1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 40 | 39.2 | 53.9 | 48.6 | 54.8 | 15 | 53.9 | 57.7 | 6.05166666666667 |
Beam Available but Not in Use | 20 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.333333333333333 |
Beam Not Available or Unacceptable | 0 | 20.8 | 6.1 | 11.4 | 5.2 | 45 | 6.1 | 2.3 | 1.615 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 40 | 1 | 1 | 1 | 1 | 15 | 1 | 1 | 6.91666666666667 |
Planned Config- uration Change | 20 | 0 | 0 | 0 | 0 | 45 | 0 | 0 | 1.08333333333333 |
Unplanned Experiment Down | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Hall not ready reasons | |||||||||
Target | 20 | 0 | 0 | 0 | 0 | 20 | 0 | 0 | 0.666666666666667 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: At 21:00, beam was turned off so that Hall C could do BCM calibration. We also did the target polarization measurements during this time. Pulser runs were also taken.
Data Entry by: Kaufman