0800 | 0900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0 | 0 | 0 | 0.25 | 0.6 | 0.9 | 0.85 | 0.9 | 3.5 |
Beam Available but Not in Use | 1 | 1 | 1 | 0.75 | 0.3 | 0 | 0 | 0 | 4.05 |
Beam Not Available or Unacceptable | 0 | 0 | 0 | 0 | 0.1 | 0.1 | 0.15 | 0.1 | 0.45 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 0 | 0 | 0 | 0.25 | 0.7 | 1 | 1 | 1 | 3.95 |
Planned Config- uration Change | 0.7 | 1 | 1 | 0.2 | 0 | 0 | 0 | 0 | 2.9 |
Unplanned Experiment Down | 0.3 | 0 | 0 | 0.55 | 0.3 | 0 | 0 | 0 | 1.15 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: 08:05-08:25 Beam off for gp>pi0p test. Test aborted. 08:30-11:00 Set up for Q2=5.6. 11:00-11:25 12C pointing test and HARP scan. 11:25-12:20 Re-enter hall to check calorimeter electronics. 12:20 Begin Q2=5.6 data taking.
Data Entry by: Huber