Log entry time 09:36:32 on December 1, 2001

Entry number 78489

****************************
 Run Number: 2736
 End of Run Comment:
Run_type=production,beam_energy=4.627,beam_raster=off,comment_text=I- Production , ps=5200,212,2460,268,1,daq_mode=both HRS daq,leftarm_p=4.121,leftarm_theta=12.500,rightarm_p=1.066,rightarm_theta=28.269,target_name=H2O,target_type=Waterfall
 

syntax error in expression "823439/65535Right Arm Q1 power supply current : 801.605"
    while executing
"expr $scal($map(trigger-$t,$h))/$ps($t)  "
    invoked from within
"set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/$ps($t)  ]..."
    ("foreach" body line 3)
    invoked from within
"foreach t $scalerinfo(triglist) { 
	    set  trigger_real($t,$h)   [ expr $scal($map(trigger-$t,$h))          ]
	    set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/$ps($t)  ]
	    set  trigtot($h)           [ expr $trigtot($h) + $trigger($t,$h)      ]
	}"
    ("foreach" body line 4)
    invoked from within
"foreach h { 1 0 -1 } {
	set trigtot($h)      0
	set acc_trigtot($h) 0 
	foreach t $scalerinfo(triglist) { 
	    set  trigger_real($t,$h)   [ expr $scal($map(trigger-$t,$h))          ]
	    set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/$ps($t)  ]
	    set  trigtot($h)           [ expr $trigtot($h) + $trigger($t,$h)      ]
	}
	set trigacc($h)  $scal($map(TS-accept,$h))
	set clock($h)    $scal($map(clock,$h))    
	
	set hvf(u1,$h)  $scal($map(bcm_u1,$h))
	set hvf(u3,$h)  $scal($map(bcm_u3,$h))
	set hvf(u10,$h) $scal($map(bcm_u10,$h))
	set hvf(d1,$h)  $scal($map(bcm_d1,$h))
	set hvf(d3,$h)  $scal($map(bcm_d3,$h))
	set hvf(d10,$h) $scal($map(bcm_d10,$h))
    }"
    (procedure "halla_scaler_process" line 81)
    invoked from within
"halla_scaler_process .mid.tex scalerinfo "

****************************
End-of-run EPICS data for Run Number 2736 at Sat Dec 1 09:09:54 EST 2001
Right Arm D1 momentum : 1.066
Right Arm arm angle : 28.269
Left Arm D1 momentum : 4.12098
Left Arm arm angle : 12.5004
Tiefenbach Hall A energy : 4617.9
Right Arm arm mispointing (HPT) : -0
Left Arm arm mispointing (HPT) : -0
Right Arm Top VDC Current : -15.8691
Right Arm Bottom VDC Current : -18.0176
Left Arm Top VDC Current : -6.78711
Left Arm Bottom VDC Current : -8.10547
Right Arm Q1 power supply current : 801.57
Right Arm Q1 momentum : 1.06601
Right Arm Q1 gauss meter : 0.020194
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : 458.76
Right Arm Q2 momentum : 1.06597
Right Arm Q2 gauss meter : -0.24139
Right Arm Q2 power supply polarity : disabled
Right Arm D1 power supply current : 365.635
Right Arm D1 momentum : 1.066
Right Arm D1 NMR : 0.39558
Right Arm Q3 power supply current : 424.21
Right Arm Q3 momentum : 1.06623
Right Arm Q3 gauss meter : -0.19002
Right Arm Q3 power supply polarity : enabled
Left Arm Q1 power supply current : 3100.58
Left Arm Q1 momentum : 4.12129
Left Arm Q1 gauss meter : -0.26185
Left Arm Q1 power supply polarity : 0
Left Arm Q2 power supply current : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 1774.49
Left Arm Q2 momentum : 4.12133
Left Arm Q2 gauss meter : 0.9337
Left Arm Q2 power supply polarity : 1
Left Arm D1 power supply current : 1567.31
Left Arm D1 momentum : 4.12098
Left Arm D1 NMR : 1.52679
Left Arm Q3 power supply current : 1640.63
Left Arm Q3 momentum : 4.1208
Left Arm Q3 gauss meter : -0.8207
Left Arm Q3 power supply polarity : 1
Average current of the two cavities : 54.3478
Current on Unser monitor : 61.7145
Current on Upstream bcm : 54.1235
Current on Downstream bcm : 54.5295
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) :
MBSY1c Hall A Beam energy :
MBSY1c magnet current (amp) : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 193.029
MBSY1c Bdl : 1.15476e+06
MBSY3c Hall C Beam energy :
Tiefenbach Hall A energy :
Tiefenbach Hall C energy :
Delta(E)/E width (MV_AI_DXWID) :
IPM1C12.XPOS :
IPM1H04A.XPOS :
IPM1H04A.YPOS :
IPM1H04B.XPOS : 0.0170546
IPM1H04B.YPOS :
Waterfall Step Motor Position : 7.67501e+06
Waterfall Pump Speed : 3589
Waterfall Flow Meter : 4.20277
Waterfall Tachometer : 1279.38
Waterfall Encoder : 1.72798
Right Arm Arm Collimator : 0.865283
Left Arm Arm Collimator : 0.868701
HacR_HPE1313A:0_Ch58 : -0.551758
HacR_HPE1313A:0_Ch55 : 21.7285
HacR_HPE1313A:0_Ch54 : -0.775391
HacR_alignROLL : -0.295295
HacR_alignPITCH : -0.00366688
HacR_alignHPT : -0
HacL_HPE1313A:0_Ch58 : -0.219238
HacL_HPE1313A:0_Ch55 : 23.4863
HacL_HPE1313A:0_Ch54 : 0.0625
HacL_alignROLL : 0.246879
HacL_alignPITCH : 0.0961679
HacL_alignHPT : -0
Right Arm Arm Collimator : 0.865234
Left Arm Arm Collimator : 0.868652
OTR x-position : 0.583632
OTR y-position : -0.263848
OTR x-width : 0.0885475
OTR y-width : 0.355889
OTR data valid flag : No
Waterfall Step Motor Position : 7.67501e+06
Waterfall Pump Speed : 3589
Waterfall Flow Meter : 4.15233
Waterfall Tachometer : 1269.47
Waterfall Encoder : 1.72828