Log entry time 12:47:37 on July 2, 2002

Entry number 87106

Beginning-of-run EPICS data for Run Number 1935 at Tue Jul 2 12:46:59 EDT 2002
; (Integer!) prescale factors for runs. 
; This file is read at start of every run.
; Do NOT put spaces in string, NOR add 2nd string. (REALLY!!!)
; The default factor is essentially infinite. 
; ps8 = 65535 turns off the 1 kHz pulser on T8.
; Keep enough T2 and T4 to measure efficiency
; PS1 for the Right spectrometer based on T1 defined by S1*S2
; PS2 for the Right spectrometer based on T2 defined by S1+S2
; PS3 for the Left spectrometer based on T3 defined by S1*S2
; PS4 for the Left spectrometer redundant trigger T4 S1*S0+S2*S0
; PS5 for coincidence of T1 and T3.
; PS7 irrelevant
; PS8 for pulser 
ps1=1,ps2=9999,ps3=1,ps4=9999,ps5=1,ps6=65535,ps7=65535,ps8=65535







 
Left Arm Q1 power supply current : 0
Left Arm Q1 momentum : 0
Left Arm Q1 gauss meter : 9.82e-05
Left Arm Q1 power supply polarity : 0
Left Arm Q2 power supply current : 0.347514
Left Arm Q2 momentum : 0.000807046
Left Arm Q2 gauss meter : 0.0011046
Left Arm Q2 power supply polarity : 1
Left Arm D1 power supply current : 1.0885
Left Arm D1 momentum : 0
Left Arm D1 NMR : 0.481107
Left Arm Q3 power supply current : 2.13071
Left Arm Q3 momentum : 0.00535194
Left Arm Q3 gauss meter : -9.88e-05
Left Arm Q3 power supply polarity : 1
Right Arm Q1 power supply current : 0
Right Arm Q1 momentum : 0
Right Arm Q1 gauss meter : 0.0001228
Right Arm Q1 power supply polarity : 1
Right Arm Q2 power supply current : 0.205443
Right Arm Q2 momentum : 0.000477367
Right Arm Q2 gauss meter : -0.0011953
Right Arm Q2 power supply polarity : disabled
Right Arm D1 power supply current : 1.9887
Right Arm D1 momentum : 0
Right Arm D1 NMR : 0.184261
Right Arm Q3 power supply current : 0.299739
Right Arm Q3 momentum : 0.000753285
Right Arm Q3 gauss meter : -0.0007978
Right Arm Q3 power supply polarity : enabled
Left Arm Top VDC Current : 0.390625
Left Arm Bottom VDC Current : 0.341797
Right Arm Top VDC Current :
Right Arm Bottom VDC Current :
Average current of the two cavities : 0.0357281
Current on Unser monitor : 4.54665
Current on Upstream bcm : 0.0412526
Current on Downstream bcm : 0.0302036
Upstream Cavity Coefficient : 77.4
Downstream Cavity Coefficient : 79.06
Current on IBC0L02 (source) : 0.00143682
Tiefenbach Hall A energy : 4705.64
Tiefenbach Hall C energy : 4705.71
Delta(E)/E width (MV_AI_DXWID) : 0
MBSY1c Hall A Beam energy : 4715.32
MBSY3c Hall C Beam energy : 4720.11
MBSY1c magnet current (amp) : 0.0377197
MBSY1c Bdl : 1.17671e+06
Arc1 dp/p : 0
Arc2 dp/p : 0
Left Arm Arm Collimator : 0.870117
Left LVDT HPM : 1182
Left LVDT VPM : 579
HacL_HPE1313A:0_Ch58 : -0.173828
HacL_HPE1313A:0_Ch55 : 25.293
HacL_HPE1313A:0_Ch54 : 0.0107422
HacL_alignROLL : 0.353926
HacL_alignPITCH : -0.112873
HacL_alignHPT : -0
Left Arm Angle Floor Angle : 16
Left Arm Angle Vernier : 49
Left Arm Scattering Angle : 16.1034
Right Arm Arm Collimator : 0.862256
Right LVDT HPM : -3994
Right LVDT VPM : 586
HacR_HPE1313A:0_Ch58 : -0.51416
HacR_HPE1313A:0_Ch55 : 24.1211
HacR_HPE1313A:0_Ch54 : -0.928223
HacR_alignROLL : 0.466989
HacR_alignPITCH : -0.489172
HacR_alignHPT : -0
Right Arm Angle Floor Angle : 45
Right Arm Angle Vernier : -34
Right Arm Scattering Angle : 45.001
IPM1C12.XPOS : 0
IPM1C12.YPOS : 0
IPM1H04A.XPOS : 0
IPM1H04A.YPOS : 0
IPM1H04B.XPOS : 0
IPM1H04B.YPOS : 0
Survey X offset bpmA : -0.63
Survey Y offset bpmA : -0.9
Survey X offset bpmB : 0.77 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
Survey Y offset bpmB : -1
Target OTR x-position : -7.9589
Target OTR y-position : 7.73516
Target OTR x-width : 0
Target OTR y-width : -0
Target OTR data valid flag : No
Target OTR In/Out : OTR is Out
Arc OTR x-position : -10.5973
Arc OTR y-position : 8.6014
Arc OTR x-width : 0
Arc OTR y-width : -0
Arc OTR data valid flag : No
Arc OTR In/Out : Current is Low
Current Setpoint :
Current Readback :
fan frequency loop 1 :
fan frequency loop 2 :
fan frequency loop 3 :
Encoder position :
temperature loop 1 :
temperature loop 1 :
temperature loop 1 :
temperature loop 2 :
temperature loop 2 :
temperature loop 2 :
temperature loop 3 :
temperature loop 3 :
temperature loop 3 :
pressure loop D2 :
pressure loop H2 :