1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0 | 0 | 0 | 0 | 0 | 5 | 1 | 40 | 1.75 |
Beam Available but Not in Use | 0 | 0 | 0 | 0 | 0 | 10 | 0 | 20 | 0.5 |
Beam Not Available or Unacceptable | 1 | 1 | 1 | 1 | 1 | 45 | 0 | 0 | 5.75 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 1 | 0 | 0 | 0 | 0 | 50 | 1 | 40 | 3.5 |
Planned Config- uration Change | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Unplanned Experiment Down | 0 | 1 | 1 | 1 | 1 | 10 | 0 | 20 | 4.5 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: asked for controlled access to take a look at the reference cell, mark the center of BeO target, work on the raster At then end of this shift, work on the profile of the beam
Data Entry by: Lingyan Zhu