• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT

    User name a-onl

    Log entry time 08:48:30 on October 8, 2002

    Entry number 87617

    keyword=End_of_Run_1230
    ****************************
     Run Number: 1230
     End of Run Comment:
    Run_type=production,beam_energy=2.056,beam_raster=on,comment_text=LD2 with radiator,daq_mode=Coinc (buffered),kin_name=,leftarm_p=2428,leftarm_theta=19.873,rightarm_p=976.3,rightarm_theta=56.999,target_type=15cm LD2
    MCC Changed Injector Optics
    
    PRESCALE FACTORS:ps1=7   ps2=70   ps3=3   ps4=40   ps5=1   ps6=65535   ps7=65535   ps8=65535   
    
    EVENTS[0]: 746737       [+]: 333651       [-]: 333254       
    TIME  [0]: 41.121 mins  [+]: 20.250 mins  [-]: 20.250 mins  
    LIVE  [0]: 110.46%      [+]: 100.21%      [-]: 100.29%      
    
    TRIGGER RATES:   PRES/REAL
    T1[0] :111.9/783.1 Hz   T2[0] : 5.9/414.0 Hz   T3[0] :156.0/467.9 Hz   T4[0] : 0.2/7.4  Hz   T5[0] : 0.1/0.1  Hz   T8[0] : 0.0/1024.0 Hz   
    T1[+] :112.0/783.8 Hz   T2[+] : 5.9/413.6 Hz   T3[+] :156.1/468.2 Hz   T4[+] : 0.0/0.0  Hz   T5[+] : 0.1/0.1  Hz   T8[+] : 0.0/1024.0 Hz   
    T1[-] :111.7/781.9 Hz   T2[-] : 5.9/414.4 Hz   T3[-] :155.8/467.4 Hz   T4[-] : 0.0/0.0  Hz   T5[-] : 0.1/0.1  Hz   T8[-] : 0.0/1024.0 Hz   
    
    TRIGGER TOTALS:   PRES/REAL
    T1[0] : 276009/1932063  T2[0] :  14592/1021509  T3[0] : 384790/1154372  T4[0] :    455/18233    T5[0] :    129/129      T8[0] :     38/2526447  
    T1[+] : 136046/952324   T2[+] :   7178/502475   T3[+] : 189643/568929   T4[+] :      0/0        T5[+] :     65/65       T8[+] :     18/1244180  
    T1[-] : 135719/950036   T2[-] :   7192/503477   T3[-] : 189293/567880   T4[-] :      0/0        T5[-] :     62/62       T8[-] :     18/1244189  
    
    AVERAGE CURRENT
    BCM x1 : 14.7033uA  BCM x3 : 7.5007 uA  BCM x10: 14.6926uA  
    
    APPROXIMATE CURRENT ASYMMETRIES
    BCM u1 :    778.3 ppm     BCM u3 :    775.6 ppm     BCM u10:    778.4 ppm     
    BCM d1 :    786.3 ppm     BCM d3 :    1E+39 ppm     BCM d10:    776.5 ppm     
    
    APPROXIMATE BCM CHARGES (C)
    BCM u1 [0]:0.03715        BCM u3 [0]:0.03708        BCM u10[0]:0.03712        
    BCM u1 [+]:0.01831        BCM u3 [+]:0.01827        BCM u10[+]:0.01829        
    BCM u1 [-]:0.01828        BCM u3 [-]:0.01824        BCM u10[-]:0.01827        
    
    BCM d1 [0]:0.0354         BCM d3 [0]:-6.48E-05      BCM d10[0]:0.03538        
    BCM d1 [+]:0.01745        BCM d3 [+]:-3.191E-05     BCM d10[+]:0.01744        
    BCM d1 [-]:0.01742        BCM d3 [-]:-3.191E-05     BCM d10[-]:0.01741        
    
    
    
    ****************************
    End-of-run EPICS data for Run Number 1230 at Tue Oct 8 08:45:23 EDT 2002
    Left Arm D1 momentum : 2.42799
    Left Arm arm angle : 19.8729
    Right Arm D1 momentum : 0.97633
    Right Arm arm angle : 56.9987
    Tiefenbach Hall A energy : 2057.18
    Left Arm arm mispointing (HPT) :
    Right Arm arm mispointing (HPT) : -0
    Left Arm Top VDC Current : -0.634766
    Left Arm Bottom VDC Current : -1.46484
    Right Arm Top VDC Current :
    Right Arm Bottom VDC Current :
    Left Arm Q1 power supply current :
    Left Arm Q1 momentum : 2.42801
    Left Arm Q1 gauss meter :
    Left Arm Q1 power supply polarity :
    Left Arm Q2 power supply current : 1045.63
    Left Arm Q2 momentum : 2.42794
    Left Arm Q2 gauss meter :
    Left Arm Q2 power supply polarity : enabled
    Left Arm D1 power supply current : 835.276
    Left Arm D1 momentum : 2.42799
    Left Arm D1 NMR : 0.898589
    Left Arm Q3 power supply current : 966.672
    Left Arm Q3 momentum : 2.4281
    Left Arm Q3 gauss meter :
    Left Arm Q3 power supply polarity : enabled
    Right Arm Q1 power supply current :
    Right Arm Q1 momentum : 0.976317
    Right Arm Q1 gauss meter : -0.018289
    Right Arm Q1 power supply polarity :
    Right Arm Q2 power supply current : 420.139
    Right Arm Q2 momentum : 0.976235
    Right Arm Q2 gauss meter : 0.2208
    Right Arm Q2 power supply polarity : enabled
    Right Arm D1 power supply current : 333.016
    Right Arm D1 momentum : 0.976329
    Right Arm D1 NMR : 0.362304
    Right Arm Q3 power supply current : 388.433
    Right Arm Q3 momentum : 0.976187
    Right Arm Q3 gauss meter : 0.17418
    Right Arm Q3 power supply polarity : disabled
    Average current of the two cavities : 17.608
    Current on Unser monitor : 11.6571
    Current on Upstream bcm : 18.0059
    Current on Downstream bcm : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 17.2244
    Upstream Cavity Coefficient : 76.7
    Downstream Cavity Coefficient : 78.9
    Current on IBC0L02 (source) : 19.5705
    MBSY1c Hall A Beam energy : 2059.87
    MBSY1c magnet current (amp) : 85.6998
    MBSY1c Bdl : 514043
    MBSY3c Hall C Beam energy : 1058.99
    Tiefenbach Hall A energy : 2057.18
    Tiefenbach Hall C energy : 1056.75
    Delta(E)/E width (MV_AI_DXWID) : 0.923149
    IPM1C12.XPOS : 1.56
    IPM1H04A.XPOS : 0.282962
    IPM1H04A.YPOS : 0.0298449
    IPM1H04B.XPOS : 0.426702
    IPM1H04B.YPOS : -0.041274
    Left Arm Collimator : 0.871631
    Left LVDT HPM :
    Left LVDT VPM :
    HacL_HPE1313A:0_Ch58 : -0.126465
    HacL_HPE1313A:0_Ch55 : 23.1934
    HacL_HPE1313A:0_Ch54 : -0.0834961
    HacL_alignROLL :
    HacL_alignPITCH :
    HacL_alignHPT :
    Right Arm Collimator : 0.612842
    Right LVDT HPM : 563
    Right LVDT VPM : -983
    HacR_HPE1313A:0_Ch58 : -0.509766
    HacR_HPE1313A:0_Ch55 : 22.3145
    HacR_HPE1313A:0_Ch54 : -0.845703
    HacR_alignROLL : 0.466989
    HacR_alignPITCH : -0.489172
    HacR_alignHPT : -0
    Wien angle : -30.0394
    Helicity Mode ON/OFF Random/Toggle : OFF
    Wien BDL : -693.69
    Wien field : 19.945
    Laser attenuation Hall A : 550
    Laser power Hall A : 100
    Half-wave plate (off=out) : OUT
    Beam Half-wave plate (off=out) : OUT
    G0 Helicity Settle Set : 500 usec
    G0 Helicity Delay Set : 8 cycles
    G0 Helicity Pattern Set : Quartet
    G0 Helicity Settle Read : 500 usec
    G0 Helicity Delay Read : 8 cycles
    G0 Helicity Pattern : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. Quartet
    Target OTR x-position : 0.0728057
    Target OTR y-position : -0.217477
    Target OTR x-width : 3.21047
    Target OTR y-width : 0.466988
    Target OTR data valid flag : No
    Target OTR In/Out : OTR is Out
    Arc OTR x-position : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. -10.5973
    Arc OTR y-position : 8.6014
    Arc OTR x-width : 0
    Arc OTR y-width : -0
    Arc OTR data valid flag : No
    Arc OTR In/Out : OTR is Out
    fan frequency loop 1 : 0
    fan frequency loop 2 : 66.5
    fan frequency loop 3 : 0
    Encoder position : 4.85217e+06
    temperature loop 1 : 23.4
    temperature loop 1 : 23.61
    temperature loop 1 : 92.83
    temperature loop 2 : 22
    temperature loop 2 : 22
    temperature loop 2 : 22.14
    temperature loop 3 : 94.98
    temperature loop 3 : 94.98
    temperature loop 3 : 94.98
    pressure loop D2 : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 23.5218
    pressure loop H2 : 22.3255
    FPP HV 7.1.0 of chamber 1 : 1774.5
    FPP HV 7.1.1.of chamber 1 : 1774.5
    FPP HV 7.1.2 of chamber 1 : 1774.5
    FPP HV 7.1.3 of chamber 1 : 1774.5
    FPP HV 7.1.4 of chamber 1 : 1774.5
    FPP HV 7.1.5 of chamber 1 : 1774.5
    FPP HV 7.1.8 of chamber 2 : 1772.9
    FPP HV 7.1.9.of chamber 2 : 1772.9
    FPP HV 7.1.10 of chamber 2 : 1772.9
    FPP HV 7.1.11 of chamber 2 : 1772.9
    FPP HV 7.1.12 of chamber 2 : 1772.9
    FPP HV 7.1.13 of chamber 2 : 1772.9
    FPP HV 8.1.0 of chamber 3 : 1776.2
    FPP HV 8.1.1.of chamber 3 : 1776.2
    FPP HV 8.1.2 of chamber 3 : 1776.2
    FPP HV 8.1.3 of chamber 3 : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 1776.2
    FPP HV 8.1.4 of chamber 3 : 1776.2
    FPP HV 8.1.5 of chamber 3 : 1776.2
    FPP HV 8.1.8 of chamber 4 : 1774.7
    FPP HV 8.1.9.of chamber 4 : 1774.7
    FPP HV 8.1.10 of chamber 4 : 1774.7
    FPP HV 8.1.11 of chamber 4 : 1774.7
    FPP HV 8.1.12 of chamber 4 : 1774.7
    FPP HV 8.1.13 of chamber 4 : 1774.7