostname - name(or IP address) of HV mainframe
HV_Port - number of HV port for TCP/IP connetction(1090 default)
'command_message' - message for sending to HV mainframe(string with quotas)
Examples:
Send command to HV mainframe 'hallahv1':
/adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090 -m 'LD L0.1 DV -1000.'
Send command to control program running on 'adaqel1'
for setup voltage on HVframe 0:
/adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555 -m '0 LD L0.1 DV -1000.'
Error(2) in information retrieval in -D Examples: -c GET -P MC
# Map Send Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Send Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
# Map Send Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map Send Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map for Measured Voltage
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map for Measured Current
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 99 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 104 0 0 0 0 1090 0 76 0 0 0 0 0 0 0 0 0 0 97 0 0 0 0 0 0 0 0 0 0 5555 0 48 0 0 0 0 # Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Voltage
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MV
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
# Map /adaqfs/home/a-onl/slowc/hvg/hvcli Measured Current
hv_proc.com - a script to get HV parameters from the "hvs" server
Call parameters:
hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
where:
-c command (GET or SET or MAPS) default: GET
MAPS: just prints the maps names
(-D should be defined, the other parameters are ignored)
-P parameter to use : DV, MV, MC, CE default: MC
for -c SET the valid parameters are DV, CE
-D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
-m colums,rows range, ex: 3,17 or 2:13,7:9 default: none
-v value to SET (used if no -f declared) default: none
-f file name containing lines with "ix iy value" default: none
-t test only default: none
-H host name where the server is running default: none
(if none - for NA and for BB)
-p port number default: rogram
-b client program default: /adaqfs/home/a-onl/slowc/hvg/hvcli
-? or ? or -h print this help default: none
Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26
Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27
Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27
Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27
Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27
Error(2) in information retrieval in -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
Threshold for 'mwdc_front' is +4.998 V (2730)
Threshold for 'mwdc_back' is +4.998 V (2730)
Threshold for 'E' in slot 1 is -0.060 V (207)
Threshold for 'E' in slot 2 is -0.060 V (207)
Threshold for 'E' in slot 3 is -0.060 V (207)
Threshold for 'dE' in slot 21 is -0.060 V (207)
Threshold for 'dE' in slot 22 is -0.060 V (207)
Threshold for 'dE' in slot 23 is -0.060 V (207)
Threshold for 'dEtrigger' in slot 17 is -0.120 V (447)
Threshold for 'dEtrigger' in slot 18 is -0.120 V (447)
Threshold for 'ND_veto' in slot 2 is -0.050 V (53)
Threshold for 'ND_veto' in slot 3 is -0.050 V (53)
Threshold for 'ND_veto' in slot 21 is -0.050 V (53)
Threshold for 'ND_veto' in slot 22 is -0.050 V (53)
CODA config : config LeftHrs
HAPPEX run : 31266