1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0 | 0 | 15 | 55 | 50 | 0 | 10 | 50 | 3 |
Beam Available but Not in Use | 60 | 60 | 40 | 0 | 0 | 0 | 35 | 6.9 | 3.365 |
Beam Not Available or Unacceptable | 0 | 0 | 5 | 5 | 10 | 60 | 15 | 3.1 | 1.635 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 0 | 0 | 15 | 60 | 60 | 60 | 60 | 60 | 5.25 |
Planned Config- uration Change | 60 | 60 | 45 | 0 | 0 | 0 | 0 | 0 | 2.75 |
Unplanned Experiment Down | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Comments: requested 10 uA at 18.15. at 21.00 beam was taken away because the ion chambers in the hall were not working. Resolved - 20 uA is now the max current. Pedestal calibration runs.
Data Entry by: k. fissum