Log entry time 23:18:48 on February 20, 2002

Entry number 83301

keyword=Start_Run_2730,Run_type=production,beam_energy=3.481,beam_halfwaveplate=out,beam_polarization=0,beam_raster=on,comment_text=production run, magnet on, veto off,daq_mode=coincidence,leftarm_p=2.939,leftarm_theta=19.47,photonarm_D=5.7,photonarm_angle=65,photonarm_p=370,target_name=15R,target_type=15LH2R
Beginning-of-run EPICS data for Run Number 2730 at Wed Feb 20 23:18:32 EST 2002
; (Integer!) prescale factors for runs. 
; This file is read at start of every run.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; The default factor is essentially infinite. 
; ps8 = 65535 turns off the 1 kHz pulser on T8.
; Keep enough T2 and T4 to measure efficiency
; PS1 for the calorimeter singles based on summers
; PS2 for the cosmic trigger for calorimeter 
; PS3 for the Left spectrometer based on T3 - S1+S2
; PS4 for the Left spectrometer redundant trigger S1+S2 or
;                        based on S1+S0 or S2+S0
; PS5 for Coinc. trigger based on S0 and Calo
; PS6 for laser 
; PS7 for the Left spectrometer based on S0, timed with calorimeter
; PS8 for pulser 
ps1=50000,ps2=1000000,ps3=200,ps4=40,ps5=1,ps6=1,ps7=1000,ps8=1024 
Left Arm Q1 power supply current : 2211.09
Left Arm Q1 momentum : 2.93898
Left Arm Q1 gauss meter : 0.18755
Left Arm Q1 power supply polarity : 1
Left Arm Q2 power supply current : 1265.62
Left Arm Q2 momentum : 2.9392
Left Arm Q2 gauss meter : -0.6663
Left Arm Q2 power supply polarity : 0
Left Arm D1 power supply current : 1025.88
Left Arm D1 momentum : 2.939
Left Arm D1 NMR : 1.08821
Left Arm Q3 power supply current : 1170.2
Left Arm Q3 momentum : 2.93933
Left Arm Q3 gauss meter : 0.5858
Left Arm Q3 power supply polarity : 0
Left Arm Top VDC Current : 1.5625
Left Arm Bottom VDC Current : -2.34375
Average current of the two cavities : 15.0294
Current on Unser monitor : 22.094
Current on Upstream bcm : 14.9331
Current on Downstream bcm : 15.1257
Upstream Cavity Coefficient : 76.7
Downstream Cavity Coefficient : 78.9
Current on IBC0L02 (source) : 15.0505
Tiefenbach Hall A energy : 3477.94
Tiefenbach Hall C energy : 5750.79
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c Hall A Beam energy : CA.Client.Diagnostic.............................................. Message: "Ambiguous channel host (multiple IOC's have a channel by that name)" Severity: "Warning" Context: "Channel: MBSY1C_energy Accepted: 129.57.255.4 Rejected: iocsb4.acc.jlab.org " Source File: ../service.c Line Number: 897 .................................................................. 3483.85
MBSY3c Hall C Beam energy : CA.Client.Diagnostic.............................................. Message: "Ambiguous channel host (multiple IOC's have a channel by that name)" Severity: "Warning" Context: "Channel: MBSY3C_energy Accepted: iocsb4.acc.jlab.org Rejected: 129.57.255.4 " Source File: ../service.c Line Number: 897 .................................................................. 5770.09
MBSY1c magnet current (amp) : CA.Client.Diagnostic.............................................. Message: "Ambiguous channel host (multiple IOC's have a channel by that name)" Severity: "Warning" Context: "Channel: MBSY1C Accepted: iocsb4.acc.jlab.org Rejected: 129.57.255.4 " Source File: ../service.c Line Number: 897 .................................................................. 145.101
MBSY1c Bdl : CA.Client.Diagnostic.............................................. Message: "Ambiguous channel host (multiple IOC's have a channel by that name)" Severity: "Warning" Context: "Channel: MBSY1C.BDL Accepted: 129.57.255.4 Rejected: iocsb4.acc.jlab.org " Source File: ../service.c Line Number: 897 .................................................................. 869400
Arc1 dp/p : 5.77335e-05
Arc2 dp/p : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. -0.00164544
Left Arm Arm Collimator : 0.868506
HacL_HPE1313A:0_Ch58 : -0.114746
HacL_HPE1313A:0_Ch55 : 23.1934
HacL_HPE1313A:0_Ch54 : -0.0810547
HacL_alignROLL : 0.262207
HacL_alignPITCH : -0.163782
HacL_alignHPT : -0
Left Arm Angle Floor Angle : 19.5
Left Arm Angle Vernier : 25.8
Left Arm Scattering Angle : 19.4697
IPM1C12.XPOS : 0.391576
IPM1C12.YPOS : 0.03649
IPM1H04A.XPOS : 0.332176
IPM1H04A.YPOS : 0.398933
IPM1H04B.XPOS : 0.128431
IPM1H04B.YPOS : 1.6303
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77
Survey Y offset bpmB : -1
Wien angle : 60.4311
Helicity Mode ON/OFF Random/Toggle : OFF
Wien BDL : 1378.6
Wien field : 40.248
Laser attenuation Hall A : 285
Laser power Hall A : 71
Half-wave plate (off=out) : OUT
Beam Half-wave plate (off=out) : OUT
Target OTR x-position : 0.445936
Target OTR y-position : 2.11534
Target OTR x-width : 0.928769
Target OTR y-width : 0.976806
Target OTR data valid flag : No
Target OTR In/Out : MaxPix is Bad
Arc OTR x-position : 0.410146
Arc OTR y-position : -0.523565
Arc OTR x-width : 4.21515
Arc OTR y-width : 3.64327
Arc OTR data valid flag : No
Arc OTR In/Out : OTR is Out
Current Setpoint : 600
Current Readback : 600.391
User name a-onl

Log entry time 23:18:48 on February 20, 2002

Entry number 83301
