Log entry time 20:57:44 on February 04, 2011

Entry number 346070

Followups:

• 346086 02/05/11 19:54 V. Sulkosky HAND Trigger connected to TS

I connected T1, T2 and T8 from the right arm to the weldment via the
 320ns RG-58 cables.  Eventually T1 and T2 will be moved to RG-8 cables 
once those are available.  After arriving at the weldment patch panel, I 
placed these triggers into a PS 707 discriminator to reshape the 
signals.  These signals were then connected to a level translater and 
are then sent to the BigBite trigger supervisor.  I will need to test to
 make sure the TS sees these correctly.

David also sent a copy of T3 and T4 from the left HRS to the weldment via
the RG-8 cables to the weldment patch panel.  I connected these the same 
way as the right arm triggers.  However the HV on the left arm was off, 
so I was unable to verify the signals on a scope.

Eventually I will have to delay T3/T1 appropriately to form the 
coincidence trigger T5.