1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 30 | 15 | 1 | 1 | 1 | 1 | 35 | 1 | 6.33333333333333 |
Beam Available but Not in Use | 30 | 45 | 0 | 0 | 0 | 0 | 25 | 0 | 1.66666666666667 |
Beam Not Available or Unacceptable | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 30 | 15 | 1 | 1 | 1 | 1 | 35 | 1 | 6.33333333333333 |
Planned Config- uration Change | 30 | 45 | 0 | 0 | 0 | 0 | 25 | 0 | 1.66666666666667 |
Unplanned Experiment Down | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: 16:00: taking data on reference cell 16:05 9 Atm He in ref cell 16:30: request access to close He3 value on reference cell 17:45 beam back- short run on BeO/C12 target with beam centered at (0,0) 17:50 moving to polarized He3 cell start at 2uA 18:00 first run with target cell shapiro 18:30 raise beam current to 10uA-production running mode on pol He3 cell 19:15 insert 6mstr collimators- continue production running pol He3 lamda/2 plate out 22:15 complete lamba/2=out measurement 22:15 begin ep measurement-beam off for calibrations 22:30 complete target polatization measurements 22:32 request beam lambda/2 plate change to IN position after consulting with halls B and C 22:40 resume data taking with lambda/2 plate in IN position epr polarization is 48%
Data Entry by: Mike Finn