* All the HV for dE and E planes are on.
* The ADC spectrum are good for both dE and E sets.
The missing ADC spectrum in dE-15R, 17R and 18R are because of the connection were not connected in between.
* The HV for the MWDC is slowly turned up. No large drawing of the current == no broken wires (I guess).
* The MWDC hit.wire have missing sections. Found the problems. ** The weight of the cables are pulling them down from the TDC in roc9 [putting the cable tiles to support the weight into three layers.see roc9] ** Switch out the cables from BigBite PP to LT (PP7-2, PP7-9 PP9-11 PP8-11) ** the problems are not yet fixed.
some missing just appear and disappear from times to times. I guess I need a better method to deal with this.
Tai