• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name a-onl

    Log entry time 04:44:43 on June 26, 2010

    Entry number 328299

    keyword=Start_Run_1103,Run_type=Calibration,target_type=BeO,beam_e0=1.063,beam_raster=on,beam_current=2,leftarm_p=1.063,leftarm_theta=5.0,leftarm_sieve=out,rightarm_p=1.063,rightarm_theta=5.0,rightarm_sieve=out,comment_text=
    Run Timestamp:       Sat Jun 26 04:43:52 EDT 2010
    Beginning-of-run EPICS data for Run Number 1103 at Sat Jun 26 04:44:27 EDT 2010
    
    
    
    Run_type=Calibration
    target_type=BeO
    beam_e0=1.063
    beam_raster=on
    beam_current=2
    leftarm_p=1.063
    leftarm_theta=5.0
    leftarm_sieve=out
    rightarm_p=1.063
    rightarm_theta=5.0
    rightarm_sieve=out
    comment_text=
    
    
    
    
    Left Arm Q1 momentum : 0.559852
    Left Arm Q1 power supply : 280.491
    Left Arm Q1 gauss meter : -0.02342
    Left Arm Q2 power supply current : 228.856
    Left Arm Q2 momentum : 0.560097
    Left Arm Q2 gauss meter : 0.12055
    Left Arm Q2 power supply polarity : disabled
    Left Arm D1 power supply current : 183.586
    Left Arm D1 momentum : 0
    Left Arm D1 NMR : 0.391743
    Left Arm Q3 power supply current : 268.86
    Left Arm Q3 momentum : 0.559848
    Left Arm Q3 gauss meter : -0.13579
    Left Arm Q3 power supply polarity : disabled
    Left Arm B Field Hall Probe (D-G) : -0.19924
    -----
    Right Arm Q1 momentum : 0.00644221
    Right Arm Q1 power supply : 1.38857
    Right Arm Q1 gauss meter : -0.0001415
    Right Arm Q2 power supply current : 0.00328698
    Right Arm Q2 momentum : 0.000765933
    Right Arm Q2 gauss meter : 0.0001533
    Right Arm Q2 power supply polarity : enabled
    Right Arm D1 power supply current : 1.90437
    Right Arm D1 momentum : 0.00766904
    Right Arm D1 NMR : 0.166114
    Right Arm Q3 power supply current : -0.000194288
    Right Arm Q3 momentum : -4.0345e-07
    Right Arm Q3 gauss meter : 0.0002598
    Right Arm Q3 power supply polarity : enabled
    Right Arm B Field Hall Probe (D-G) : -0.002809
    -----
    Left Arm Top VDC Current : 4.49219
    Left Arm Bottom VDC Current : 3.41797
    Left Arm Top VDC voltage : 3.50586
    Left Arm Bottom VDC voltage : 3.49854
    -----
    Right Arm Top VDC Current : -1.85547
    Right Arm Bottom VDC Current : -1.46484
    Right Arm Top VDC voltage : -0.00732422
    Right Arm Bottom VDC voltage : -0.00830078
    -----
    Average current of the two cavities : 2.16834
    Current on Unser monitor : 24.5592
    Current on Upstream bcm : 2.29163
    Current on Downstream bcm : 2.04504
    Upstream Cavity Coefficient : 52.95
    Downstream Cavity Coefficient : 44.77
    Current on IBC0L02 (source) : 2.4034
    Hall C Current : 0
    Hall A momentum (Tiefenbach) (HALLA:p) : 1160.96
    Hall A momentum orbit correction (dpp) : -8.18979e-06
    Hall A setup momentum (MMSHLAE) : 1161.88
    Hall A energy (halla_MeV) : 1160.96
    Hall C energy (hallc_MeV) : 2257.17
    Delta(E)/E width (MV_AI_DXWID) : 5.67912
    MBSY1c magnet current (amp) : 48.1354
    MBSY1c Bdl : 289952
    Arc1 dp/p : 0
    Arc2 dp/p : 0
    Raster X width : 1
    Raster Y width : 5
    -----
    HacL_HPE1313A:0_Ch58 : -0.304688
    HacL_HPE1313A:0_Ch55 : 22.9004
    HacL_HPE1313A:0_Ch54 : -0.0366211
    Left Arm Angle Floor Angle : 0
    Left Arm Angle Vernier : 0
    Left Arm Scattering Angle : -0.179
    -----
    Right Arm D1 momentum : 0.00765541
    Right Arm arm angle : 0.197
    -----
    Left VDC -DISC LVL Top : -0.0078125
    Left VDC -DISC LVL Bottom : -0.000976562
    Left VDC -DISC LVL Voltage1 : -0.00683594
    Left VDC -DISC LVL Voltage2 : -0.00439453
    -----
    Right Arm Arm Collimator : -0.00864258
    HacR_HPE1313A:0_Ch58 : -0.712402
    HacR_HPE1313A:0_Ch55 : 21.8262
    HacR_HPE1313A:0_Ch54 : -1.03955
    Right Arm Angle Floor Angle : 0
    Right Arm Angle Vernier : 0
    Right Arm Scattering Angle : 0.197
    -----
    IPM1C12.XPOS : 0.00581178
    IPM1C12.YPOS : -0.0217122
    IPM1H04A.XPOS : 0.227409
    IPM1H04A.YPOS : -0.324972
    IPM1H04B.XPOS : 0.00450182
    IPM1H04B.YPOS : 0.594244
    Survey X offset bpmA : 0.24
    Survey Y offset bpmA : 0.36
    Survey X offset bpmB : 0.77
    Survey Y offset bpmB : 1
    -----
    Wien angle (Vertical) : 88.8235
    Wien Vertical BDL (Gcm) : 2147.9
    Wien HV Polarity : OFF
    Wien electrode Voltage : 55.48
    Wien angle (Solenoids) : -89.7547
    Wien BDL (First Solenoid) (Gcm) : -876
    Wien BDL (Second Solenoid) (Gcm) : -857
    Wien angle (Horizontal) : -51.9996
    Wien BDL (Gcm) : -1198.62
    Wien HV Polarity (Horizontal) : ON
    Wien electrode Voltage (Horizontal) : 32.828
    Laser attenuation Hall A : 75
    Laser power Hall A : 100
    Half-wave plate (off=out) : IN
    rotating waveplate : 2000
    Beam Half-wave plate (off=out) : IN
    -----
    Helicity Delay Set : 8 windows
    Helicity Pattern Set : Quartet
    Helicity Clock Set : Free Clock
    Helicity Settle Read : 60
    Helicity Stable Read : 1000
    Helicity Delay Read : 8 windows
    Helicity Pattern : Quartet
    Helicity Clock Read : Free Clock
    Helicity Frequency : 943.396
    -----
    Target : BeO Viewer
    fan frequency loop 1 : 0
    fan frequency loop 2 : 0
    fan frequency loop 3 : 0
    Encoder position : 2.21735e+07
    Target type : 2.21735e+07
    temperature loop 1(1) : 119.99
    temperature loop 1(2) : 119.99
    temperature loop 1(3) : 119.99
    Heat exchange loop 1 H2 : 115.3
    temperature loop 3(1) : 0
    temperature loop 3(2) : 0
    temperature loop 3(3) : 0
    Heat exchange loop 3 H2 : 278.9
    pressure loop He : 43.0844
    pressure loop H2 before : 15.903
    pressure loop H2 return : 14.9111
    HPH He loop 1 : 0.0970926
    HPH He loop 2 : 0.0118473
    HPH H2 loop 3 : 0.00293052
    Left Det/Scint/S0 HV
    Upper Quartz : -1500.7
    Lower Quartz : -1501.3
    A_T Quartz : -1497.3
    Upper Scint : -11.1
    Lower Scint : -21.3
    S0 A : -901.6
    S0 B : -901.9
    -----
    Det Encoder Position for PREX
    Left Main Det x : 0.0629883
    Left Main Det y : 0.0151367
    Right Main Det x : HacH_DTC_HPE1313A:0_Ch10 --- Invalid channel name
    Right Main Det y : 0.0151367
    -----
    PREX Septum
    Current Setpoint(Amps) : 384.045
    Current Readback(Amps) : 382.124
    -----
    # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Voltage
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MV
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
    # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Current
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MC
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
    # Map  usage:  Measured Voltage
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  usage:  Measured Current
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  HV_  Measured Voltage
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MV
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: 5555
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D HV_ -c GET -P MV
    # Map  HV_  Measured Current
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MC
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: 5555
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D HV_ -c GET -P MC
    # Map  HV_Port  Measured Voltage
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MV
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: 5555
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D HV_Port -c GET -P MV
    # Map  HV_Port  Measured Current
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MC
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: 5555
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D HV_Port -c GET -P MC
    # Map  'command_message'  Measured Voltage
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  'command_message'  Measured Current
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  Examples:  Measured Voltage
     *** Map name 1:,1:  is missing or not properly set in the server list :
    
    
    /adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe. 
    usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
    
      HV_ hostname - name(or IP address) of HV mainframe  
      HV_Port      - number of HV port for TCP/IP connetction(1090 default) 
      'command_message' - message for sending to HV mainframe(string with quotas)
    
    Examples: 
     Send command to HV mainframe 'hallahv1':
              /adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090  -m 'LD L0.1 DV -1000.' 
     Send command to control program running on 'adaqel1'
     for setup voltage on HVframe 0:
              /adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555  -m '0 LD L0.1 DV -1000.' 
     Error(2) in information retrieval in  -D Examples: -c GET -P MV
    # Map  Examples:  Measured Current
     *** Map name 1:,1:  is missing or not properly set in the server list :
    
    
    /adaqfs/home/a-onl/slowc/hvg/hvcli - program to communicate with HV mainframe. 
    usage: /adaqfs/home/a-onl/slowc/hvg/hvcli -h {HV_hostname} -p {HV_Port} -m {'command_ message'}
    
      HV_ hostname - name(or IP address) of HV mainframe  
      HV_Port      - number of HV port for TCP/IP connetction(1090 default) 
      'command_message' - message for sending to HV mainframe(string with quotas)
    
    Examples: 
     Send command to HV mainframe 'hallahv1':
              /adaqfs/home/a-onl/slowc/hvg/hvcli -h hallahv1 -p 1090  -m 'LD L0.1 DV -1000.' 
     Send command to control program running on 'adaqel1'
     for setup voltage on HVframe 0:
              /adaqfs/home/a-onl/slowc/hvg/hvcli -h adaqel1 -p 5555  -m '0 LD L0.1 DV -1000.' 
     Error(2) in information retrieval in  -D Examples: -c GET -P MC
    # Map  Send  Measured Voltage
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  Send  Measured Current
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Voltage
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MV
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
    # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Current
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MC
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
    # Map  Send  Measured Voltage
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  Send  Measured Current
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  for  Measured Voltage
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  for  Measured Current
         0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0     99      0      0      0      0      0      0      0      0      0      0      0      0      0      0      0    104      0      0      0      0   1090      0     76      0      0      0      0      0      0      0      0      0      0     97      0      0      0      0      0      0      0      0      0      0   5555      0     48      0      0      0      0 # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Voltage
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MV
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MV
    # Map  /adaqfs/home/a-onl/slowc/hvg/hvcli  Measured Current
     hv_proc.com - a script to get HV parameters from the "hvs" server
     Call parameters:
     hv_proc.com -D detec [-c command] -m range [-c command] [-P parameter-to-get] [-H host] [-p port] ....
        where:
               -c command (GET or SET or MAPS)                      default: GET
                  MAPS: just prints the maps names 
                 (-D should be defined, the other parameters are ignored)
               -P parameter to use : DV, MV, MC, CE                 default: MC
                  for -c SET the valid parameters are DV, CE
               -D detector maps (NA_ND, NA_VT, BB_SH, BB_PS, BB_SC) default: none
                  NA: NA_ND_L / NA_ND_R / NA_VT_L / NA_VT_R
                  BB: BB_PS / BB_PS_L /BB_PS_R / BB_SC
               -m colums,rows range, ex: 3,17 or 2:13,7:9           default: none                  
               -v  value to SET (used if no -f declared)            default: none
               -f  file name containing lines with "ix iy value"    default: none
               -t  test only                                        default: none
               -H host name where the server is running             default: none
                  (if none -  for NA and  for BB)
               -p port number                                       default: rogram
               -b client program                                    default: /adaqfs/home/a-onl/slowc/hvg/hvcli
               -? or ? or -h  print this help                       default: none
     Example: hv_proc.com -c GET -P MV -D NA_ND_L -m 1:4,2:26  
     Example: hv_proc.com -c GET -P MC -D BB_SH -m 1:7,1:27  
     Example: hv_proc.com -c MAPS -P MC -D NA_VT_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P DV -v -1200 -D NA_ND_L -m 1:7,1:27  
     Example: hv_proc.com -c SET -P CE -v 1 -D NA_ND_L -m 1:7,1:27  
     Error(2) in information retrieval in  -D /adaqfs/home/a-onl/slowc/hvg/hvcli -c GET -P MC
    CODA config : config LeftHrs LeftNoGem
    HAPPEX run : 4816