NEXT
Make New Entry,
Make Followup Entry
User name A. Camsonne
Log entry time 17:33:01 on September 04, 2010
Entry number 332045
keyword=DVCS DC current ADC setup
The ADCs were set to differential ( Jumpers on R1 to R32 and no J1 and J2
jumpers )
The board to panel correspondance :
First ADC2 VME adress 0x2
Second ADC3 VME address 0x3
Third ADC 4 VME address 0x7
Fourth ADC1 VME address 0x9
On the calorimeter panel, the display is in the same order as ADCs, 64
channels of ADC1, then 64 channels of ADC2 and so on.
Quickly tested with a 1.5 V battery it seems most channels are ok ( we
did not test channel 32 since the last pin can have some different
grounding) and calibration seems good too with 1.4 V read back.