• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT

    User name a-onl

    Log entry time 17:44:58 on October 15, 2002

    Entry number 88285

    keyword=End_of_Run_1513
    ****************************
     Run Number: 1513
     End of Run Comment:
    Run_type=production,beam_energy=2.056,beam_raster=on,comment_text=15 cm LD2 + rad, Rt arm tirgges disabled,daq_mode=Coinc (buffered),kin_name=70_CM,leftarm_p=2011.0,leftarm_theta=39.754,rightarm_p=249.49,rightarm_theta=57,target_type=15cm LD2
     
    
    PRESCALE FACTORS:ps1=180   ps2=50   ps3=1   ps4=7   ps5=1   ps6=65535   ps7=65535   ps8=65535   
    
    EVENTS[0]: 1003342      [+]: 480511       [-]: 480915       
    TIME  [0]: 17.913 mins  [+]: 8.818 mins  [-]: 8.817 mins  
    LIVE  [0]:  97.52%      [+]:  94.86%      [-]:  94.95%      
    
    TRIGGER RATES:   PRES/REAL
    T1[0] :195.1/35117.1 Hz   T2[0] :63.9/3195.0 Hz   T3[0] :657.0/657.0 Hz   T4[0] :38.6/270.0 Hz   T5[0] : 2.7/2.7  Hz   T8[0] : 0.0/1024.0 Hz   
    T1[+] :195.1/35122.5 Hz   T2[+] :64.0/3198.6 Hz   T3[+] :656.9/656.9 Hz   T4[+] :38.6/270.0 Hz   T5[+] : 2.8/2.8  Hz   T8[+] : 0.0/1024.0 Hz   
    T1[-] :195.0/35093.8 Hz   T2[-] :63.8/3190.9 Hz   T3[-] :657.3/657.3 Hz   T4[-] :38.6/269.9 Hz   T5[-] : 2.7/2.7  Hz   T8[-] : 0.0/1024.0 Hz   
    
    TRIGGER TOTALS:   PRES/REAL
    T1[0] : 209683/37743038  T2[0] :  68679/3433955  T3[0] : 706154/706154   T4[0] :  41448/290142   T5[0] :   2930/2930     T8[0] :     16/1100571  
    T1[+] : 103235/18582354  T2[+] :  33845/1692298  T3[+] : 347574/347574   T4[+] :  20404/142828   T5[+] :   1461/1461     T8[+] :      8/541770   
    T1[-] : 103144/18565939  T2[-] :  33761/1688085  T3[-] : 347761/347761   T4[-] :  20400/142805   T5[-] :   1434/1434     T8[-] :      8/541734   
    
    AVERAGE CURRENT
    BCM x1 : 35.4696uA  BCM x3 : 17.9721uA  BCM x10: 35.4038uA  
    
    APPROXIMATE CURRENT ASYMMETRIES
    BCM u1 :    223.8 ppm     BCM u3 :    216.2 ppm     BCM u10:    218.3 ppm     
    BCM d1 :    222.8 ppm     BCM d3 :    1E+39 ppm     BCM d10:    211.7 ppm     
    
    APPROXIMATE BCM CHARGES (C)
    BCM u1 [0]:0.03869        BCM u3 [0]:0.03866        BCM u10[0]:0.0387         
    BCM u1 [+]:0.01905        BCM u3 [+]:0.01903        BCM u10[+]:0.01905        
    BCM u1 [-]:0.01904        BCM u3 [-]:0.01903        BCM u10[-]:0.01905        
    
    BCM d1 [0]:0.03755        BCM d3 [0]:-2.823E-05     BCM d10[0]:0.0374         
    BCM d1 [+]:0.01849        BCM d3 [+]:-1.39E-05      BCM d10[+]:0.01842        
    BCM d1 [-]:0.01848        BCM d3 [-]:-1.39E-05      BCM d10[-]:0.01841        
    
    
    
    ****************************
    End-of-run EPICS data for Run Number 1513 at Tue Oct 15 17:44:18 EDT 2002
    Left Arm D1 momentum : 2.011
    Left Arm arm angle : 39.7541
    Right Arm D1 momentum : 0
    Right Arm arm angle : 56.9987
    Tiefenbach Hall A energy : 2057.61
    Left Arm arm mispointing (HPT) :
    Right Arm arm mispointing (HPT) : -0
    Left Arm Top VDC Current : -2.97852
    Left Arm Bottom VDC Current : -2.39258
    Right Arm Top VDC Current :
    Right Arm Bottom VDC Current :
    Left Arm Q1 power supply current :
    Left Arm Q1 momentum : 2.01095
    Left Arm Q1 gauss meter :
    Left Arm Q1 power supply polarity :
    Left Arm Q2 power supply current : 865.997
    Left Arm Q2 momentum : 2.01114
    Left Arm Q2 gauss meter :
    Left Arm Q2 power supply polarity : enabled
    Left Arm D1 power supply current : 682.98
    Left Arm D1 momentum : 2.011
    Left Arm D1 NMR : 0.744135
    Left Arm Q3 power supply current : 800.526
    Left Arm Q3 momentum : 2.01077
    Left Arm Q3 gauss meter :
    Left Arm Q3 power supply polarity : enabled
    Right Arm Q1 power supply current :
    Right Arm Q1 momentum : 0.198587
    Right Arm Q1 gauss meter : -0.003784
    Right Arm Q1 power supply polarity :
    Right Arm Q2 power supply current : 85.4736
    Right Arm Q2 momentum : 0.198606
    Right Arm Q2 gauss meter : 0.04538
    Right Arm Q2 power supply polarity : enabled
    Right Arm D1 power supply current : 72.1864
    Right Arm D1 momentum : 0
    Right Arm D1 NMR : 0.410877
    Right Arm Q3 power supply current : 78.9874
    Right Arm Q3 momentum : 0.198506
    Right Arm Q3 gauss meter : 0.0356
    Right Arm Q3 power supply polarity : disabled
    Average current of the two cavities : 34.9706
    Current on Unser monitor : 29.7967
    Current on Upstream bcm : 35.4611
    Current on Downstream bcm : 34.48
    Upstream Cavity Coefficient : 76.7
    Downstream Cavity Coefficient : 78.9
    Current on IBC0L02 (source) : 50.7151
    MBSY1c Hall A Beam energy : 2059.87
    MBSY1c magnet current (amp) : 85.6998
    MBSY1c Bdl : 514042
    MBSY3c Hall C Beam energy : 1058.99
    Tiefenbach Hall A energy : 2057.6
    Tiefenbach Hall C energy : 1056.75
    Delta(E)/E width (MV_AI_DXWID) : 0.874202
    IPM1C12.XPOS : 0.0182768
    IPM1H04A.XPOS : -0.0854906
    IPM1H04A.YPOS : 0.00410259
    IPM1H04B.XPOS : -0.0725668
    IPM1H04B.YPOS : -0.0669626
    Left Arm Collimator : 0.871777
    Left LVDT HPM :
    Left LVDT VPM :
    HacL_HPE1313A:0_Ch58 : -0.203613
    HacL_HPE1313A:0_Ch55 : 24.4141
    HacL_HPE1313A:0_Ch54 : -0.287598
    HacL_alignROLL :
    HacL_alignPITCH :
    HacL_alignHPT :
    Right Arm Collimator : 0.612793
    Right LVDT HPM : 621
    Right LVDT VPM : -1093
    HacR_HPE1313A:0_Ch58 : -0.492188
    HacR_HPE1313A:0_Ch55 : 23.4863
    HacR_HPE1313A:0_Ch54 : -0.835938
    HacR_alignROLL : 0.466989
    HacR_alignPITCH : -0.489172
    HacR_alignHPT : -0
    Wien angle : -30.0394
    Helicity Mode ON/OFF Random/Toggle : OFF
    Wien BDL : -693.69
    Wien field : 19.945
    Laser attenuation Hall A : 600
    Laser power Hall A : 65
    Half-wave plate (off=out) : OUT
    Beam Half-wave plate (off=out) : OUT
    G0 Helicity Settle Set : 500 usec
    G0 Helicity Delay Set : 8 cycles
    G0 Helicity Pattern Set : Quartet
    G0 Helicity Settle Read : 500 usec
    G0 Helicity Delay Read : 8 cycles
    G0 Helicity Pattern : Quartet
    Target OTR x-position : 0.155541
    Target OTR y-position : 1.02343
    Target OTR x-width : 0.564
    Target OTR y-width : 0.540817
    Target OTR data valid flag : No !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
    Target OTR In/Out : MaxPix is Bad
    Arc OTR x-position : -2.0647
    Arc OTR y-position : -0.139757
    Arc OTR x-width : 2.96554 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
    Arc OTR y-width : 3.03809
    Arc OTR data valid flag : No
    Arc OTR In/Out : OTR is Out
    fan frequency loop 1 : 0
    fan frequency loop 2 : 69
    fan frequency loop 3 : 0
    Encoder position : 4.82145e+06
    temperature loop 1 : 26.93
    temperature loop 1 : 27.17
    temperature loop 1 : 92.83
    temperature loop 2 : 22
    temperature loop 2 : 22
    temperature loop 2 : 22.23
    temperature loop 3 : 94.98
    temperature loop 3 : 94.98
    temperature loop 3 : 94.98
    pressure loop D2 : 25.8228
    pressure loop H2 : 22.3041
    FPP HV 7.1.0 of chamber 1 : 1774.5 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
    FPP HV 7.1.1.of chamber 1 : 1774.5
    FPP HV 7.1.2 of chamber 1 : 1774.5
    FPP HV 7.1.3 of chamber 1 : 1774.5
    FPP HV 7.1.4 of chamber 1 : 1774.5
    FPP HV 7.1.5 of chamber 1 : 1774.5
    FPP HV 7.1.8 of chamber 2 : 1772.9
    FPP HV 7.1.9.of chamber 2 : 1772.9
    FPP HV 7.1.10 of chamber 2 : 1772.9
    FPP HV 7.1.11 of chamber 2 : 1772.9
    FPP HV 7.1.12 of chamber 2 : 1772.9
    FPP HV 7.1.13 of chamber 2 : 1772.9
    FPP HV 8.1.0 of chamber 3 : 1775.3
    FPP HV 8.1.1.of chamber 3 : 1775.3
    FPP HV 8.1.2 of chamber 3 : 1775.3
    FPP HV 8.1.3 of chamber 3 : 1775.3
    FPP HV 8.1.4 of chamber 3 : 1775.3
    FPP HV 8.1.5 of chamber 3 : 1775.3
    FPP HV 8.1.8 of chamber 4 : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 1775.6
    FPP HV 8.1.9.of chamber 4 : 1775.6
    FPP HV 8.1.10 of chamber 4 : 1775.6
    FPP HV 8.1.11 of chamber 4 : 1775.6
    FPP HV 8.1.12 of chamber 4 : 1775.6
    FPP HV 8.1.13 of chamber 4 : 1775.6