1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0 | 0 | 27 | 52 | 52 | 51 | 32 | 12 | 3.76666666666667 |
Beam Available but Not in Use | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Beam Not Available or Unacceptable | 60 | 60 | 33 | 8 | 8 | 9 | 28 | 48 | 4.23333333333333 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 1 | 50 | 37 | 1 | 1 | 1 | 43 | 47 | 6.95 |
Planned Config- uration Change | 0 | 10 | 23 | 0 | 0 | 0 | 17 | 13 | 1.05 |
Unplanned Experiment Down | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: 16:00 Accel still in recovery from RF zone drop out 17:33 beam is back, resume production running, beam quickly drops out again 17:50 since beam is off, we are taking opportunity to do a target polarization measurement 18:23 finish target polarization measurement, obtain 38.5% in transverse mode 18:25 beam back 22:43 beam masked for target pol measurement 23:13 finish polarization measurement 23:13 finish polarization measurement- beam problems due to passing Thunderstorm 23:34 beam restored-resume data taking
Data Entry by: M. Finn