Log entry time 20:26:06 on December 1, 2001

Entry number 78544

****************************
 Run Number: 2763
 End of Run Comment:
Run_type=production,beam_energy=4.627,beam_raster=off,comment_text=I- PRODUCTION ; ps = 5200,212,2460,268,1,daq_mode=both HRS daq,leftarm_p=4.121,leftarm_theta=12.500,rightarm_p=1.066,rightarm_theta=28.269,target_name=H2O,target_type=Waterfall
 

syntax error in expression "794957/65535Right Arm Q1 power supply current : 801.605"
    while executing
"expr $scal($map(trigger-$t,$h))/$ps($t)  "
    invoked from within
"set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/$ps($t)  ]..."
    ("foreach" body line 3)
    invoked from within
"foreach t $scalerinfo(triglist) { 
	    set  trigger_real($t,$h)   [ expr $scal($map(trigger-$t,$h))          ]
	    set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/$ps($t)  ]
	    set  trigtot($h)           [ expr $trigtot($h) + $trigger($t,$h)      ]
	}"
    ("foreach" body line 4)
    invoked from within
"foreach h { 1 0 -1 } {
	set trigtot($h)      0
	set acc_trigtot($h) 0 
	foreach t $scalerinfo(triglist) { 
	    set  trigger_real($t,$h)   [ expr $scal($map(trigger-$t,$h))          ]
	    set  trigger($t,$h)        [ expr $scal($map(trigger-$t,$h))/$ps($t)  ]
	    set  trigtot($h)           [ expr $trigtot($h) + $trigger($t,$h)      ]
	}
	set trigacc($h)  $scal($map(TS-accept,$h))
	set clock($h)    $scal($map(clock,$h))    
	
	set hvf(u1,$h)  $scal($map(bcm_u1,$h))
	set hvf(u3,$h)  $scal($map(bcm_u3,$h))
	set hvf(u10,$h) $scal($map(bcm_u10,$h))
	set hvf(d1,$h)  $scal($map(bcm_d1,$h))
	set hvf(d3,$h)  $scal($map(bcm_d3,$h))
	set hvf(d10,$h) $scal($map(bcm_d10,$h))
    }"
    (procedure "halla_scaler_process" line 81)
    invoked from within
"halla_scaler_process .mid.tex scalerinfo "

****************************
End-of-run EPICS data for Run Number 2763 at Sat Dec 1 20:24:32 EST 2001
Right Arm D1 momentum : 1.066
Right Arm arm angle : 28.269
Left Arm D1 momentum : 4.12097
Left Arm arm angle : 12.5004
Tiefenbach Hall A energy :
Right Arm arm mispointing (HPT) : -0
Left Arm arm mispointing (HPT) : -0
Right Arm Top VDC Current : -16.9434
Right Arm Bottom VDC Current : -15.8691
Left Arm Top VDC Current : -5.61523
Left Arm Bottom VDC Current : -12.207
Right Arm Q1 power supply current : 801.57
Right Arm Q1 momentum : 1.06601
Right Arm Q1 gauss meter : 0.02019
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : 458.683
Right Arm Q2 momentum :
Right Arm Q2 gauss meter : -0.24137
Right Arm Q2 power supply polarity : disabled
Right Arm D1 power supply current : 365.626
Right Arm D1 momentum : 1.066
Right Arm D1 NMR : 0.395579
Right Arm Q3 power supply current : 424.202
Right Arm Q3 momentum : 1.06655
Right Arm Q3 gauss meter : -0.19003
Right Arm Q3 power supply polarity : enabled
Left Arm Q1 power supply current : 3100.58
Left Arm Q1 momentum : 4.12129
Left Arm Q1 gauss meter : -0.26186
Left Arm Q1 power supply polarity : 0
Left Arm Q2 power supply current : 1774.56
Left Arm Q2 momentum : 4.12064
Left Arm Q2 gauss meter : 0.9337
Left Arm Q2 power supply polarity : 1
Left Arm D1 power supply current : 1567.31
Left Arm D1 momentum : 4.12097
Left Arm D1 NMR : 1.52679
Left Arm Q3 power supply current : 1640.65
Left Arm Q3 momentum : 4.12102
Left Arm Q3 gauss meter : -0.8207
Left Arm Q3 power supply polarity : 1
Average current of the two cavities : 53.8692
Current on Unser monitor : 61.1093
Current on Upstream bcm : 53.7392
Current on Downstream bcm : 54.0747
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) :
MBSY1c Hall A Beam energy :
MBSY1c magnet current (amp) :
MBSY1c Bdl :
MBSY3c Hall C Beam energy :
Tiefenbach Hall A energy :
Tiefenbach Hall C energy :
Delta(E)/E width (MV_AI_DXWID) :
IPM1C12.XPOS :
IPM1H04A.XPOS :
IPM1H04A.YPOS :
IPM1H04B.XPOS :
IPM1H04B.YPOS :
Waterfall Step Motor Position : 7.67501e+06
Waterfall Pump Speed : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 3566
Waterfall Flow Meter : 3.95429
Waterfall Tachometer : 1263.18
Waterfall Encoder : 1.72534
Right Arm Arm Collimator : 0.865283
Left Arm Arm Collimator : 0.86875
HacR_HPE1313A:0_Ch58 : -0.553223
HacR_HPE1313A:0_Ch55 : 21.5332
HacR_HPE1313A:0_Ch54 :
HacR_alignROLL : -0.297995
HacR_alignPITCH : -0.00205648
HacR_alignHPT : -0
HacL_HPE1313A:0_Ch58 : -0.221191
HacL_HPE1313A:0_Ch55 : 23.1934
HacL_HPE1313A:0_Ch54 : 0.0615234
HacL_alignROLL : 0.245094
HacL_alignPITCH : 0.0940567
HacL_alignHPT : -0
Right Arm Arm Collimator : 0.865283
Left Arm Arm Collimator : 0.868701
OTR x-position : 0.62523
OTR y-position : -0.235379
OTR x-width : 0.0864117
OTR y-width : 0.363982
OTR data valid flag : Yes
Waterfall Step Motor Position : 7.67501e+06
Waterfall Pump Speed : 3566
Waterfall Flow Meter : 3.9655
Waterfall Tachometer : 1285.42
Waterfall Encoder : 1.72534