1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | Total Time | |
---|---|---|---|---|---|---|---|---|---|
Acceptable Beam in Use | 0 | 0 | 54 | 55 | 60 | 52 | 58 | 57 | 5.6 |
Beam Available but Not in Use | 60 | 60 | 0 | 0 | 0 | 0 | 0 | 0 | 2 |
Beam Not Available or Unacceptable | 0 | 0 | 6 | 5 | 0 | 8 | 2 | 3 | 0.4 |
Accelerator Con- figuration Chage | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Experiment Ready | 0 | 0 | 60 | 60 | 60 | 60 | 60 | 60 | 6 |
Planned Config- uration Change | 25 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0.416666666666667 |
Unplanned Experiment Down | 35 | 60 | 0 | 0 | 0 | 0 | 0 | 0 | 1.58333333333333 |
Hall not ready reasons | |||||||||
Target | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSe | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
HRSh | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Data Ac | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Other | 60 | 60 | 0 | 0 | 0 | 0 | 0 | 0 | 2 |
Comments: 16:00 Hall in controlled access to change calorimeter angle, replace an ADC card, and a HV crate. 18:03 Start Optics run, C foils, I=40 uA. 18:09 Q1 quenched. Lost about 1 hr of good beam. Beam was available and on target but we could not take data. 19:04 LH2-No R target in place, e-p calibration runs started.
Data Entry by: Khandaker