• Main INDEX
  • Monthly INDEX
  • PREV
  • NEXT

    User name a-onl

    Log entry time 18:05:25 on October 15, 2002

    Entry number 88288

    keyword=End_of_Run_1514
    ****************************
     Run Number: 1514
     End of Run Comment:
    Run_type=production,beam_energy=2.056,beam_raster=on,comment_text=15 cm LD2 + rad, Rt arm tirgges disabled,daq_mode=Coinc (buffered),kin_name=70_CM,leftarm_p=2011.0,leftarm_theta=39.754,rightarm_p=249.49,rightarm_theta=57,target_type=15cm LD2
     
    
    PRESCALE FACTORS:ps1=180   ps2=50   ps3=1   ps4=7   ps5=1   ps6=65535   ps7=65535   ps8=65535   
    
    EVENTS[0]: 1001164      [+]: 478368       [-]: 479695       
    TIME  [0]: 18.481 mins  [+]: 9.097 mins  [-]: 9.097 mins  
    LIVE  [0]:  97.62%      [+]:  94.88%      [-]:  94.93%      
    
    TRIGGER RATES:   PRES/REAL
    T1[0] :187.6/33773.6 Hz   T2[0] :61.6/3082.5 Hz   T3[0] :635.6/635.6 Hz   T4[0] :37.4/261.5 Hz   T5[0] : 2.6/2.6  Hz   T8[0] : 0.0/1024.0 Hz   
    T1[+] :187.6/33771.4 Hz   T2[+] :61.7/3082.8 Hz   T3[+] :634.3/634.3 Hz   T4[+] :37.4/261.9 Hz   T5[+] : 2.6/2.6  Hz   T8[+] : 0.0/1024.0 Hz   
    T1[-] :187.6/33759.3 Hz   T2[-] :61.6/3080.9 Hz   T3[-] :636.8/636.8 Hz   T4[-] :37.3/260.8 Hz   T5[-] : 2.6/2.6  Hz   T8[-] : 0.0/1024.0 Hz   
    
    TRIGGER TOTALS:   PRES/REAL
    T1[0] : 208059/37450671  T2[0] :  68361/3418086  T3[0] : 704832/704832   T4[0] :  41424/289973   T5[0] :   2894/2894     T8[0] :     17/1135486  
    T1[+] : 102409/18433767  T2[+] :  33653/1682698  T3[+] : 346228/346228   T4[+] :  20424/142971   T5[+] :   1437/1437     T8[+] :      8/558940   
    T1[-] : 102372/18427080  T2[-] :  33633/1681670  T3[-] : 347563/347563   T4[-] :  20333/142336   T5[-] :   1418/1418     T8[-] :      8/558938   
    
    AVERAGE CURRENT
    BCM x1 : 34.2460uA  BCM x3 : 17.3454uA  BCM x10: 34.1847uA  
    
    APPROXIMATE CURRENT ASYMMETRIES
    BCM u1 :    242.2 ppm     BCM u3 :    232.8 ppm     BCM u10:      236 ppm     
    BCM d1 :      242 ppm     BCM d3 :    1E+39 ppm     BCM d10:    229.5 ppm     
    
    APPROXIMATE BCM CHARGES (C)
    BCM u1 [0]:0.03853        BCM u3 [0]:0.0385         BCM u10[0]:0.03854        
    BCM u1 [+]:0.01897        BCM u3 [+]:0.01895        BCM u10[+]:0.01897        
    BCM u1 [-]:0.01896        BCM u3 [-]:0.01894        BCM u10[-]:0.01896        
    
    BCM d1 [0]:0.03742        BCM d3 [0]:-2.913E-05     BCM d10[0]:0.03728        
    BCM d1 [+]:0.01842        BCM d3 [+]:-1.434E-05     BCM d10[+]:0.01835        
    BCM d1 [-]:0.01841        BCM d3 [-]:-1.434E-05     BCM d10[-]:0.01834        
    
    
    
    ****************************
    End-of-run EPICS data for Run Number 1514 at Tue Oct 15 18:03:29 EDT 2002
    Left Arm D1 momentum : 2.011
    Left Arm arm angle : 39.7541
    Right Arm D1 momentum : 0
    Right Arm arm angle : 56.9987
    Tiefenbach Hall A energy : 2057.61
    Left Arm arm mispointing (HPT) :
    Right Arm arm mispointing (HPT) : -0
    Left Arm Top VDC Current : -2.97852
    Left Arm Bottom VDC Current : -1.2207
    Right Arm Top VDC Current :
    Right Arm Bottom VDC Current :
    Left Arm Q1 power supply current :
    Left Arm Q1 momentum :
    Left Arm Q1 gauss meter :
    Left Arm Q1 power supply polarity :
    Left Arm Q2 power supply current : 865.885
    Left Arm Q2 momentum : 2.01088
    Left Arm Q2 gauss meter :
    Left Arm Q2 power supply polarity : enabled
    Left Arm D1 power supply current : 682.979
    Left Arm D1 momentum : 2.011
    Left Arm D1 NMR : 0.744138
    Left Arm Q3 power supply current : 800.584
    Left Arm Q3 momentum : 2.01073
    Left Arm Q3 gauss meter :
    Left Arm Q3 power supply polarity : enabled
    Right Arm Q1 power supply current : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
    Right Arm Q1 momentum : 0.198516
    Right Arm Q1 gauss meter : -0.003774
    Right Arm Q1 power supply polarity :
    Right Arm Q2 power supply current : 85.4607
    Right Arm Q2 momentum : 0.198576
    Right Arm Q2 gauss meter : 0.04536
    Right Arm Q2 power supply polarity : enabled
    Right Arm D1 power supply current : 72.1853
    Right Arm D1 momentum : 0
    Right Arm D1 NMR : 0.395259
    Right Arm Q3 power supply current : 78.9941
    Right Arm Q3 momentum : 0.198523
    Right Arm Q3 gauss meter : 0.03559
    Right Arm Q3 power supply polarity : disabled
    Average current of the two cavities : 35.0184
    Current on Unser monitor : 30.5249
    Current on Upstream bcm : 35.4968
    Current on Downstream bcm : 34.4626
    Upstream Cavity Coefficient : 76.7
    Downstream Cavity Coefficient : 78.9
    Current on IBC0L02 (source) : 50.8091
    MBSY1c Hall A Beam energy : 2059.87
    MBSY1c magnet current (amp) : 85.6998
    MBSY1c Bdl : 514042
    MBSY3c Hall C Beam energy : 1058.99
    Tiefenbach Hall A energy : 2057.6
    Tiefenbach Hall C energy : 1056.75
    Delta(E)/E width (MV_AI_DXWID) : 1.52276
    IPM1C12.XPOS : 0.0315864
    IPM1H04A.XPOS : -0.0796035
    IPM1H04A.YPOS : -0.00108206
    IPM1H04B.XPOS : -0.0616313 !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur.
    IPM1H04B.YPOS : -0.0811504
    Left Arm Collimator : 0.871777
    Left LVDT HPM :
    Left LVDT VPM :
    HacL_HPE1313A:0_Ch58 : -0.203125
    HacL_HPE1313A:0_Ch55 : 24.4141
    HacL_HPE1313A:0_Ch54 : -0.287598
    HacL_alignROLL :
    HacL_alignPITCH :
    HacL_alignHPT :
    Right Arm Collimator : 0.612793
    Right LVDT HPM : 623
    Right LVDT VPM : -1096
    HacR_HPE1313A:0_Ch58 : -0.491699
    HacR_HPE1313A:0_Ch55 : 23.5352
    HacR_HPE1313A:0_Ch54 : -0.834961
    HacR_alignROLL : 0.466989
    HacR_alignPITCH : -0.489172
    HacR_alignHPT : -0
    Wien angle : -30.0394
    Helicity Mode ON/OFF Random/Toggle : OFF
    Wien BDL : -693.69
    Wien field : !!WARNING!! The executable "caRepeater" couldnt be located because of errno = "No such file or directory" You may need to modify your PATH environment variable. Creating CA repeater with fork() system call. Repeater will inherit parents process name and resources. Duplicate resource consumption may occur. 19.945
    Laser attenuation Hall A : 600
    Laser power Hall A : 65
    Half-wave plate (off=out) : OUT
    Beam Half-wave plate (off=out) : OUT
    G0 Helicity Settle Set : 500 usec
    G0 Helicity Delay Set : 8 cycles
    G0 Helicity Pattern Set : Quartet
    G0 Helicity Settle Read : 500 usec
    G0 Helicity Delay Read : 8 cycles
    G0 Helicity Pattern : Quartet
    Target OTR x-position : 0.161863
    Target OTR y-position : 1.02182
    Target OTR x-width : 0.543027
    Target OTR y-width : 0.499735
    Target OTR data valid flag : No
    Target OTR In/Out : MaxPix is Bad
    Arc OTR x-position : -2.06492
    Arc OTR y-position : -0.081328
    Arc OTR x-width : 2.96608
    Arc OTR y-width : 3.038
    Arc OTR data valid flag : No
    Arc OTR In/Out : OTR is Out
    fan frequency loop 1 : 0
    fan frequency loop 2 : 70.5
    fan frequency loop 3 : 0
    Encoder position : 4.82145e+06
    temperature loop 1 : 26.97
    temperature loop 1 : 27.2
    temperature loop 1 : 92.83
    temperature loop 2 : 22
    temperature loop 2 : 22
    temperature loop 2 : 22.23
    temperature loop 3 : 94.98
    temperature loop 3 : 94.98
    temperature loop 3 : 94.98
    pressure loop D2 : 25.8976
    pressure loop H2 : 22.4613
    FPP HV 7.1.0 of chamber 1 : 1774.5
    FPP HV 7.1.1.of chamber 1 : 1774.5
    FPP HV 7.1.2 of chamber 1 : 1774.5
    FPP HV 7.1.3 of chamber 1 : 1774.5
    FPP HV 7.1.4 of chamber 1 : 1774.5
    FPP HV 7.1.5 of chamber 1 : 1774.5
    FPP HV 7.1.8 of chamber 2 : 1772.9
    FPP HV 7.1.9.of chamber 2 : 1772.9
    FPP HV 7.1.10 of chamber 2 : 1772.9
    FPP HV 7.1.11 of chamber 2 : 1772.9
    FPP HV 7.1.12 of chamber 2 : 1772.9
    FPP HV 7.1.13 of chamber 2 : 1772.9
    FPP HV 8.1.0 of chamber 3 : 1775.3
    FPP HV 8.1.1.of chamber 3 : 1775.3
    FPP HV 8.1.2 of chamber 3 : 1775.3
    FPP HV 8.1.3 of chamber 3 : 1775.3
    FPP HV 8.1.4 of chamber 3 : 1775.3
    FPP HV 8.1.5 of chamber 3 : 1775.3
    FPP HV 8.1.8 of chamber 4 : 1775.6
    FPP HV 8.1.9.of chamber 4 : 1775.6
    FPP HV 8.1.10 of chamber 4 : 1775.6
    FPP HV 8.1.11 of chamber 4 : 1775.6
    FPP HV 8.1.12 of chamber 4 : 1775.6
    FPP HV 8.1.13 of chamber 4 : 1775.6