NEXT
Make New Entry,
Make Followup Entry
User name apar
Log entry time 02:04:00 on March 9, 2010
Entry number 311156
keyword=End_of_Parity_Run_1838__CODA_Config=CHInj2
************************************************
Run Number: 1838
End of Run Comment:
Run_type=Test,beam_energy=0,beam_polarization=0,beam_raster=on,comment_text=injector studies::120 Hz, Pol. left, RHWP scan, IHWP OUT,dithering_magnet=off,dithering_magnets=,leftarm_p=0,leftarm_theta=0,parity_feedback=off,parity_ihwp=out,rightarm_p=0,rightarm_theta=0,target_fanspeed=0 Hz,target_type=Empty
************************************************
End-of-Parity-run EPICS data for Run Number 1838 at Tue Mar 9 02:03:52 EST 2010
CODA Configuration: CHInj2
# Timing board information: # Integrate Time = 3.84 ms, Ramp Delay = 0.00 us oversamp 1
Compton Run Number : 0
-----------------------------------------
Wien angle (Vertical) : 88.8235
Wien Vertical BDL (Gcm) : 2148.9
Wien HV Polarity : OFF
Wien electrode Voltage : 55.48
Wien angle (Solenoids) : -90.7456
Wien BDL (First Solenoid) (Gcm) : -876.345
Wien BDL (Second Solenoid) (Gcm) : -876.346
Wien angle (Horizontal) : -47.1097
Wien BDL (Gcm) : -1085.6
Wien HV Polarity (Horizontal) : ON
Wien electrode Voltage (Horizontal) : 29.741
Laser attenuation Hall A : 121
Laser power Hall A : 100
Beam Half-wave plate Set(off=out) : OUT
Beam Half-wave plate Read(off=out) : OUT
Rotating waveplate : 9000
IA Cell Setpoint Hall A : 4.96
IA Cell Setpoint Hall C : 5
PZT X Setpoint Hall A : 4
PZT Y Setpoint Hall A : 4
PZT X Setpoint Common : 5
PZT Y Setpoint Common : 5
Gun2: PC (PITA) POS : 7.476
Gun2: PC (PITA) NEG : 7.796
Gun3: PC (PITA) POS : 5
Gun3: PC (PITA) NEG : 5
Pockels Cell Voltage POS : 2.95238
Pockels Cell Voltage NEG : 2.73016
Helicity Clock Set : Free Clock
Helicity Delay Set : 8 windows
Helicity Pattern Set : Quartet
Helicity Clock Read : Free Clock
Helicity Settle Read : 100
Helicity Delay Read : 8 windows
Helicity Pattern Read : Quartet
Helicity Frequency : 120.048
-----------------------------------------
Compton stuffs
-----------------------------------------
Laser power : Pwr 84mW
Calculated power in cavity : 1.37926
Photodiode on table : 31.0568
Laser X position on QPD 1 : -147.891
Laser Y position on QPD 1 : 108.924
Laser X position on QPD 2 : -2.15588e+07
Laser Y position on QPD 2 : 442.478
QPD 1 sum : -0.00366241
QPD 2 sum : -7.45058e-08
Position set point for adjustable
mirror 1 (either x or y) : -1900000[c]
Position set point for adjustable
mirror 2 (either x or y) : 43290[c]
Laser minimum temperature (35.8) : 32.3
Laser temperature set point : +41.913
Polarisation in cavity : RIGHT
Reflection photodiode : 0.0592077
Gain of locking servo : 168
Tracking level (V) of locking servo : 0.35
Slow locking signal sent to laser : 0.151987
Fast locking signal sent to laser : 9.20527
Calculated polarisation in cavity : 15.732
Photodiode 1 after Wollaston prism : 0.0613119
Photodiode 2 after Wollaston prism : 0.0446431
Step size for RHWP scan : 11610
Laser temp slow ramp (1 = on) : OFF
Extent of laser temp slow ramp (C) : 0.1
Speed of laser temp slow ramp up : 150
Speed of laser temp slow ramp down : 150
-----------------------------------------
Left Arm Magnets
-----------------------------------------
Left Arm Q1 power supply current : 0
Left Arm Q1 momentum : 0.000700953
Left Arm Q1 gauss meter : 0.0002642
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : -0.000363148
Left Arm Q2 momentum : -8.47737e-07
Left Arm Q2 gauss meter : 0.0010372
Left Arm Q2 power supply polarity : enabled
Left Arm D1 power supply current : -0.00223047
Left Arm D1 momentum : 0.00321465
Left Arm D1 NMR : 0.270416
Left Arm Q3 power supply current : -0.000421293
Left Arm Q3 momentum : -1.21641e-06
Left Arm Q3 gauss meter : -0.00012788
Left Arm Q3 power supply polarity : enabled
-----------------------------------------
Right Arm Magnets
-----------------------------------------
Right Arm Q1 power supply current : 0.16022
Right Arm Q1 momentum : 0.00172322
Right Arm Q1 gauss meter : -5.25e-05
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : -0.0173445
Right Arm Q2 momentum : -4.08342e-05
Right Arm Q2 gauss meter : 0.000542
Right Arm Q2 power supply polarity : enabled
Right Arm D1 power supply current : 2.0316
Right Arm D1 momentum : 0.0108985
Right Arm D1 NMR : 0.182963
Right Arm Q3 power supply current : -0.00625831
Right Arm Q3 momentum : -1.53524e-05
Right Arm Q3 gauss meter : 7.46e-05
Right Arm Q3 power supply polarity : disabled
-----------------------------------------
HallA & Injector BCMs and Energy
-----------------------------------------
Average current of the two cavities : 0.0230632
Current on Unser monitor : 18.2147
Current on Upstream bcm : 0.0339551
Current on Downstream bcm : 0.0121714
Upstream Cavity Coefficient : 42.6
Downstream Cavity Coefficient : 43.8
Current on IBC0L02 (source) : 0.00188289
Tiefenbach Hall A energy : 1056.63
Tiefenbach Hall C energy : 5059.75
Delta(E)/E width (MV_AI_DXWID) : 11.0233
MBSY1c Hall A Beam energy : 1057.43
MBSY3c Hall C Beam energy : 5075.43
MBSY1c magnet current (amp) : 0.0377197
MBSY1c Bdl : 263884
-----------------------------------------
ARC stuff and Raster
-----------------------------------------
Arc1 dp/p : 0
Arc2 dp/p : 0
Raster X width : 0.2
Raster Y width : 0.2
-----------------------------------------
Target BPMs
-----------------------------------------
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpm4A : -0.63
Survey Y offset bpm4A : -0.9
Survey X offset bpm4B : 0.77
Survey Y offset bpm4B : -1
Survey X offset bpm12 : 0
Survey Y offset bpm12 : 0
Survey X HI SAT bpm12 : 0
Survey Y HI SAT bpm12 : 0
-----------------------------------------
CRYO TARGET INFO
-----------------------------------------
Target : L2 20cm
Encoder position : 0
fan frequency loop 1 : 0
fan frequency loop 2 : 0
fan frequency loop 3 : 0
temperature loop 1-1 : 119.99
temperature loop 1-2 : 119.99
temperature loop 1-3 : 119.99
temperature loop 2-1 : 100.09
temperature loop 2-2 : 95.14
temperature loop 2-3 : 119.99
temperature loop 3-1 : 0
temperature loop 3-2 : 0
temperature loop 3-3 : 0
pressure fill target H2 : 14.6532
pressure fill bottle H2 : 14.5953
pressure ballast H2 : 23.7507
pressure exhaust H2 : 14.6639
cryogen input temp : 299.8
crogen return flow : 0.100352
JT valve setting : 98.4375
-----------------------------------------
Parameters used for HAPPEX feedback
-----------------------------------------
Parity DAQ Feedback Control (ON=1) : 1
HAPPEX Feedback results from
/adaqfs/halla/apar/feedback/runlog/ffb_1838.log:
Cumulative stats for 133129 events:
Events failing cut conditions:
0 Low_beam 2
1 Beam_burp 1
2 Evt_seq 10
3 Pair_seq 38
4 Startup 1
5 Low_beam_c 0
--------------------------------------------------