• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT
    Make New Entry, Make Followup Entry

    User name adaq

    Log entry time 00:16:23 on March 5, 2015

    Entry number 405506

    keyword=End_of_Run_10872
    ****************************
     Run Number: 10872
     End of Run Comment:
    Run_type=Other,target_type=Home(no target, or empty),comment_text=Test fastbus
     
    
    PRESCALE FACTORS:ps1=1   ps2=0   ps3=0   ps4=0   ps5=0   ps6=0   ps7=0   ps8=0   ps9=0   ps10=0   ps11=0   ps12=0   
    
    EVENTS   : 22894        
    
    TIME     : 36.663 mins  
    
    DEAD TIME: -98.82%      
    
    TRIGGER RATES:   PRES/REAL
    T1:T1: 5.2/5.2  Hz   T2:T2: 0.0/3.0  Hz   T3:T3: 0.0/6.0  Hz   T4:T4: 0.0/79.5 Hz   T5:T5: 0.0/157.4 Hz   T6:T6: 0.0/4745.7 Hz   T7:T7: 0.0/0.0  Hz   T8:T8: 0.0/103700.0 Hz   
    
    TRIGGER TOTALS:   PRES/REAL
    T1:T1:  11516/11516    T2:T2:      0/6644     T3:T3:      0/13281    T4:T4:      0/174954   T5:T5:      0/346332   T6:T6:      0/10439626  T7:T7:      0/0        T8:T8:      0/228119932  
    
    AVERAGE CURRENT
    BCM 1 : -0.0342uA  
    
    APPROXIMATE BCM CHARGES (C)
    BCM u1 : -92            
    BCM d1 : -58.55         
    
    
    ****************************
    End-of-run EPICS data for Run Number 10872 at Thu Mar 5 00:15:57 EST 2015
    
    

    Right and Left MLU settings

    Current on Downstream bcm : 104 Left MLU settings Upstream Cavity Coefficient : 1 0 0xffff Downstream Cavity Coefficient : 1 time of Left HRS MLU last setting 2 at 12:30 Upstream Pedestal : 0 Downstream Pedestal : 0 Right MLU settings Raw Upstream Signal : 123 0 0xffff Raw Downstream Signal : 104 time of Right HRS MLU last setting 2 at 12:30 MBSY1c magnet current (amp) : 2 MBSY1c Bdl : 2.59461e+06 Hall A momentum (Tiefenbach) (HALLA:p) : 10375.6 The meaning of the settings is documented elsewhere; briefly: Hall A momentum orbit correction (dpp) : 0 first number is 0 or 1 Hall A setup momentum (MMSHLAE) : 9607.2 0 = standard GMp trigger Hall A energy (halla_MeV) : 0 1 = single detector trigger second number is a bit mask Delta(E)/E width (MV_AI_DXWID) : 4.34004 bit=1 means output is enabled IPM1C12.XPOS : 0 bit=0 means output is disabled IPM1H04A.XPOS : 0 only last 8 bits are relevant for NIM output IPM1H04A.YPOS : 0 IPM1H04D.XPOS : 0 IPM1H04D.YPOS : 0

    General Run Info

    ----- Beam energy (MeV) : 10375.6 Wien angle (Vertical) : 45.4007 Beam Current : 44 ------ Injector Measured Energy : 106.734 Wien Vertical BDL (Gcm) : 1312.9 Wien HV Polarity : POSITIVE Wien electrode Voltage : 0 Wien angle (Solenoids) : 88.1178 Average North Linac Measured Energy : 952.555333333333333 Wien BDL (First Solenoid) (Gcm) : 978 Wien BDL (Second Solenoid) (Gcm) : 978 Wien angle (Horizontal) : 0 Wien BDL (Gcm) : 0 Average South Linac Measured Energy : 948.996666666666667 ------ Wien HV Polarity (Horizontal) : POSITIVE Left arm angle : -0.179 Wien electrode Voltage (Horizontal) : 0 Left arm momentum : 1.00001 Laser attenuation Hall A : 90 Right arm angle : 0.197 Laser power Hall A : 0 Right arm momentum : 1.00002 Rotating waveplate : 0 ------ Fake Half-Wave Plate (8960=OUT) : 8960 Fast Raster Ix : 0 Beam Half-wave plate (off=out) : OUT Fast Raster Iy : 0 ----- ------ Helicity Delay Set : No Delay Hall A momentum (Tiefenbach) (HALLA:p) : 10375.6 Helicity Pattern Set : Quartet Hall A momentum orbit correction (dpp) : 0 Helicity Clock Set : Free Clock Hall A setup momentum (MMSHLAE) : 9607.2 Helicity Settle Read : 500 Hall A energy (halla_MeV) : 0 Helicity Stable Read : 33330 ------ Helicity Delay Read : No Delay MBSY1c magnet current (amp) : 2 Helicity Pattern : Quartet MBSY1c Bdl : 2.59461e+06

    Misc Epics Info

    Helicity Clock Read : Free Clock Left Arm Q1 momentum : 1.00022 Helicity Frequency : 29.5596 Left Arm Q1 power supply : 752.499

    Target Info

    ----- Left Arm Q1 gauss meter : -0.06248 Target : Loop 1 Left Arm Q2 power supply current : 430.646 Left Arm Q2 momentum : 1.00011 fan frequency loop 1 : 0 Left Arm Q2 gauss meter : 0.22687 fan frequency loop 2 : 0 fan frequency loop 3 : 0 Left Arm Q2 power supply polarity : disabled Left Arm D1 power supply current : 331.8 Encoder position : -1 Left Arm D1 momentum : 1.00001 Target type : -1 Left Arm D1 NMR : 0.370233 temperature loop 1(1) : 294.31 Left Arm Q3 power supply current : 398.153 temperature loop 1(2) : 294.5 Left Arm Q3 momentum : 1.00008 temperature loop 1(3) : 294.16 Left Arm Q3 gauss meter : -0.200813 Heat exchange loop 1 H2 : 293.59 temperature loop 2(1) : 294.24 Left Arm Q3 power supply polarity : disabled temperature loop 2(2) : 294.44 Left Arm B Field Hall Probe (D-G) : -0.3569 temperature loop 2(3) : 294.35 ----- Heat exchange loop 2 LH2 : 293.38 Average current of the two cavities : 114 temperature loop 3(1) : 296.33 Current on Upstream bcm : 45 temperature loop 3(2) : 295.61 Current on Downstream bcm : 183 temperature loop 3(3) : 296.67 Upstream Cavity Coefficient : 1 Heat exchange loop 3 H2 : 295.04 Downstream Cavity Coefficient : 1 pressure loop H2 before : 41.7608 Upstream Pedestal : 0 pressure loop H2 return : 42.0279 Downstream Pedestal : 0 pressure loop H2 before : 42.5604 Raw Upstream Signal : 45 pressure loop H2 return : 42.2476 Raw Downstream Signal : 183 HPH loop 1 : 4.46944 HPH loop 2 : 2.12357 MBSY1c magnet current (amp) : 2 HPH loop 3 : 2.27082 MBSY1c Bdl : 2.59461e+06

    DVCS Calorimeter

    Measured HV voltages Hall A momentum (Tiefenbach) (HALLA:p) : 10375.6 Hall A momentum orbit correction (dpp) : 0 Hall A setup momentum (MMSHLAE) : 9607.2 Hall A energy (halla_MeV) : 0 Delta(E)/E width (MV_AI_DXWID) : 4.34004 IPM1C12.XPOS : 0 IPM1H04A.XPOS : 0 IPM1H04A.YPOS : 0 IPM1H04D.XPOS : 0 Measured HV currents IPM1H04D.YPOS : 0 ----- Wien angle (Vertical) : 45.4007 Wien Vertical BDL (Gcm) : 1312.9 Wien HV Polarity : POSITIVE Wien electrode Voltage : 0 Wien angle (Solenoids) : 88.1178 Wien BDL (First Solenoid) (Gcm) : 978 Measured HV for DVCS Cosmic paddels Wien BDL (Second Solenoid) (Gcm) : 978 ------------------------------------------------------------------- DVCS Cosmic Padels TOP TOP1: ERROR:Hostname of mainframe not found(hatsv17:2003) Wien angle (Horizontal) : 0 TOP2: ERROR:Hostname of mainframe not found(hatsv17:2003) Wien BDL (Gcm) : 0 DVCS Cosmic Padels BOTTOM BOTTOM1: ERROR:Hostname of mainframe not found(hatsv17:2003) BOTTOM2: Wien HV Polarity (Horizontal) : POSITIVE ERROR:Hostname of mainframe not found(hatsv17:2003) ------------------------------------------------------------------- Wien electrode Voltage (Horizontal) : 0 Measured anode currents: block number Laser attenuation Hall A : 90 Laser power Hall A : 0 Rotating waveplate : 0 Fake Half-Wave Plate (8960=OUT) : 8960 Beam Half-wave plate (off=out) : OUT ----- Helicity Delay Set : No Delay Helicity Pattern Set : Quartet Helicity Clock Set : Free Clock Helicity Settle Read : 500 Helicity Stable Read : 33330 Helicity Delay Read : No Delay Helicity Pattern : Quartet Helicity Clock Read : Free Clock Helicity Frequency : 29.5596

    Target Info

    ----- Target : Loop 1 fan frequency loop 1 : 0 fan frequency loop 2 : 0 fan frequency loop 3 : 0 Encoder position : -1 Target type : -1 temperature loop 1(1) : 294.31 temperature loop 1(2) : 294.47 temperature loop 1(3) : 294.21 Heat exchange loop 1 H2 : 293.69 temperature loop 2(1) : 294.16 temperature loop 2(2) : 294.4 temperature loop 2(3) : 294.28 Heat exchange loop 2 LH2 : 293.38 temperature loop 3(1) : 296.33 temperature loop 3(2) : 295.56 temperature loop 3(3) : 296.57 Heat exchange loop 3 H2 : 295 pressure loop H2 before : 41.6769 pressure loop H2 return : 41.9989 pressure loop H2 before : 42.565 pressure loop H2 return : 42.2033 HPH loop 1 : 4.41739 HPH loop 2 : 2.17663 HPH loop 3 : 2.29557

    DVCS Calorimeter

    Measured HV voltages Measured HV currents Measured HV for DVCS Cosmic paddels ------------------------------------------------------------------- DVCS Cosmic Padels TOP TOP1: ERROR:Hostname of mainframe not found(hatsv17:2003) TOP2: ERROR:Hostname of mainframe not found(hatsv17:2003) DVCS Cosmic Padels BOTTOM BOTTOM1: ERROR:Hostname of mainframe not found(hatsv17:2003) BOTTOM2: ERROR:Hostname of mainframe not found(hatsv17:2003) ------------------------------------------------------------------- Measured anode currents: block number iochacs (129.57.242.13) needs to be reboot Please see DVCS HOW-TO wiki for reboot IOC

    LHRS Detector High Voltage and Current

    S0 A B HV (V) -1225 -1125 I (uA) -305 -524 S2m 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L HV (V) -1590 -1520 -1850 -1760 -1735 -1625 -1720 -1660 -1710 -1810 -1805 -1740 -1725 -1795 -1590 -1455 I (uA) -604 -576 -704 -669 -660 -619 -652 -631 -648 -686 -686 -662 -655 -682 -602 -552 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R HV (V) -1535 -1655 -1780 -1685 -1785 -1750 -1780 -1875 -1910 -1795 -1800 -1540 -1565 -1705 -1735 -1625 I (uA) -582 -629 -678 -644 -679 -666 -674 -713 -732 -681 -682 -583 -593 -646 -660 -617 Cherenkov 1 2 3 4 5 6 7 8 9 10 HV (V) -1170 -1010 -1125 -1005 -1030 -1120 -935 -975 -1000 -1175 I (uA) -395 -322 -392 -336 -340 -375 -309 -310 -324 -407 PRL1 1L 2L 3L 4L 5L 6L 7L 8L 9L 10L 11L 12L 13L 14L 15L 16L 17L HV (V) -729 -669 -754 -759 -645 -729 -871 -831 -689 -663 -722 -669 -736 -750 -630 -735 -767 I (uA) -174 -159 -180 -181 -154 -173 -207 -198 -163 -157 -172 -159 -175 -179 -150 -176 -183 1R 2R 3R 4R 5R 6R 7R 8R 9R 10R 11R 12R 13R 14R 15R 16R 17R HV (V) -678 -672 -734 -1058 -851 -906 -707 -898 -741 -761 -621 -750 -669 -667 -716 -646 -713 I (uA) -167 -166 -168 -230 -204 -221 -174 -219 -180 -186 -151 -183 -162 -162 -175 -157 -174 PRL2 18L 19L 20L 21L 22L 23L 24L 25L 26L 27L 28L 29L 30L 31L 32L 33L 34L HV (V) -713 -733 -654 -711 -659 -739 -690 -706 -682 -628 -681 -654 -605 -647 -661 -703 -759 I (uA) -169 -175 -156 -169 -157 -175 -164 -168 -162 -151 -162 -156 -144 -154 -158 -167 -181 18R 19R 20R 21R 22R 23R 24R 25R 26R 27R 28R 29R 30R 31R 32R 33R 34R HV (V) -649 -643 -660 -612 -576 -716 -652 -788 -729 -692 -827 -824 -654 -712 -789 -741 -714 I (uA) -154 -154 -158 -146 -138 -171 -155 -188 -174 -165 -197 -197 -161 -175 -191 -174 -170 VDC 1 2 HV (V) -3500 -3500 I (uA) -0 -0 Straw Chamber 1 2 3 4 5 6 HV (V) iochacs (129.57.242.13) needs to be reboot Please see DVCS HOW-TO wiki for reboot IOC

    LHRS Detector High Voltage and Current

    S0 A B HV (V) 1800 1800 1800 1800 1800 1800 I (uA) -1225 -1125 I (uA) 2 4 4 2 2 2